Important compatibility info
| Length | 119 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Width | 54 mm |
| Height | 47 mm |
| Inner diameter | 12 mm |
| Type | Mounting, engine |
Important compatibility info
| Inner diameter 1 | 57 mm |
| Inner diameter 2 | 55 mm |
| Colour | Black |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Material | AEM (Ethylene Acrylate Rubber) |
| Placement on Vehicle | Left, Lower, Front |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2005S)
Important compatibility info
| Wear Warning Contact | with integrated wear warning contact |
| Inspection Tag | ECE R90 Homologated |
| Brake System | Brembo |
| Width 1 | 169 mm |
| Warning Contact Length | 155 mm |
| Thickness/Strength 1 | 19.6 mm |
| Number of pads | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Height 1 | 61.5 mm |
| Number of threaded bolts | 2 |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Bearing Code | Gen 2 |
| Inner diameter 1 | 30 mm |
| Outer diameter 1 | 117 mm |
| Width 1 | 61 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Additional Information | with gaskets/seals |
| Number of Teeth | 23 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Replaces | BWP1763 |
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Thermostat, coolant |
| Opening Temperature | 82 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Additional Information | with gaskets/seals |
Important compatibility info
| Seal Diameter | 56 mm |
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Internal Teeth, wheel side | 25 |
| Function | Joint Kit, drive shaft |
| Technical Information Number | Middle groove |
| Thread Size | M22X1,5 |
| Length | 165 mm |
| Additional Information 2 | with groove |
| Type | Joint Kit, drive shaft |
Important compatibility info
| Inner diameter | 16 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Distance of fastening bolts | 128 mm |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5324 |
Important compatibility info
| Function | Central Slave Cylinder, clutch |
| Base body material | Plastic |
| Type | Central Slave Cylinder, clutch |
Important compatibility info
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6836 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5627)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7054)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7689)
Important compatibility info
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| for centre hole diameter of | 30 mm |
| Replaces | BPB1073 |
Important compatibility info
| Housing material | Plastic |
| Housing Type | with housing |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Opening Temperature | 82 °C |
| Additional Information | with gaskets/seals |
Important compatibility info
| Rotor Style | Solid |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 4 |
| Outer diameter | 234 mm |
| Brake Disc Thickness | 7 mm |
| Height | 40 mm |
| Minimum thickness | 6 mm |
| Centering Diameter | 68 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Centering Diameter | 65 mm |
| Minimum thickness | 8 mm |
| Outer diameter | 253 mm |
| Placement on Vehicle | Rear Axle |
| Function | Brake Disc |
| Brake Disc Thickness | 10 mm |
| Height | 61.2 mm |
| Number of Holes | 9 |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Quantity Unit | Set |
| Number of mounting bores | 1 |
Important compatibility info
| Function | Radiator Hose |
| Type | Radiator Hose |
Important compatibility info
| Inner diameter 2 | 45 mm |
| Colour | Black |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Material | Polychloroprene (Neoprene) |
| Inner diameter 1 | 45 mm |
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Front |
Important compatibility info
| Thread Size | M22X1,5 |
| Technical Information Number | Middle groove |
| Length | 143 mm |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 21 |
| Additional Information 2 | with groove |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 53.2 mm |
| External Teeth, Wheel Side | 25 |
Important compatibility info
| Rotor Style | Solid |
| Number of Holes | 5 |
| Surface | Coated |
| Outer diameter | 286 mm |
| Brake Disc Thickness | 12 mm |
| Height | 51.7 mm |
| Minimum thickness | 10.4 mm |
| Centering Diameter | 79 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
Important compatibility info
| Function | Thermostat, coolant |
| Housing material | Plastic |
| Housing Type | with housing |
| Additional Information | with gaskets/seals |
| Opening Temperature | 91 °C |
| Type | Thermostat, coolant |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Outer diameter | 290 mm |
| Minimum thickness | 10 mm |
| Centering Diameter | 71.1 mm |
| Brake Disc Thickness | 12 mm |
| Height | 35 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Wear Warning Contact | with acoustic wear warning |
| Thickness/Strength 1 | 18.2 mm |
| Inspection Tag | ECE R90 Homologated |
| Brake System | Bosch |
| Number of wear indicators | 4 Per Axle |
| Number of pads | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Height 1 | 56.4 mm |
| Width 1 | 150.4 mm |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Surface | Coated |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Outer diameter | 260 mm |
| Inspection Tag | ECE R90 Homologated |
| Brake Disc Thickness | 22 mm |
| Height | 40.5 mm |
| Minimum thickness | 19.4 mm |
| Centering Diameter | 67 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | with integrated wear warning contact |
