Important compatibility info
Important compatibility info
| Function | Water Pump, engine cooling |
| Impeller Diameter | 60 mm |
| Additional Information | with gaskets/seals |
| Water Pump Pulley Diameter | 65 mm |
| Type | Water Pump, engine cooling |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Additional Information 2 | with groove |
| Number of Teeth, ABS ring | 48 |
| Internal Teeth, wheel side | 21 |
| Length | 150 mm |
| Seal Diameter | 52.5 mm |
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 25 |
| Type | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Technical Information Number | Middle groove |
| Thread Size | M22X1,5 |
Important compatibility info
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
| Base body material | Aluminium |
Important compatibility info
| Placement on Vehicle | Right Front |
| Height | 77 mm |
| Inner diameter | 16 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Length | 160 mm |
| Type | Mounting, engine |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Number of Holes | 5 |
| Outer diameter | 286 mm |
| Brake Disc Thickness | 17 mm |
| Height | 29 mm |
| Rotor Style | Vented |
| Minimum thickness | 15 mm |
| Centering Diameter | 108.3 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 312 mm |
| Brake Disc Thickness | 28 mm |
| Height | 52.5 mm |
| Minimum thickness | 26.4 mm |
| Centering Diameter | 79 mm |
| Function | Brake Disc |
| Rotor Style | Vented |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Rear Axle Left |
| Number of mounting bores | 1 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Wear Warning Contact | prepared for wear warning indicator |
| Height 2 | 79 mm |
| Width 1 | 193 mm |
| Thickness/Strength 1 | 20.4 mm |
| Thickness/Strength 2 | 19.4 mm |
| Brake System | Ate - Teves |
| Number of pads | 4 |
| Number of Springs | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Height 1 | 79.3 mm |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Number of Flange Connections | 1 |
| Type | Coolant Flange |
| Additional Information 2 | with sensor |
| Function | Coolant Flange |
Important compatibility info
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Number of Holes | 4 |
| Outer diameter | 281 mm |
| Brake Disc Thickness | 24 mm |
| Height | 45.5 mm |
| Minimum thickness | 22 mm |
| Centering Diameter | 69 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Opening Temperature | 87 °C |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
| Housing material | Plastic |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6102 |
| Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5414)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6110)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6111)
Important compatibility info
| Int. teeth, diff.side, conn.to transm. | 25 |
| External Teeth, Diff.Side | 24 |
| Function | Joint Kit, drive shaft |
| Seal Diameter | 50 mm |
| Length | 172 mm |
| Placement on Vehicle | Front Axle Left, transmission sided |
| Type | Joint Kit, drive shaft |
Important compatibility info
| Function | Radiator Hose |
| Type | Radiator Hose |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 142 mm |
| Thread Size | M16X1,5 |
| External Teeth, Wheel Side | 31 |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 33 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Number of Holes | 6 |
| Outer diameter | 278 mm |
| Brake Disc Thickness | 24 mm |
| Height | 41.2 mm |
| Minimum thickness | 22.5 mm |
| Centering Diameter | 94.9 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Surface | Coated |
| Brake Disc Thickness | 11 mm |
| Rotor Style | Solid |
| Outer diameter | 280 mm |
| Height | 50.8 mm |
| Number of Holes | 5 |
| Minimum thickness | 9 mm |
| Centering Diameter | 63.6 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Homologated |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6054 |
| Replaces | BCA7188 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5421)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6958)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Replaces | BCA7189 |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6053 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5421)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6958)
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Length | 24 mm |
Important compatibility info
| Function | Brake Master Cylinder |
| Length | 25 mm |
| Type | Brake Master Cylinder |
Important compatibility info
| Outer diameter | 302 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 64 mm |
| Minimum thickness | 9.0 mm |
| Number of Holes | 5 |
| Rotor Style | Solid |
| Brake Disc Thickness | 11 mm |
| Height | 60 mm |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6148 |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Impeller Diameter | 78 mm |
| Water Pump Pulley Diameter | 58 mm |
| Type | Water Pump, engine cooling |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
| Length | 138 mm |
