Proud to be a UK-based company
Contact us
Important compatibility info
| Opening Temperature | 71 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (11119)
- 1x Febi Seal, thermostat (10258)
£18.02
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 445 mm |
| Housing Diameter | 18 mm. 242 mm |
| Eject Force | 300 N |
| Stroke | 173 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 241.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 94.6 mm |
| Width | 52 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Length | 238 mm |
| Material | Paper |
| Outer diameter | 165 mm |
| Inner diameter | 93 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Replaces | 23128; 33982 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 210 mm |
| Paired article numbers | 39039 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Length | 236 mm |
| Housing Diameter | 15 mm |
| Eject Force | 85 N |
| Stroke | 80 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 133 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Intake Hose, air filter |
| for OE number | 13 54 1 740 931 |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (49037)
- 2x Febi Clamping Bolt, ball joint (32414)
£18.02
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Material | PU (Polyurethane), Plastic |
| Width | 87 mm |
| Length | 208 mm |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (108831)
- 2x Febi Rubber Buffer, suspension (38574)
£18.02
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Placement on Vehicle | Left |
| Type | Gasket, cylinder head cover |
| for OE number | 07L 103 483 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 86.8 mm |
| Width | 70.3 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 19.7 mm |
| Mounting points diameter | 10.5 mm |
| Function | Ball Joint |
| External Thread Size | M18 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Width | 63 mm |
| Length | 126 mm |
| Placement on Vehicle | Rear Axle |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Replaces | 174859 |
| Width | 40 mm |
| Additional Information | with Split Pin |
| Outer diameter | 80 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring |
| Inner diameter | 43 mm |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Split Pin (173993)
£18.03
Important compatibility info
| Function | Switch, clutch control (cruise control) |
| Type | Switch, clutch control (cruise control) |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Cable Length | 360 mm |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Inner diameter | 18 mm |
| Placement on Vehicle | Rear Axle Left, Rear |
| Outer diameter | 68 mm |
| Thickness | 60 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, differential |
| Material | Rubber/Metal |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023