Important compatibility info
| Length | 569 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Additional Information | with banjo fitting |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Length 1 | 1425 mm |
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Right Rear |
| Type | Cable Pull, parking brake |
Important compatibility info
| Inner diameter 1 | 56 mm |
| Inner diameter 2 | 52 mm |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Colour | Black |
| Placement on Vehicle | Rear, Left, Lower |
| Material | PE (Polyethylene) |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2004S)
Important compatibility info
| Function | Slave Cylinder, clutch |
| Diameter | 19.1 mm |
| Type | Slave Cylinder, clutch |
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length 1 | 1862 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length 2 | 1613 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 167 mm |
| Additional Information 2 | with groove |
| External Teeth, Wheel Side | 28 |
| Thread Size | M24X1,5 |
| Number of Teeth, ABS ring | 51 |
| Internal Teeth, wheel side | 36 |
| Seal Diameter | 65 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
Important compatibility info
| Seal Diameter | 56.1 mm |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 24 |
| Thread Size | M22X1,5 |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Technical Information Number | Middle groove |
| External Teeth, Wheel Side | 27 |
| Length | 150 mm |
| Additional Information 2 | with groove |
Important compatibility info
| Type | Tie Rod End |
| Cone Size | 30 mm |
| Length | 150 mm |
| Thread Measurement 1 | M24X1.5 |
| Thread Measurement 2 | M30X1.5 RHT |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Wear Warning Contact | not prepared for wear warning indicator |
| Placement on Vehicle | Front Axle |
| Thickness/Strength 1 | 17.4 mm |
| Brake System | Bosch |
| Number of threaded bolts | 2 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Height 1 | 49.4 mm |
| Width 1 | 122.6 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023









