Important compatibility info
| Length | 455 mm |
| Housing Diameter | 19 mm |
| Eject Force | 700 N |
| Stroke | 115 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 309.5 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Wheel Side |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Length | 108 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (30084)
- 1x Febi Clamping Clip (45645)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (27214)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Function | Repair Kit, spring bolt |
| Type | Repair Kit, spring bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Spring Bolt (03126)
- 1x Febi Bush, spring shackle (01491)
- 2x Febi Seal Ring (03994)
- 1x Febi Washer (03990)
- 1x Febi Washer (04835)
- 1x Febi Screw (02684)
- 1x Febi Washer (01965)
- 1x Febi Nut (02685)
- 1x Febi Grease Nipple (01096)
- 1x Febi Grease Nipple (01098)
Important compatibility info
| Function | Stop Light Switch |
| Operating Mode | Electric |
| for OE number | 1 066 389 |
| Number of Connectors / Ports | 2 |
| Housing Colour | grey |
| Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Switch, tailgate release |
| Type | Switch, tailgate release |
| Number of Connectors / Ports | 2 |
| for OE number | 6554.V5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Tie Rod End |
| Length | 232 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with lock nut |
| Paired article numbers | 193876 |
| External Thread Size | M10 x 1,25 |
| Function | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, outer |
| Length | 425 mm |
| Additional Information 2 | with banjo bolt, with seal ring |
| Type | Brake Hose |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 159 mm |
| Additional Information | with lock nut |
| Spanner Size | 18 |
| Paired article numbers | 196319 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 159 mm |
| Additional Information | with lock nut |
| Spanner Size | 18 |
| Paired article numbers | 196317 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Guide Sleeve, clutch |
| Type | Guide Sleeve, clutch |
| for OE number | 2105.51 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| for OE number | 7 350 847 S1 |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09473)
- 1x Febi Rolling Bearing, suspension strut support mount (12469)
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 200 mm |
| Paired article numbers | 36095 |
| DIN / ISO | 985 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 95.6 mm |
| Width | 38 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
| Seal Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Outer diameter | 11 mm |
| Thread Length | 38 mm |
| Thickness | 83 mm |
| Length | 246 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M14 x 2 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 153 mm |
| Outer diameter | 108 mm |
| Filter type | Spin-on Filter |
| Seal Diameter | 103 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Length | 260 mm |
| Height | 114 mm |
| Width | 134 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2020 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 5 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Voltage | 24 V |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Length | 1620 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 7 mm |
| Function | Oil Separator, crankcase ventilation |
| for OE number | 272 016 01 34 |
| Additional Information 2 | with seal ring |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 73 mm |
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
| Width | 187 mm |
| Height | 52 mm |
| Length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 240 mm |
| Paired article numbers | 28580 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with counter nut |
| External Thread Size | M12 x 1,5, M14 x 1,5 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Cone Size | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (15430)
- 3x Febi Screw (12604)
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Additional Information 2 | with piston clip |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 20.2 mm |
| Inspection Tag | ECE R90 Approved |
| Brake System | ATE |
| Width | 64.6 mm |
| Length | 156.46 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Length | 417 mm |
| Housing Diameter | 18 mm |
| Eject Force | 390 N |
| Stroke | 132 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Housing length | 216.5 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Cable Length | 270 mm |
| Length | 350 mm |
| Type | Sensor, camshaft position |
| Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 34 mm |
| Outer diameter | 66 mm |
| Inner diameter | 52 mm |
| Number of Ribs | 7 |
| Function | Belt Pulley, alternator |
| Type | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Rear Axle |
| Width | 68.8 mm |
| Inspection Tag | ECE R90 Approved |
| Length | 88.2 mm |
| Thickness/Strength 1 | 16.5 mm |
| Type | Brake Pad Set, disc brake |
| Replaces | 116115 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























