Proud to be a UK-based company
Contact us
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Height | 177 mm |
| Outer diameter | 85 mm |
| Filter type | Spin-on Filter, with water drain screw |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Width | 13 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 175 mm |
| Inner diameter | 145 mm |
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | both sides |
| Length | 300 mm |
| Housing Diameter | 22 mm |
| Eject Force | 710 N |
| Stroke | 70 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Housing length | 311.5 mm |
| Mounting points diameter | 16.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Length | 190 mm |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Stroke | 256 mm |
| Housing Diameter | 18 mm |
| Eject Force | 370 N |
| Function | Gas Spring, front panel |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Housing length | 349 mm |
| Placement on Vehicle | Right Front |
| Length | 632 mm |
| Type | Gas Spring, front panel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Length | 162 mm |
| Housing Diameter | 16 mm |
| Eject Force | 400 N |
| Stroke | 42 mm |
| Mounting points diameter | 8.3 mm |
| Piston conrod diameter | 6 mm |
| Housing length | 98 mm |
| Type | Gas Spring, air deflector / Gas Spring, boot/cargo area |
| Function | Gas Spring, air deflector / Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Type | Gas Spring, front panel |
| Stroke | 150 mm |
| Eject Force | 100 N |
| Housing length | 202 mm |
| Housing Diameter | 15 mm |
| Mounting points diameter | 13 mm |
| Spanner Size | 13 |
| External Thread Size | M8 x 1 |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, front panel |
| Length | 375 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Length | 665 mm |
| Material | Steel |
| Function | High-pressure Pipe, injection system |
| Internal Thread Size | M14 x 1,5 |
| Type | High-pressure Pipe, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 66 mm |
| Inner diameter 1 | 24 mm |
| Length | 95 mm |
| Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175386)
- 1x Febi Molybdenum Grease (02582)
£18.69
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 785 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 197324 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 197323 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 2014 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Width | 39 mm |
| Outer diameter | 74 mm |
| Inner diameter | 39 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with Split Pin, with retaining rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (04852)
- 1x Febi Split Pin (02877)
- 2x Febi Circlip (04853)
£18.70
Important compatibility info
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Voltage | 12 V |
| Type | Washer Fluid Pump, window cleaning |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.70
Important compatibility info
| Width | 25 mm |
| Material | Plastic |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 75 mm. 124 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 44 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Wheel Bolt |
| Wheel Fastening | Conical Seat F |
| Thread Length | 25 mm |
| Surface | Chromed |
| Spanner Size | 17, 19 |
| Length | 51 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Screw length below head | 25 mm |
| Outer diameter | 23.7 mm |
| Material | Steel |
| Quality/ Grade | 8.8 |
| Type | Wheel Bolt |
| Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 245 mm |
| Housing Diameter | 16 mm |
| Eject Force | 400 N |
| Stroke | 74 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, bonnet |
| Housing length | 137 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 534 mm |
| Housing Diameter | 18 mm |
| Eject Force | 520 N |
| Stroke | 187 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 265.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023