Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Weight | 0.093 kg |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (108337)
- 4x Febi Seal Ring, spark plug shaft (106402)
£19.26
Important compatibility info
| Weight | 0.195 kg |
| Width | 30 mm |
| Material | Plastic |
| Outer diameter | 60 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 605 mm |
| Function | Brake Hose |
| Spanner Size | 11 |
| Type | Brake Hose |
| Weight | 0.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter | 54 mm |
| Weight | 0.197 kg |
| Placement on Vehicle | Left |
| Type | Charge Air Hose |
| Turbocharger line | Piping to turbocharger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.041 kg |
| Cable Length | 445 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 106716 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.325 kg |
| Placement on Vehicle | Right |
| Length | 570 mm |
| Paired article numbers | 24737 |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 254 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 326.5 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.33 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 111 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 58 mm |
| Additional Information 2 | without ball bearing |
| Inner diameter | 10 mm. 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Weight | 0.06 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket, cylinder head cover |
| Weight | 0.053 kg |
| Type | Gasket, cylinder head cover |
| for OE number | 13270-3HD0A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Gasket, cylinder head |
| Weight | 0.125 kg |
| Type | Gasket, cylinder head |
| for OE number | 026 103 383 P |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Paired article numbers | 23323 |
| Colour | Black |
| Cone Size | 15 mm |
| Placement on Vehicle | Front Axle Right |
| Weight | 0.780 kg |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M10 x 1,25, M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.04 kg |
| Cable Length | 584 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.1 kg |
| Opening Temperature | 84 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Material | Rubber/Metal |
| Function | Flange, central injection |
| Weight | 0.319 kg |
| Type | Flange, central injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.05 kg |
| Type | Mounting, engine |
| for OE number | 1844.47 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.401 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09496)
- 1x Febi Rolling Bearing, suspension strut support mount (12448)
£19.26
Important compatibility info
| Function | Ball Joint |
| Weight | 0.43 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 17.2 mm |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Material | Plastic |
| Outer diameter | 78 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.19 kg |
| Width of castor bearing surface | 25 mm |
| Additional Information 2 | with screw |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 5751.E4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.41 kg |
| Extra Description | ProKit |
| Height | 135 mm |
| Width | 115 mm |
| Rated Power | 27 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 36 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 2200 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Type | Worklight |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 119 mm |
| Placement on Vehicle | Front Axle |
| Height | 35 mm |
| Width | 120 mm |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Weight | 0.54 kg |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Type | Fuel filter |
| Filter type | In-Line Filter, with water separator |
| Length | 187 mm |
| Outer diameter | 80 mm |
| Weight | 0.457 kg |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Mounting and Bolting Kit, control/trailing arm |
| Steering arm type | Control Arm |
| for OE number | 191 407 153 S2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.739 kg |
| Type | Mounting and Bolting Kit, control/trailing arm |
| Additional Information 2 | without ball joint, with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (07856)
- 1x Febi Mounting, control/trailing arm (07847)
- 1x Febi Link/Coupling Rod, stabiliser bar (07863)
- 1x Febi Securing Plate, ball joint (07862)
- 3x Febi Clamping Bolt, ball joint (07866)
- 1x Febi Clamping Bolt, ball joint (03938)
- 1x Febi Sleeve, control arm mounting (03544)
£19.26
Important compatibility info
| Weight | 0.39 kg |
| Pipe Diameter | 14 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 204 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | Lower Right |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Weight | 0.264 kg |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.500 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 160 mm |
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
| Replaces | 39501 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Weight | 0.475 kg |
| Function | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Thickness | 90 mm |
| Material | Rubber/Metal |
| Width | 55 mm |
| Placement on Vehicle | Left |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 107 mm |
| Bolt Head/Nut Design | Male Torx |
| Quality/ Grade | 12.9 |
| Weight | 0.81 kg |
| Number of screws | 14 |
| Function | Cylinder Head Bolt Set |
| Screw length below head | 95 mm |
| Type | Cylinder Head Bolt Set |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 14x Febi Cylinder Head Bolt (04083)
£19.26
Important compatibility info
| Weight | 0.72 kg |
| Placement on Vehicle | Left Rear |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.685 kg |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 195 mm |
| Additional Information | with lock nut |
| Spanner Size | 15 |
| Paired article numbers | 109582 |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 87 mm |
| Inner diameter 1 | 28 mm |
| Material | Thermoplast |
| Length | 117 mm |
| Type | Bellow Kit, drive shaft |
| Replaces | 22981 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22979)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (22953)
- 2x Febi Molybdenum Grease (02582)
£19.26
Important compatibility info
| Weight | 0.086 kg |
| Width | 20 mm |
| Number of Teeth | 91 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 172424 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1095 mm |
| Weight | 0.061 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.17 kg |
| Material | PU (Polyurethane) |
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12485)
- 2x Febi Protective Cap/Bellow, shock absorber (12482)
£19.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 35 mm |
| Outer diameter 1 | 45 mm |
| Width 1 | 15.5 mm |
| Outer diameter 2 | 62 mm |
| Width 2 | 18 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Weight | 0.405 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (14496)
- 1x Febi Split Pin (02877)
£19.26
Important compatibility info
| Weight | 0.103 kg |
| Housing length | 150 mm |
| Mounting points diameter | 8.3 mm |
| Placement on Vehicle | both sides |
| Length | 272 mm |
| Eject Force | 300 N |
| Stroke | 90 mm |
| Housing Diameter | 16 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 445 mm |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 106750 |
| Placement on Vehicle | Rear Axle Left |
| Weight | 0.041 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 225 mm |
| Paired article numbers | 21494 |
| Quality/ Grade | 10 |
| Weight | 0.640 kg |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 1435 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Weight | 0.220 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Right |
| Length | 520 mm |
| Paired article numbers | 106103 |
| Type | Sensor, wheel speed |
| Weight | 0.036 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Intake Hose, air filter |
| Material | PVC, NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 72 mm |
| Colour | Black |
| Inner diameter 2 | 81 mm |
| Weight | 0.255 kg |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.95 kg |
| Placement on Vehicle | Rear Axle |
| Length | 102.3 mm |
| Width | 48.4 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 465 mm |
| Housing Diameter | 18 mm |
| Eject Force | 360 N |
| Stroke | 165 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 257.5 mm |
| Weight | 0.250 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.076 kg |
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Length | 47 mm |
| Spanner Size | 22 |
| Opening Pressure | 4.0 bar |
| Function | Overflow Valve |
| Type | Overflow Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.400 kg |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| External Thread Size | M8 x 1,5 |
| Type | Suspension Strut Support Mount |
| Height | 50 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.261 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 164 mm |
| Inner diameter | 136 mm |
| Number of Teeth, ABS ring | 100 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.685 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 195 mm |
| Spanner Size | 15 |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Paired article numbers | 109581 |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.16 kg |
| Function | Gasket, cylinder head cover |
| Material | Rubber |
| Length | 415 mm |
| Width | 254 mm |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | Left |
| Function | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Weight | 1.012 kg |
| Cone Size | 19.7 mm |
| Mounting points diameter | 10.5 mm |
| Function | Ball Joint |
| External Thread Size | M18 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Weight | 0.42 kg |
| Extra Description | ProKit |
| Height | 135 mm |
| Width | 108 mm |
| Rated Power | 27 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 40 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 2200 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Additional Information | with fastening/mounting material |
| Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023