Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.162 kg |
| Width | 52 mm |
| Hole Spacing | 166 mm |
| Function | Stop- /Mounting Buffer |
| Length | 400 mm |
| Type | Stop- /Mounting Buffer |
| Thickness | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.14
Important compatibility info
| Weight | 0.096 kg |
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Length | 550 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1800 Ohm |
| Cable Length | 480 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.14
Important compatibility info
| Placement on Vehicle | Front Axle Right, Rear, Front Axle Left, inner |
| Material | Rubber/Metal |
| Outer diameter | 64 mm |
| Thickness | 65 mm |
| Inner diameter | 14.3 mm |
| Paired article numbers | 180567 |
| Weight | 0.270 kg |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.14
Important compatibility info
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.59 kg |
| Placement on Vehicle | Rear Axle |
| Type | Suspension Strut Support Mount |
| Length | 130 mm |
| Height | 47 mm |
| Width | 120 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.773 kg |
| Length | 159 mm |
| Width | 137 mm |
| Material | Rubber/Metal |
| Outer diameter | 90 mm |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 48 mm |
| Additional Information 2 | without ball bearing |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.339 kg |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.646 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 224 mm |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information 2 | with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (22620)
- 1x Febi Bellow, steering (34129)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (23842)
£20.15
Important compatibility info
| Eject Force | 500 N |
| Housing length | 312 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.28 kg |
| Housing Diameter | 18 mm |
| Length | 585 mm |
| Placement on Vehicle | both sides |
| Stroke | 246 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Height | 103 mm |
| Outer diameter | 95 mm |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Weight | 0.133 kg |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
| Type | Cap, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Upper |
| Function | Ball Joint |
| Type | Ball Joint |
| Weight | 0.550 kg |
| Extra Description | ProKit |
| Steering arm type | for control arm |
| External Thread Size | M14 x 1,5 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Material | ACM (Polyacrylate) |
| Length | 453 mm |
| Width | 250 mm |
| Weight | 0.155 kg |
| Thickness | 2.4 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.134 kg |
| Number of Connectors / Ports | 2 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, headlight cleaning |
| Additional Information 2 | with seal ring |
| Type | Washer Fluid Pump, headlight cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.365 kg |
| Placement on Vehicle | Lower Front Axle, Rear |
| Length | 50 mm |
| Material | Rubber/Metal |
| Outer diameter | 57.5 mm |
| Inner diameter | 12.5 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.032 kg |
| Material | ACM (Polyacrylate) |
| Function | Gasket, timing case cover |
| Type | Gasket, timing case cover |
| for OE number | 06H 103 483 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Material | Plastic |
| Additional Information 2 | without lid |
| Weight | 0.6401 kg |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| for OE number | 8A0 121 403 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.028 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 265 mm |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.282 kg |
| Length | 475 mm |
| Housing Diameter | 19 mm |
| Eject Force | 625 N |
| Stroke | 169 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 245.5 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Length | 47.2 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.030 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.030 kg |
| Placement on Vehicle | Upper |
| Material | Rubber, Plastic |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 80 mm |
| Function | Bushing, axle beam |
| Weight | 0.52 kg |
| Type | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023