| Height 1 | 67 mm |
| Thickness/Strength 1 | 19.9 mm |
| Brake System | Brembo |
| Warning Contact Length | 168 mm |
| Number of threaded bolts | 4 |
| Function | Brake Pad Set, disc brake |
| Number of pads | 4 |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Homologated |
| Width 1 | 163.2 mm |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Wear Warning Contact | with acoustic wear warning |
| Thickness/Strength 1 | 17.7 mm |
| Brake System | Kelsey Hayes |
| Number of wear indicators | 2 Per Axle |
| Number of pads | 4 |
| Number of Springs | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Height 1 | 53.4 mm |
| Height 2 | 49.4 mm |
| Width 1 | 142.5 mm |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 259 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 67 mm |
| Minimum thickness | 8.0 mm |
| Brake Disc Thickness | 10 mm |
| Height | 51 mm |
| Number of Holes | 5 |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Function | Oil sump |
| Material | Aluminium |
| Additional Information 2 | without bore for oil level sensor |
| Type | Oil sump |
| Number of mounting bores | 20 |
Important compatibility info
| Type | Master Cylinder, clutch |
| Material | Plastic |
| Inner diameter | 19.05 mm |
| Function | Master Cylinder, clutch |
Important compatibility info
| Additional Information 2 | with groove |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 30 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Seal Diameter | 70.2 mm |
| Length | 156 mm |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 37 |
| Thread Size | M24X1,5 |
Important compatibility info
| Internal Teeth, wheel side | 30 |
| External Teeth, Wheel Side | 25 |
| Length | 156 mm |
| Seal Diameter | 50 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Additional Information 2 | with groove |
| Number of Teeth, ABS ring | 44 |
| Technical Information Number | Middle groove |
| Thread Size | M22X1,5 |
Important compatibility info
| Length 1 | 1630 mm |
| Length 2 | 1562 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Rear |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper, Rear |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7493 |
Important compatibility info
| Material | Silicone |
| Inner diameter 1 | 35 mm |
| Colour | Black |
| Inner diameter 2 | 35 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1103S)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rotor Style | Vented |
| Number of Holes | 4 |
| Outer diameter | 256 mm |
| Brake Disc Thickness | 24 mm |
| Height | 45.2 mm |
| Minimum thickness | 21.4 mm |
| Centering Diameter | 69 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6204 |
Important compatibility info
| Function | Thermostat, coolant |
| Housing material | Aluminium |
| Opening Temperature | 102 °C |
| Additional Information 2 | with sensor |
| Type | Thermostat, coolant |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
Important compatibility info
| Outer diameter | 131 mm |
| Inner diameter | 48 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Outer diameter | 268 mm |
| Centering Diameter | 71.1 mm |
| Quantity Unit | Set |
| Brake Disc Thickness | 12 mm |
| Height | 35 mm |
| Minimum thickness | 10 mm |
| Function | Brake Disc |
| Number of Holes | 5 |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Number of mounting bores | 2 |
Important compatibility info
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle, Left, Right |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6105 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Cone Size | 38 mm |
| Thread Type | with right-hand thread |
| Thread Measurement 2 | M30X1.5 |
| Thread Measurement 1 | M38x1.5 RHT |
| Length | 135 mm |
Important compatibility info
| Length 1 | 2630 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Right Rear |
Important compatibility info
| Number of pads | 4 |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Homologated |
| Thickness/Strength 1 | 18.7 mm |
| Width 1 | 121.9 mm |
| Height 1 | 117.5 mm |
| Brake System | Brembo |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Important compatibility info
| Inner diameter 2 | 52 mm |
| Colour | Black |
| Inner diameter 1 | 52 mm |
| Material | ACM (Polyacrylate) |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2002S)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Bearing Code | Gen 2 |
| Inner diameter 1 | 32 mm |
| Outer diameter 1 | 128 mm |
| Width 1 | 70 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Important compatibility info
| Additional Information 2 | with groove |
| Seal Diameter | 52 mm |
| External Teeth, Wheel Side | 27 |
| Type | Joint Kit, drive shaft |
| Length | 131 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
| Thread Size | M22X1,5 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 3 |
| Number of Holes | 4 |
| Outer diameter | 290 mm |
| Rotor Style | Solid |
| Brake Disc Thickness | 10 mm |
| Height | 60 mm |
| Minimum thickness | 8 mm |
| Centering Diameter | 71 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Additional Information 2 | with bearing |
| Additional Information | without spring seat |
| Function | Suspension Strut Support Mount |
| Distance of fastening bolts | 130 mm |
| Inner diameter | 14 mm |
| Type | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Paired article numbers | FSM5567 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































