Important compatibility info
| Inner diameter 1 | 52 mm |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Colour | Black |
| Material | ACM (Polyacrylate) |
| Placement on Vehicle | Rear, Left, Lower |
| Inner diameter 2 | 52 mm |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2004S)
Important compatibility info
| Function | Brake Drum |
| Overall Height | 69.4 mm |
| Number of Holes | 5 |
| Inner Brake Drum Diameter | 255 mm |
| Type | Brake Drum |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Rotor Style | Vented |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 300 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 20 mm |
| Height | 66 mm |
| Minimum thickness | 18.4 mm |
| Centering Diameter | 75 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
Important compatibility info
| Additional Information 2 | with groove |
| Type | Joint Kit, drive shaft |
| Length | 136 mm |
| Internal Teeth, wheel side | 20 |
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 43 |
| External Teeth, Wheel Side | 25 |
| Thread Size | M18X1,5 |
| Technical Information Number | Middle groove |
| Seal Diameter | 49 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Important compatibility info
| Number of sensors | 1 |
| Opening Temperature | 92 °C |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with sensor |
| Housing Type | with housing |
| Housing material | Aluminium |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
| Function | Master Cylinder, clutch |
| Inner diameter | 15.87 mm |
| Type | Master Cylinder, clutch |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Tie Rod |
| Type | Tie Rod |
Important compatibility info
| Bearing Code | Gen 1 |
| Inner diameter 1 | 45 mm |
| Outer diameter 1 | 86 mm |
| Width 1 | 39 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Rotor Style | Vented |
| Brake Disc Thickness | 24 mm |
| Height | 44 mm |
| Minimum thickness | 21.8 mm |
| Centering Diameter | 61 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Number of Holes | 4 |
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
Important compatibility info
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5126 |
Important compatibility info
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 64.5 mm |
| Minimum thickness | 18 mm |
| Outer diameter | 300 mm |
| Brake Disc Thickness | 20 mm |
| Height | 37.9 mm |
| Number of Holes | 5 |
| Inspection Tag | ECE R90 Homologated |
| Type | Brake Disc Rotor |
| Rotor Style | Vented |
| Placement on Vehicle | Rear Axle |
| Surface | Coated |
Important compatibility info
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Left Front |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7542 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5735)
- 1x Borg & Beck Mounting, control/trailing arm (BSK8155)
- 1x Borg & Beck Mounting, control/trailing arm (BSK8156)
Important compatibility info
| Material | Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7543 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5735)
- 1x Borg & Beck Mounting, control/trailing arm (BSK8155)
- 1x Borg & Beck Mounting, control/trailing arm (BSK8156)
Important compatibility info
| Material | Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 328 mm |
| Brake Disc Thickness | 30 mm |
| Height | 52 mm |
| Minimum thickness | 28 mm |
| Centering Diameter | 63.5 mm |
| Function | Brake Disc |
| Rotor Style | Vented |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Number of belts | 1 |
| Number of Teeth | 129 |
| Width | 22 mm |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6932 |
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 55 mm |
| Material | AEM (Ethylene Acrylate Rubber) |
| Inner diameter 1 | 61 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Outer diameter | 260 mm |
| Minimum thickness | 21 mm |
| Centering Diameter | 64 mm |
| Brake Disc Thickness | 23 mm |
| Height | 47 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 4 |
Important compatibility info
| Replaced by | BWK1188 |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 35 mm |
| Outer diameter | 139 mm |
| Type | Wheel Bearing Kit |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Steel |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5774)
Important compatibility info
| Rotor Style | Vented |
| Outer diameter | 275 mm |
| Brake Disc Thickness | 25 mm |
| Height | 49.5 mm |
| Number of Holes | 5 |
| Minimum thickness | 23 mm |
| Centering Diameter | 62 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of Holes | 4 |
| Outer diameter | 257 mm |
| Brake Disc Thickness | 24.5 mm |
| Height | 47.5 mm |
| Rotor Style | Vented |
| Minimum thickness | 22.4 mm |
| Centering Diameter | 69 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
Important compatibility info
| Height | 37 mm |