| Thread Size | M22X1,5 |
| External Teeth, Wheel Side | 26 |
| Technical Information Number | Middle groove |
| Seal Diameter | 58 mm |
| Function | Joint Kit, drive shaft |
| Additional Information 2 | with groove |
Important compatibility info
| Additional Information 2 | with groove |
| Length | 114 mm |
| Thread Size | M10 |
| External Teeth, Wheel Side | 36 |
| Technical Information Number | Middle groove |
| Seal Diameter | 56.5 mm |
| Internal Teeth, wheel side | 27 |
| Number of Teeth, ABS ring | 48 |
| Transmission Type | AT/MT |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Important compatibility info
| Additional Information 2 | with groove |
| Length | 154 mm |
| Thread Size | M22X1.5 |
| External Teeth, Wheel Side | 27 |
| Technical Information Number | Middle groove |
| Seal Diameter | 60 mm |
| Number of Teeth, ABS ring | 46 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Diameter | 20 mm |
| Paired article numbers | FCA7089 |
Important compatibility info
| Water Pump Pulley Diameter | 77 mm |
| Impeller Diameter | 73 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Replaces | BWP1882 |
Important compatibility info
| Water Pump Pulley Diameter | 64 mm |
| Housing material | Aluminium |
| Impeller Diameter | 50 mm |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Opening Temperature | 89 °C |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
| Housing material | Plastic |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | without sensor |
| Replaces | BTS409.89 |
Important compatibility info
| Rotor Style | Vented |
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 255 mm |
| Brake Disc Thickness | 25 mm |
| Height | 49.3 mm |
| Number of Holes | 4 |
| Minimum thickness | 23 mm |
| Centering Diameter | 55 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Replaces | BBD4783 |
| Number of mounting bores | 2 |
Important compatibility info
| Outer diameter | 262 mm |
| Function | Brake Disc |
| Centering Diameter | 76 mm |
| Minimum thickness | 8.4 mm |
| Number of Holes | 5 |
| Rotor Style | Solid |
| Brake Disc Thickness | 10 mm |
| Height | 61 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Quantity Unit | Set |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 3 |
Important compatibility info
| Water Pump Pulley Diameter | 105 mm |
| Impeller Diameter | 77 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Solid |
| Number of Holes | 4 |
| Minimum thickness | 8.6 mm |
| Centering Diameter | 59.5 mm |
| Outer diameter | 258 mm |
| Height | 57.9 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 10.6 mm |
| Number of mounting bores | 2 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6692 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5556)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6954)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6955)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6693 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5556)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6954)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6955)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Size | M20X1.5 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Length | 130 mm |
Important compatibility info
| Opening Temperature | 88 °C |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
| Outer diameter | 268 mm |
| Brake Disc Thickness | 12 mm |
| Rotor Style | Solid |
| Height | 75 mm |
| Placement on Vehicle | Rear Axle |
| Number of Holes | 4 |
| Surface | Coated |
| Quantity Unit | Set |
| Centering Diameter | 71 mm |
| Minimum thickness | 10 mm |
| Inspection Tag | ECE R90 Homologated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Number of mounting bores | 2 |
Important compatibility info
| Material | Steel |
| Type | Oil sump |
| Function | Oil sump |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6724 |
Important compatibility info
| Replaces | BBT102 |
| Function | Thermostat, coolant |
| Housing material | Plastic |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
Important compatibility info
| Surface | Coated |
| Outer diameter | 238 mm |
| Inspection Tag | ECE R90 Homologated |
| Brake Disc Thickness | 18 mm |
| Height | 48.2 mm |
| Number of Holes | 4 |
| Rotor Style | Vented |
| Minimum thickness | 17 mm |
| Centering Diameter | 54.1 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7007 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7006 |
Important compatibility info
| Surface | Coated |
| Rotor Style | Vented |
| Outer diameter | 257 mm |
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 4 |
| Brake Disc Thickness | 23 mm |
| Height | 44 mm |
| Minimum thickness | 21 mm |
| Centering Diameter | 63.5 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Additional Information 2 | with bolts |
| Function | Central Slave Cylinder, clutch |
| Base body material | Plastic |
| Type | Central Slave Cylinder, clutch |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































