Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Upper |
| Paired article numbers | 171327 |
| Weight | 0.222 kg |
| Type | Holder, engine mounting system |
| Function | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.32
Important compatibility info
| Outer diameter | 114 mm |
| Inner diameter | 12 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Weight | 0.55 kg |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 56 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.32
Important compatibility info
| Weight | 0.21 kg |
| Length | 416 mm |
| Housing Diameter | 18 mm |
| Eject Force | 405 N |
| Stroke | 152 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 242 mm |
| Type | Gas Spring, boot/cargo area |
| Placement on Vehicle | Left Rear, Right Rear |
| Mounting points diameter | 16.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.32
Important compatibility info
| Weight | 0.175 kg |
| Housing Diameter | 18 mm |
| Eject Force | 280 N |
| Stroke | 107 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Length | 377 mm |
| Function | Gas Spring, bonnet |
| Housing length | 210.5 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.33
Important compatibility info
| Weight | 0.7 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M20 x 1,5, M18 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.33
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 1.16 kg |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.2 mm |
| Inspection Tag | ECE R90 Approved |
| Width | 40 mm. 42 mm |
| Length | 140 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip, with anti-squeak plate |
| Model | CLIO FORFOUR FORTWO LOGAN SANDERO TWINGO |
| Manufacturer | DACIA RENAULT SMART |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.33
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.6 mm |
| Width | 47.2 mm |
| Length | 106.3 mm |
| Wear Warning Contact | with acoustic wear warning |
| Weight | 1.2 kg |
| Placement on Vehicle | Rear Axle |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.33
Important compatibility info
| Weight | 0.310 kg |
| Placement on Vehicle | both sides |
| Length | 525 mm |
| Housing length | 291.5 mm |
| Mounting points diameter | 18 mm |
| Housing Diameter | 19 mm |
| Piston conrod diameter | 8 mm |
| Eject Force | 310 N |
| Function | Gas Spring, boot/cargo area |
| Stroke | 205 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.33
Important compatibility info
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Width | 82 mm |
| Length | 157 mm |
| Material | Rubber/Metal |
| Weight | 1.390 kg |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.33
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 157 mm |
| Width | 74 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.224 kg |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (108928)
- 2x Febi Rubber Buffer, suspension (103965)
£20.33
Important compatibility info
| Function | Joint Kit, drive shaft |
| Seal Diameter | 72 mm |
| Internal Teeth, wheel side | 30 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 105 mm |
| Outer diameter | 90 mm |
| External Teeth, Wheel Side | 36 |
| External Thread Size | M16 x 1,5 |
| Type | Joint Kit, drive shaft |
| Weight | 2.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.33
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Mounting points diameter | 11.1 mm |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 21 mm |
| Weight | 0.450 kg |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (24852)
- 3x Febi Screw (24362)
- 3x Febi Nut (24361)
£20.34
Important compatibility info
| Weight | 0.260 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Rubber with fabric lining |
| Outer diameter | 24 mm |
| Inner diameter | 17 mm |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.34
Important compatibility info
| Weight | 0.631 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 3C0 199 855 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.34
Important compatibility info
| Weight | 0.02 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
| Additional Information | with pressure plate |
| Housing Colour | black/white |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.34
Important compatibility info
| Function | Bushing, axle beam |
| Weight | 0.130 kg |
| Material | Rubber/Metal |
| Thickness | 54 mm |
| for OE number | 51939762 |
| Type | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.35
Important compatibility info
| Weight | 0.418 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.35
Important compatibility info
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Cast Iron |
| Weight | 0.280 kg |
| Piston Diameter | 17.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.35
Important compatibility info
| Weight | 0.033 kg |
| Material | PA (polyamide) |
| Inner diameter | 19 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.35
Important compatibility info
| Weight | 0.91 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 210 mm |
| Paired article numbers | 170771 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.36
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023