Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 330 mm |
| Outer diameter | 140 mm |
| Weight | 1.59 kg |
| Type | Suspension Spring |
| Number of Coils | 5.3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.13
Important compatibility info
| Type | Ball Joint |
| Weight | 1.08 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
| Steering arm type | for control arm |
| Cone Size | 27 mm |
| External Thread Size | M20 x 1,5 |
| Function | Ball Joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.13
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.260 kg |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (186112)
- 2x Febi Protective Cap/Bellow, shock absorber (109362)
£20.13
Important compatibility info
| Weight | 1.424 kg |
| Length | 145 mm |
| Outer diameter | 62 mm |
| Thread Type | with right-hand thread |
| Cone Size | 27 mm |
| Function | Angled Ball Joint, steering push rod |
| External Thread Size | M20 x 1,5, M28 x 1,5 |
| Type | Angled Ball Joint, steering push rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.13
Important compatibility info
| Weight | 0.250 kg |
| Additional Information 2 | with seal ring |
| Height | 250 mm |
| Outer diameter | 103 mm |
| Inner diameter | 46 mm. 19 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.13
Important compatibility info
| Inner diameter | 75 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Weight | 0.519 kg |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.13
Important compatibility info
| Width | 45 mm |
| Material | Plastic |
| Outer diameter | 76.2 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 31 mm |
| Weight | 0.199 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.13
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.300 kg |
| Type | Mounting, engine |
| Placement on Vehicle | Right, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.13
Important compatibility info
| Weight | 2.162 kg |
| Width | 52 mm |
| Hole Spacing | 166 mm |
| Function | Stop- /Mounting Buffer |
| Length | 400 mm |
| Type | Stop- /Mounting Buffer |
| Thickness | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.14
Important compatibility info
| Placement on Vehicle | Front Axle Right, Rear, Front Axle Left, inner |
| Material | Rubber/Metal |
| Outer diameter | 64 mm |
| Thickness | 65 mm |
| Inner diameter | 14.3 mm |
| Paired article numbers | 180567 |
| Weight | 0.270 kg |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Upper |
| Function | Ball Joint |
| Type | Ball Joint |
| Weight | 0.550 kg |
| Extra Description | ProKit |
| Steering arm type | for control arm |
| External Thread Size | M14 x 1,5 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.075 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2. 4 |
| Cable Length | 504 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket Set, cylinder head cover |
| Weight | 0.054 kg |
| for OE number | 11 12 7 807 017 |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.017 kg |
| Length | 23.9 mm |
| Number of Connectors / Ports | 3 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided |
| Weight | 0.400 kg |
| Length | 127 mm |
| Material | Thermoplast |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 74 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100191)
- 1x Febi Clamping Clip (29816)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Axle Bolt, drive shaft (40617)
£20.15
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.55 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 59 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 130 mm |
| Additional Information 2 | without ball bearing |
| Inner diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.134 kg |
| Number of Connectors / Ports | 2 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, headlight cleaning |
| Additional Information 2 | with seal ring |
| Type | Washer Fluid Pump, headlight cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Mounting points diameter | 18 mm |
| Housing length | 364.5 mm |
| Function | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Stroke | 303 mm |
| Eject Force | 230 N |
| Housing Diameter | 18 mm |
| Length | 685 mm |
| Placement on Vehicle | both sides |
| Weight | 0.394 kg |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.101 kg |
| Material | Plastic |
| Function | Housing Cover, crankcase |
| Extra Description | febi Plus |
| Type | Housing Cover, crankcase |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Eject Force | 500 N |
| Housing length | 312 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.28 kg |
| Housing Diameter | 18 mm |
| Length | 585 mm |
| Placement on Vehicle | both sides |
| Stroke | 246 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023