Important compatibility info
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Additional Information 2 | with groove |
Length | 190 mm |
Thread Size | M24X2 |
External Teeth, Wheel Side | 28 |
Technical Information Number | Middle groove |
Transmission Type | Manual Transmission |
Seal Diameter | 59 mm |
Number of Teeth, ABS ring | 48 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 28 |
Important compatibility info
Inner diameter 2 | 52 mm |
Inner diameter 1 | 58 mm |
Function | Charge Air Hose |
Colour | Black |
Material | PE (Polyethylene) |
Placement on Vehicle | Lower, Front |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
Important compatibility info
Placement on Vehicle | Rear |
Outer diameter | 13 mm |
Length | 324 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Inner diameter | 11 mm |
Important compatibility info
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Important compatibility info
Opening Temperature | 85 °C |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Housing material | Plastic |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 6 |
Outer diameter | 280 mm |
Brake Disc Thickness | 27 mm |
Height | 40 mm |
Minimum thickness | 25 mm |
Centering Diameter | 88 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Important compatibility info
Impeller Diameter | 75 mm |
Water Pump Pulley Diameter | 70 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Outer diameter | 324 mm |
Function | Brake Disc |
Centering Diameter | 75 mm |
Minimum thickness | 18.4 mm |
Number of Holes | 5 |
Brake Disc Thickness | 20 mm |
Height | 54 mm |
Rotor Style | Vented |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Rotor Style | Solid |
Function | Brake Disc |
Centering Diameter | 64.1 mm |
Minimum thickness | 8 mm |
Outer diameter | 260 mm |
Brake Disc Thickness | 9 mm |
Height | 39.2 mm |
Number of Holes | 5 |
Type | Brake Disc Rotor |
Quantity Unit | Set |
Placement on Vehicle | Rear Axle |
Surface | Coated |
Number of mounting bores | 3 |
Important compatibility info
Placement on Vehicle | Rear Axle |
Height | 47 mm |
Outer diameter | 296 mm |
Brake Disc Thickness | 10 mm |
Number of Holes | 5 |
Minimum thickness | 8 mm |
Centering Diameter | 62 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | solid |
Important compatibility info
Placement on Vehicle | Rear Axle |
Surface | Coated |
Rotor Style | Solid |
Number of Holes | 5 |
Outer diameter | 288 mm |
Brake Disc Thickness | 12 mm |
Height | 64.9 mm |
Minimum thickness | 10 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Number of mounting bores | 5 |
Important compatibility info
Surface | Coated |
Rotor Style | Solid |
Number of Holes | 5 |
Outer diameter | 245 mm |
Brake Disc Thickness | 9.9 mm |
Height | 54 mm |
Minimum thickness | 8 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Important compatibility info
Rotor Style | Solid |
Number of Holes | 5 |
Brake Disc Thickness | 14.4 mm |
Outer diameter | 270 mm |
Height | 71.5 mm |
Minimum thickness | 13.5 mm |
Centering Diameter | 78.6 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Surface | Coated |
Placement on Vehicle | Front Axle |
Important compatibility info
Length 1 | 1085 mm |
Length 2 | 1423 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Surface | Coated |
Outer diameter | 277 mm |
Rotor Style | Vented |
Number of Holes | 5 |
Brake Disc Thickness | 21 mm |
Height | 51.2 mm |
Minimum thickness | 18 mm |
Centering Diameter | 66 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Material | Steel |
Function | Oil sump |
Type | Oil sump |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 20.8 x 18.3 |
Outer diameter | 181 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 18 |
Important compatibility info
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 2 |
Inner diameter 1 | 32 mm |
Outer diameter 1 | 128 mm |
Width 1 | 58 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 276 mm |
Brake Disc Thickness | 25 mm |
Height | 49.2 mm |
Minimum thickness | 23 mm |
Centering Diameter | 55 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 280 mm |
Rotor Style | Vented |
Brake Disc Thickness | 24 mm |
Height | 55.5 mm |
Minimum thickness | 20 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Rotor Style | Solid |
Brake Disc Thickness | 10 mm |
Outer diameter | 262 mm |
Minimum thickness | 8.4 mm |
Centering Diameter | 75.9 mm |
Function | Brake Disc |
Quantity Unit | Set |
Height | 61.2 mm |
Number of Holes | 5 |
Placement on Vehicle | Rear Axle |
Surface | Coated |
Type | Brake Disc Rotor |
Number of mounting bores | 3 |
Important compatibility info
Placement on Vehicle | both sides |
Length | 118 mm |
Height | 95 mm |
Width | 150 mm |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Important compatibility info
Colour | Black |
Inner diameter 2 | 56 mm |
Material | PE (Polyethylene) |
Inner diameter 1 | 56 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Brake Disc Thickness | 9 mm |
Outer diameter | 278 mm |
Minimum thickness | 8 mm |
Centering Diameter | 62 mm |
Number of Holes | 5 |
Rotor Style | Solid |
Height | 43.4 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 3 |
Important compatibility info
Pipe Diameter | 26 mm |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Thread Size | M20X1.5 |
Length | 160 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Rotor Style | Vented |
Function | Brake Disc |
Centering Diameter | 55 mm |
Minimum thickness | 20 mm |
Outer diameter | 280 mm |
