Important compatibility info
Weight | 0.073 kg |
Placement on Vehicle | Rear |
Length | 2715 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 99.6 mm |
Width | 42.2 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.2 mm |
Wear Warning Contact | with acoustic wear warning |
Weight | 0.945 kg |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.517 kg |
Height | 162 mm |
Outer diameter | 99 mm |
Filter type | In-Line Filter, without filter heating, with water drain screw |
Seal Diameter | 28.5 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.743 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Rod/Strut | Push Rod |
Placement on Vehicle | Rear Axle Right, Rear Axle Left, Rear, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Replaces | 10092; 10093 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Weight | 0.424 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 130.8 mm |
Width | 44.4 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15 mm |
Function | Brake Pad Set, disc brake |
Weight | 1.04 kg |
Type | Brake Pad Set, disc brake |
Replaces | 16794 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.44 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Inner diameter | 10 mm |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 68 mm |
Width | 73 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 19.5 mm |
Housing length | 302.5 mm |
Weight | 0.333 kg |
Placement on Vehicle | both sides |
Length | 484 mm |
Housing Diameter | 20 mm |
Eject Force | 750 N |
Stroke | 335 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.802 kg |
Inner diameter | 14 mm |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
for OE number | 171 412 329 A S1 |
Type | Suspension Strut Support Mount |
Additional Information 2 | with ball bearing |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (07359)
- 1x Febi Spacer Sleeve, suspension strut support mount (08431)
Important compatibility info
Inner diameter | 112 mm |
Thickness | 35 mm |
Function | Ring, wheel hub |
Type | Ring, wheel hub |
Outer diameter | 213 mm |
Material | Steel |
Weight | 2.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with anti-squeak plate, with fastening material |
Placement on Vehicle | Rear Axle |
Length | 99.8 mm |
Width | 41.1 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.9 mm |
Function | Brake Pad Set, disc brake |
Weight | 0.83 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 91 mm |
Weight | 0.215 kg |
Joint Type | CV Joint |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 28 mm |
Length | 128 mm |
Placement on Vehicle | Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180187)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Thickness/Strength 1 | 16 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | with acoustic wear warning |
Width | 53 mm |
Length | 149 mm |
Weight | 1.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.450 kg |
Placement on Vehicle | Front Axle |
Length | 129.8 mm |
Width | 72.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Replaces | 16468 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Weight | 0.177 kg |
Paired article numbers | 175303 |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.995 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 08054 |
Function | Tie Rod |
External Thread Size | M12 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod |
Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (33908)
- 1x Febi Tie Rod End (02238)
Important compatibility info
Weight | 1.17 kg |
Placement on Vehicle | Right Rear |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Weight | 0.3 kg |
for OE number | 5033.42 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (36308)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Height | 60 mm |
Material | Plastic |
Outer diameter | 113 mm |
Inner diameter | 38 mm |
Inner diameter 1 | 61 mm |
Outer diameter 2 | 104 mm |
Type | Rolling Bearing, suspension strut support mount |
Function | Rolling Bearing, suspension strut support mount |
Weight | 0.240 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | at gearshift linkage |
Weight | 0.030 kg |
Function | Repair Kit, gear shift lever |
Type | Repair Kit, gear shift lever |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023