Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.92 kg |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Additional Information | with grease |
| Additional Information 2 | with clamps |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 63 mm |
| Inner diameter 1 | 25 mm |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Split Sleeve (08461)
- 1x Febi Split Sleeve (08462)
- 1x Febi Seal Ring (08463)
- 1x Febi Seal Ring (08464)
- 1x Febi Molybdenum Grease (08414)
£21.14
Important compatibility info
| Weight | 0.177 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| Replaces | 10508 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Paired article numbers | 12028 |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 1.6 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Length | 2000 mm |
| Weight | 0.582 kg |
| Function | Speedometer Cable |
| Driver Position | for right-hand drive vehicles |
| Type | Speedometer Cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.460 kg |
| External Thread Size | M14 x 1,5, M14 x 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 323 mm |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (12835)
- 1x Febi Bellow, steering (03308)
- 1x Febi Fastening Clamp (03326)
- 1x Febi Fastening Clamp (03327)
£21.14
Important compatibility info
| Weight | 1.73 kg |
| Placement on Vehicle | Front Axle |
| Length | 131.6 mm |
| Width | 59.9 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.9 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.391 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 253 mm |
| Outer diameter | 104 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 11 mm |
| Weight | 1.25 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| Internal Teeth, wheel side | 23 |
| Weight | 1.934 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 1.126 kg |
| Length | 200 mm |
| Width | 150 mm |
| Material | Rubber/Metal |
| Outer diameter | 77 mm. 87 mm |
| Inner diameter | 12 mm |
| Paired article numbers | 12069 |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 74 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.013 kg |
| for OE number | 98 000 384 80 |
| Type | Sensor, wheel speed |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Length | 1936 mm |
| Weight | 0.240 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.403 kg |
| Width of castor bearing surface | 27 mm |
| Placement on Vehicle | Centre |
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.01 kg |
| Type | Sensor, exterior temperature |
| Function | Sensor, exterior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.67 kg |
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 3C0 199 855 M |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Inner diameter | 32 mm |
| Thickness | 160 mm |
| Weight | 0.37 kg |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.09 kg |
| Function | Exhaust Valve |
| Valve head diameter | 39 mm |
| Valve stem diameter | 9 mm |
| Length | 115.8 mm |
| Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.134 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1650 Ohm |
| Cable Length | 1355 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.61 kg |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Inner diameter | 42 mm |
| Outer diameter | 75 mm |
| Width | 37 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Inner diameter 2 | 90 mm |
| Function | Intake Hose, air filter |
| Inner diameter 1 | 77 mm |
| Material | NBR (nitrile butadiene rubber) |
| Weight | 0.222 kg |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023