Important compatibility info
| Width | 45 mm |
| Inner diameter | 12 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Length | 107 mm |
| Type | Mounting, engine |
| Placement on Vehicle | Left, transmission sided |
Important compatibility info
| Function | Wiper Blade |
| Length | 19 Inch |
| Quantity | 10 |
| Number of adapters | 9 |
| Wiper blade type | Flat wiper blade |
| Length | 480 mm |
| Type | Wiper Blade |
Important compatibility info
| Length | 435 mm |
| Function | Brake Hose |
| Thread Measurement 1 | 3 of M10x1 |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Thread Measurement 2 | M12x1 |
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Rear Axle |
| Thickness/Strength 1 | 20.5 mm |
| Brake System | Brembo |
| Number of pads | 4 |
| Number of threaded bolts | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Homologated |
| Height 1 | 72.7 mm |
| Width 1 | 141.2 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | FCA7369 |
Important compatibility info
| Placement on Vehicle | Right, Lower, Front |
| Colour | Black |
| Inner diameter 2 | 25 mm |
| Inner diameter 1 | 48 mm |
| Material | Silicone |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1001S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1100S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
| Inner diameter 2 | 39 mm |
| Colour | Black |
| Inner diameter 1 | 39 mm |
| Function | Charge Air Hose |
| Material | PE (Polyethylene) |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1105S)
Important compatibility info
| Seal Diameter | 35 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 25 |
| External Teeth, Diff.Side | 22 |
| Length | 140 mm |
Important compatibility info
| Height | 100 mm |
| Diameter | 91 mm |
| Filter type | In-Line Filter, with filter heating |
| Inlet Diameter | 8 mm |
| Outlet Diameter | 10 mm |
| Type | Fuel Filter |
| Function | Fuel Filter |
Important compatibility info
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Function | Brake Disc |
| Centering Diameter | 62 mm |
| Minimum thickness | 8 mm |
| Outer diameter | 228 mm |
| Placement on Vehicle | Rear Axle |
| Number of Holes | 4 |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
| Height | 34.2 mm |
| Brake Disc Thickness | 9 mm |
| Quantity Unit | Set |
| Number of mounting bores | 2 |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Thermostat, coolant |
| Housing Type | with housing |
| Opening Temperature | 87 °C |
| Type | Thermostat, coolant |
Important compatibility info
| Thread Measurement 2 | M30X1.5 |
| Length | 85 mm |
| Thread Measurement 1 | N26X1.5 |
| Cone Size | 38 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
Important compatibility info
Important compatibility info
| Type | Master Cylinder, clutch |
| Material | Plastic |
| Inner diameter | 15.87 mm |
| Function | Master Cylinder, clutch |
Important compatibility info
| Water Pump Pulley Diameter | 50 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Impeller Diameter | 70 mm |
| Height | 141 mm |
| Type | Water Pump, engine cooling |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Type | with internal thread |
| Function | Brake Hose |
| Length 2 | 233 mm |
| Length 1 | 303 mm |
| Additional Information | with banjo fitting |
| Type | Brake Hose |
| Additional Information 2 | with banjo bolt |
| Thread Size | M10x1 |
| Mounting Bolt Thread Size | M10x1 |
Important compatibility info
| Function | Brake Hose |
| Length 2 | 234 mm |
| Length 1 | 304 mm |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with banjo fitting |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Additional Information 2 | with banjo bolt |
| Thread Size | M10x1 |
| Mounting Bolt Thread Size | M10x1 |
Important compatibility info
| Distance of fastening bolts | 110 mm |
| Inner diameter | 12 mm |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | with bearing |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5436 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | with bearing |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5435 |
Important compatibility info
| Function | Master Cylinder, clutch |
| Inner diameter | 19.05 mm |
| Type | Master Cylinder, clutch |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7132 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5676)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7570)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7569)
Important compatibility info
| Bearing Code | Gen 3 |
| Additional Information 2 | with integrated ABS sensor |
| Inner diameter 1 | 27 mm |
| Outer diameter 1 | 137 mm |
| Only in connection with | BHN201, FHN201 |
| Width 1 | 70 mm |
| Tightening Torque | 182 Nm |
| Wheel Bolt Bore Diameter | 12 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
| Thread Size | M12 |
| Type | Wheel Bearing Kit |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7131 |
| Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5676)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7570)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7569)
Important compatibility info
| Paired article numbers | FCA7844 |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Height | 60 mm |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Outer diameter | 262 mm |
| Minimum thickness | 8 mm |
| Centering Diameter | 80 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Brake Disc Thickness | 10 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Height | 133 mm |
| Material | Aluminium |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Length | 188 mm |
| Type | Mounting, engine |
| Placement on Vehicle | Right Front |
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Inner diameter 1 | 28 mm |
| Outer diameter 1 | 137 mm |
| Number of mounting bores | 4 |
| Only in connection with | BHN221, FHN221 |
| Width 1 | 85 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 3 |
Important compatibility info
| Opening Temperature | 83 °C |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with sensor |
| Housing Type | with housing |
| Housing material | Plastic |
| Function | Thermostat, coolant |
| Replaces | BTS626.83 |
| Type | Thermostat, coolant |
Important compatibility info
| Length | 168 mm |
| Inner diameter | 14 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Material | Aluminium |
| Paired article numbers | FSK8017 |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 155 mm |
| Thread Size | M22X1,5 |
| External Teeth, Wheel Side | 27 |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 33 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