| Rotor Style | Solid |
| Function | Brake Disc |
| Outer diameter | 280 mm |
| Brake Disc Thickness | 12 mm |
| Number of Holes | 5 |
| Minimum thickness | 9 mm |
| Centering Diameter | 64 mm |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Outer diameter | 288 mm |
| Brake Disc Thickness | 25 mm |
| Height | 46.5 mm |
| Minimum thickness | 22 mm |
| Centering Diameter | 67 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Length 1 | 1562 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
| Length 2 | 1343 mm |
Important compatibility info
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 300 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 75 mm |
| Minimum thickness | 18.5 mm |
| Brake Disc Thickness | 20 mm |
| Height | 54 mm |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Upper, Rear |
Important compatibility info
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Right Rear |
| Length 1 | 1890 mm |
| Length 2 | 1690 mm |
Important compatibility info
| Surface | Coated |
| Rotor Style | Vented |
| Brake Disc Thickness | 20 mm |
| Outer diameter | 252 mm |
| Number of Holes | 4 |
| Height | 40 mm |
| Minimum thickness | 18 mm |
| Centering Diameter | 60 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 4 |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6149 |
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | both sides |
Important compatibility info
| Function | Brake Drum |
| Overall Height | 72 mm |
| Inner Brake Drum Height | 72 mm |
| Br. Drum outer diameter | 306 mm |
| Inner Brake Drum Diameter | 254 mm |
| Type | Brake Drum |
| Number of Holes | 5 |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Opening Temperature | 83 °C |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with sensor |
| Housing Type | with housing |
| Housing material | Plastic |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
| Inner diameter | 10 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Height | 109 mm |
| Type | Mounting, engine |
| Placement on Vehicle | Left Front |
Important compatibility info
| Inner diameter | 12 mm |
| Distance of fastening bolts | 104 mm |
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Height | 59 mm |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5195 |
| Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Rolling Bearing, suspension strut support mount (BSM5234)
Important compatibility info
| Distance of fastening bolts | 104 mm |
| Height | 59 mm |
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Inner diameter | 12 mm |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5194 |
| Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Rolling Bearing, suspension strut support mount (BSM5234)
Important compatibility info
| Inner Brake Drum Height | 50 mm |
| Br. Drum outer diameter | 236 mm |
| Inspection Tag | ECE R90 Homologated |
| Inner Brake Drum Diameter | 229 mm |
| Overall Height | 69.5 mm |
| Function | Brake Drum |
| Type | Brake Drum |
| Number of Holes | 5 |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Function | Brake Disc |
| Centering Diameter | 64.1 mm |
| Minimum thickness | 24.4 mm |
| Outer diameter | 330 mm |
| Brake Disc Thickness | 26 mm |
| Height | 45.4 mm |
| Number of Holes | 4 |
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
| Number of mounting bores | 1 |
Important compatibility info
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7295 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Outer diameter | 272 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 62 mm |
| Minimum thickness | 20.0 mm |
| Brake Disc Thickness | 22 mm |
| Height | 40 mm |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 4 |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Type | Brake Pad Set, disc brake |
| Width 1 | 140 mm |
| Function | Brake Pad Set, disc brake |
| Height 1 | 61.5 mm |
| Placement on Vehicle | Rear Axle |
| Thickness/Strength 1 | 15 mm |
| Inspection Tag | ECE R90 Homologated |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7143 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Inner diameter 1 | 44 mm |
| Material | NBR (nitrile butadiene rubber) |
| Function | Charge Air Hose |
| Colour | Black |
| Inner diameter 2 | 44 mm |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1005S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1111S)
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Inner diameter 2 | 55 mm |
| Type | Charge Air Hose |
| Inner diameter 1 | 55 mm |
| Colour | Black |
Important compatibility info
| Inner diameter 1 | 46 mm |
| Inner diameter 2 | 46 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Colour | black |
| Additional Information 2 | without sensor |
| Material | Plastic |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