Number of Holes | 4 |
Brake Disc Thickness | 22 mm |
Height | 44 mm |
Type | Brake Disc Rotor |
Quantity Unit | Set |
Placement on Vehicle | Front Axle |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 345 mm |
Brake Disc Thickness | 31.9 mm |
Height | 51 mm |
Minimum thickness | 30 mm |
Centering Diameter | 67 mm |
Function | Brake Disc |
Placement on Vehicle | Front Axle |
Surface | Coated |
Type | Brake Disc Rotor |
Rotor Style | Vented |
Quantity | 1 |
Number of mounting bores | 3 |
Important compatibility info
Wear Warning Contact | incl. wear warning contact |
Width 1 | 193 mm |
Thickness/Strength 1 | 20 mm |
Brake System | Ate - Teves |
Warning Contact Length | 300 mm |
Number of pads | 4 |
Number of Springs | 2 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Height 1 | 71.1 mm |
Height 2 | 74.1 mm |
Important compatibility info
Placement on Vehicle | Front Axle |
Brake Disc Thickness | 22 mm |
Rotor Style | Vented |
Outer diameter | 256 mm |
Height | 46.9 mm |
Number of Holes | 4 |
Minimum thickness | 20 mm |
Centering Diameter | 62 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Surface | Coated |
Number of mounting bores | 2 |
Important compatibility info
Surface | Coated |
Rotor Style | Solid |
Outer diameter | 288 mm |
Brake Disc Thickness | 10 mm |
Height | 64.9 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 55 mm |
Minimum thickness | 8.5 mm |
Number of Holes | 5 |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Number of mounting bores | 3 |
Important compatibility info
Placement on Vehicle | Front Axle |
Number of Holes | 5 |
Outer diameter | 296 mm |
Rotor Style | Vented |
Brake Disc Thickness | 28 mm |
Height | 49 mm |
Minimum thickness | 25 mm |
Centering Diameter | 62 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Number of mounting bores | 2 |
Important compatibility info
Bearing Code | Gen 1 |
Inner diameter 1 | 48 mm |
Outer diameter 1 | 84 mm |
Width 1 | 48 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Number of Holes | 5 |
Outer diameter | 265 mm |
Minimum thickness | 9 mm |
Centering Diameter | 72 mm |
Brake Disc Thickness | 11 mm |
Height | 41 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Surface | Coated |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 20.8 x 18.4 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Teeth | 18 |
Type | Clutch Kit |
Important compatibility info
Wear Warning Contact | prepared for wear warning indicator |
Brake System | Ate - Teves |
Width 1 | 193 mm |
Thickness/Strength 1 | 19 mm |
Number of pads | 4 |
Number of Springs | 2 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 74.1 mm |
Height 2 | 76.8 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Joint Kit, drive shaft |
Int. teeth, diff.side, conn.to transm. | 26 |
External Teeth, Diff.Side | 23 |
Length | 171 mm |
Seal Diameter | 50 mm |
Type | Joint Kit, drive shaft |
Placement on Vehicle | Front Axle Right, transmission sided |
Important compatibility info
Length 1 | 1044 mm |
Length 2 | 1323 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Length 1 | 1173 mm |
Length 2 | 896 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Number of Teeth | 17 |
Number of Parts | 2 -part |
Hub Profile | 20 x 17.2 |
Outer diameter | 220 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Function | Wheel Bearing Kit |
Number of Teeth, ABS ring | 88 |
Outer diameter 1 | 122 mm |
Placement on Vehicle | Rear Axle |
Type | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Important compatibility info
Function | Thermostat, coolant |
Housing material | Plastic |
Housing Type | with housing |
Opening Temperature | 83 °C |
Additional Information | with gaskets/seals |
Type | Thermostat, coolant |
Additional Information 2 | with sensor |
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 83 °C |
Housing Type | with housing |
Additional Information | with gaskets/seals |
Type | Thermostat, coolant |
Important compatibility info
Rotor Style | Solid |
Surface | Coated |
Number of Holes | 5 |
Outer diameter | 280 mm |
Brake Disc Thickness | 10 mm |
Height | 59 mm |
Minimum thickness | 8 mm |
Centering Diameter | 62 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 3 |
Important compatibility info
Rotor Style | Vented |
Type | Brake Disc Rotor |
Height | 37 mm |
Outer diameter | 254 mm |
Brake Disc Thickness | 22 mm |
Number of Holes | 5 |
Minimum thickness | 20 mm |
Centering Diameter | 65 mm |
Quantity Unit | Set |
Function | Brake Disc |
Placement on Vehicle | Rear Axle |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 283 mm |
Height | 38 mm |
Minimum thickness | 22.4 mm |
Centering Diameter | 73.4 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Placement on Vehicle | Front Axle |
Type | Brake Disc Rotor |
Brake Disc Thickness | 23.7 mm |
Important compatibility info
Additional Information 2 | with groove |
Thread Size | M24X1,5 |
Length | 149 mm |
Internal Teeth, wheel side | 35 |
Placement on Vehicle | Front Axle Right, Wheel Side |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Seal Diameter | 63 mm |
External Teeth, Wheel Side | 28 |
Important compatibility info
Outer diameter 2 | 56 mm |
Outer diameter 1 | 138 mm |
Function | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Rotor Style | Vented |
Surface | Coated |
Number of Holes | 5 |
Outer diameter | 275 mm |
Brake Disc Thickness | 25 mm |
Height | 55 mm |
Minimum thickness | 23 mm |
Centering Diameter | 49 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023