Important compatibility info
Placement on Vehicle | Front Axle |
Length | 131.4 mm |
Width | 57.1 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17 mm |
Function | Brake Pad Set, disc brake |
Weight | 1.57 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.046 kg |
Length | 745 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.088 kg |
Height | 80 mm |
Outer diameter | 74.4 mm |
Spanner Size | 27 |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 25 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Timing Chain Size | G68VCO, G68V-1 |
Number of Chain Links | 70 |
Chain Type | Simplex, Closed chain |
Additional Information 2 | Requires special tools for mounting |
Weight | 0.306 kg |
Function | Chain, intermediate shaft |
Type | Chain, intermediate shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 9 |
Function | V-Ribbed Belt |
Length | 1920 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.294 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Weight | 0.797 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Dust Cover Kit, shock absorber |
Weight | 0.252 kg |
Placement on Vehicle | Front Axle |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (34288)
- 2x Febi Rubber Buffer, suspension (21113)
Important compatibility info
Weight | 0.320 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 128.5 mm |
Outer diameter | 91 mm |
Additional Information 2 | with seal ring |
Weight | 0.150 kg |
Tightening Torque | 25 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 114 mm |
Weight | 0.216 kg |
Type | Holder, air conditioning compressor |
Function | Holder, air conditioning compressor |
Extra Description | febi Plus |
Length | 250 mm |
Height | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 63 mm. 76 mm |
Material | Rubber/Metal, Aluminium |
Outer diameter | 66 mm |
Inner diameter | 14 mm |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Upper Front Axle, both sides |
Weight | 0.930 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Replaces | 05951 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (12577)
Important compatibility info
Length | 320 mm |
Material | Metal |
Outer diameter | 132 mm |
Inner diameter | 128 mm |
Function | Corrugated Pipe, exhaust system |
Type | Corrugated Pipe, exhaust system |
Weight | 1.138 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 159 mm |
Additional Information | with lock nut |
Spanner Size | 18 |
Paired article numbers | 196319 |
Weight | 0.781 kg |
Type | Tie Rod End |
Function | Tie Rod End |
External Thread Size | M12 x 1,75 |
Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.23 kg |
Cone Size | 22.5 mm |
Mounting points diameter | 12.2 mm |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Function | Ball Joint |
External Thread Size | M16 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.282 kg |
Placement on Vehicle | Front Axle |
Material | Rubber, Rubber with fabric lining |
Inner diameter | 18 mm |
Function | Mounting Kit, stabiliser bar |
Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (14942)
- 2x Febi Mounting, stabiliser bar (17680)
- 8x Febi Nut (08565)
- 8x Febi Washer (08567)
Important compatibility info
Weight | 0.060 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 765 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front, Rear Axle Left, Rear Axle Right |
Material | Steel |
Additional Information 2 | with bearing |
Steering arm type | Control Arm |
Weight | 0.626 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 151 mm |
Width | 130 mm |
Material | Rubber/Metal |
Outer diameter | 81 mm |
Inner diameter | 16 mm |
Placement on Vehicle | Front Axle |
Weight | 0.590 kg |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 49 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Coupling Rod |
Diameter | 1 mm |
Type | Link/Coupling Rod, stabiliser bar |
Thread Length | 28 mm |
Material | Steel |
Spanner Size | 16 |
Paired article numbers | 183943 |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Weight | 0.420 kg |
Placement on Vehicle | Rear Axle Left |
Length | 190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 255 mm |
Spanner Size | 16 |
Paired article numbers | 183942 |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Thread Length | 29 mm |
Weight | 0.415 kg |
Type | Link/Coupling Rod, stabiliser bar |
Length | 210 mm |
Placement on Vehicle | Rear Axle Right |
Material | Steel |
External Thread Size | M10 x 1,5 |
Diameter | 1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023