Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 18 |
| Hub Profile | 20.8 x 18.3 |
| Outer diameter | 180 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6420 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6516)
Important compatibility info
| Bearing Code | Gen 0 |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
Important compatibility info
| Impeller Diameter | 79 mm |
| Number of Wings | 5 |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 74 mm |
Important compatibility info
| Material | Plastic |
| Additional Information 2 | without sensor |
| Inner diameter 1 | 65 mm |
| Colour | black |
| Inner diameter 2 | 56 mm |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
Important compatibility info
| Material | Plastic |
| Additional Information 2 | without sensor |
| Inner diameter 1 | 65 mm |
| Colour | black |
| Inner diameter 2 | 56 mm |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
Important compatibility info
| Material | Polychloroprene (Neoprene) |
| Inner diameter 2 | 57 mm |
| Colour | Black |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Inner diameter 1 | 65 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1110S)
Important compatibility info
| Bearing Code | Gen 2 |
| Inner diameter 1 | 25 mm |
| Outer diameter 1 | 129 mm |
| Width 1 | 64 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Number of Wings | 6 |
| Impeller Diameter | 80 mm |
| Function | Water Pump, engine cooling |
| Number of Teeth | 20 |
| Water Pump Type | for timing belt drive |
| Water Pump Pulley Diameter | 59 mm |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Important compatibility info
| Pipe Diameter | 26 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Thread Size | M20X1.5 |
| Length | 160 mm |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Function | Brake Drum |
| Overall Height | 114 mm |
| Inner Brake Drum Height | 72 mm |
| Br. Drum outer diameter | 322 mm |
| Inner Brake Drum Diameter | 280 mm |
| Type | Brake Drum |
| Number of Holes | 5 |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Number of Parts | 2 -part |
| Hub Profile | 24 x 21.1 |
| Outer diameter | 226 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 21 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Rotor Style | Solid |
| Outer diameter | 295 mm |
| Brake Disc Thickness | 9.6 mm |
| Height | 72.3 mm |
| Minimum thickness | 8.4 mm |
| Centering Diameter | 68 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Outer diameter | 290 mm |
| Brake Disc Thickness | 12.6 mm |
| Height | 61.5 mm |
| Minimum thickness | 11.7 mm |
| Centering Diameter | 101.6 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Replaces | BBD4018 |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 5 |
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Length | 22 mm |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6796 |
Important compatibility info
| Length 1 | 1550 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Right Rear |
Important compatibility info
| Length 2 | 713 mm |
| Length 1 | 885 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Placement on Vehicle | Left, Right, Rear |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Important compatibility info
| Placement on Vehicle | Right Rear |
| Length 1 | 2095 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
| Length 2 | 1874 mm |
Important compatibility info
| Length 1 | 1570 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
| Length 2 | 1353 mm |
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Upper, Rear |
Important compatibility info
| Additional Information 2 | with groove |
| Length | 150 mm |
| Thread Size | M22X1.5 |
| External Teeth, Wheel Side | 26 |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 61.2 mm |
| Internal Teeth, wheel side | 23 |
| Function | Joint Kit, drive shaft |
Important compatibility info
| Function | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 23 |
| Length | 185 mm |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 35 mm |
| External Teeth, Diff.Side | 20 |
| Placement on Vehicle | Front Axle Right, transmission sided |
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Seal Diameter | 61 mm |
| Thread Size | M22X1.5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 167 mm |
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| Function | Joint Kit, drive shaft |
| Additional Information 2 | with groove |
| Internal Teeth, wheel side | 26 |
Important compatibility info
| Seal Diameter | 56.5 mm |
| Length | 165 mm |
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 27 |
| Placement on Vehicle | Front Axle Right, Wheel Side |
| Internal Teeth, wheel side | 37 |
| Type | Joint Kit, drive shaft |
| Thread Size | M22X1,5 |
| Additional Information 2 | with groove |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with ABS sensor ring |
| Outer diameter 1 | 140 mm |
| Width 1 | 53 mm |
| Outer diameter 2 | 94 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Code | Gen 2 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA5651 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5434)
- 1x Borg & Beck Ball Joint (BBJ5204)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA5650 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5434)
- 1x Borg & Beck Ball Joint (BBJ5204)
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Height | 78 mm |
| Type | Mounting, engine |
| Placement on Vehicle | Upper Left |
| Inner diameter | 12 mm |
| Length | 160 mm |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6766 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6765 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Replaces | BCA7453 |
| Type | Control/Trailing Arm, wheel suspension |
| Diameter | 15 mm |
| Paired article numbers | FCA7110 |
| Placement on Vehicle | Front Axle Right, Lower |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5684)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6137)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6454)
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 282 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 60.9 mm |
| Minimum thickness | 21.4 mm |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Height | 32.4 mm |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 22.8 mm |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
Important compatibility info
| Surface | Coated |
| Outer diameter | 280 mm |
| Rotor Style | Vented |
| Number of Holes | 6 |
| Brake Disc Thickness | 25 mm |
| Height | 43 mm |
| Minimum thickness | 22 mm |
| Centering Diameter | 60 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Inspection Tag | ECE R90 Homologated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| External Teeth, Diff.Side | 29 |
| Int. teeth, diff.side, conn.to transm. | 27 |
| Seal Diameter | 44 mm |
| Type | Joint Kit, drive shaft |
| Length | 201 mm |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, transmission sided |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Outer diameter | 256 mm |
| Brake Disc Thickness | 22 mm |
| Height | 36.3 mm |
| Minimum thickness | 20 mm |
| Centering Diameter | 65 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Placement on Vehicle | Rear Axle |
| Surface | Coated |
| Number of Holes | 5 |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Length | 24 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6144 |
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Diameter | 12 mm |
| Length | 324 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Paired article numbers | FCA5556 |
| Placement on Vehicle | Front Axle Left, Lower |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6516)
Important compatibility info
| Material | Aluminium |
| Function | Central Slave Cylinder, clutch |
| Type | Central Slave Cylinder, clutch |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Number of Teeth | 18 |
| Hub Profile | 21 x 18.2 |
| Outer diameter | 180 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Parts | 3 -part |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Outer diameter | 257 mm |
| Brake Disc Thickness | 26 mm |
| Height | 52 mm |
| Minimum thickness | 24 mm |
| Centering Diameter | 68 mm |
| Function | Brake Disc |
| Surface | Coated |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Version | With fittings(ex.KP) |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6688 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5550)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6994)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6995)
- 1x Borg & Beck Fastening Bolt, control arm (BSK8039)
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 276 mm |
| Surface | Coated |
| Brake Disc Thickness | 22 mm |
| Height | 77 mm |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Minimum thickness | 19 mm |
| Centering Diameter | 85 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Replaces | BBD5081 |
| Number of mounting bores | 2 |
Important compatibility info
| Surface | Coated |
| Brake Disc Thickness | 16 mm |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Outer diameter | 272 mm |
| Height | 96.5 mm |
| Minimum thickness | 14 mm |
| Centering Diameter | 85 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Replaces | BBD4370 |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 2 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 7 |
| Outer diameter | 289 mm |
| Rotor Style | Vented |
| Brake Disc Thickness | 25 mm |
| Height | 42 mm |
| Minimum thickness | 22 mm |
| Centering Diameter | 70 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































