Important compatibility info
| Material | Silicone |
| Inner diameter 2 | 37 mm |
| Inner diameter 1 | 37 mm |
| Port / Connector type | OE PUSH CONNECTOR |
| Placement on Vehicle | Upper, Front |
| Function | Charge Air Hose |
| Colour | Orange |
| Type | Charge Air Hose |
Important compatibility info
| Opening Temperature | 90 °C |
| Replaced by | BBT246 |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
Important compatibility info
| Function | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 26 |
| External Teeth, Diff.Side | 23 |
| Length | 171 mm |
| Seal Diameter | 50 mm |
| Type | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle Right, transmission sided |
Important compatibility info
| Placement on Vehicle | Front Axle Right, transmission sided |
| External Teeth, Diff.Side | 27 |
| Length | 187 mm |
| Type | Joint Kit, drive shaft |
| Thread Size | 27 |
| Seal Diameter | 38 mm |
| Function | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 24 |
Important compatibility info
| Material | Plastic |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Inner diameter | 19.05 mm |
| Additional Information 2 | with sensor |
Important compatibility info
| Opening Temperature | 92 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Housing material | Plastic |
| Function | Thermostat, coolant |
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 118 mm |
| Height | 95 mm |
| Width | 150 mm |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with integrated ABS sensor |
| Thread Size | M14x1.5 |
| Outer diameter 1 | 136 mm |
| Number of Teeth, ABS ring | 96 |
| Width 1 | 47 mm |
| Outer diameter 2 | 84 mm |
| Bearing Code | Gen 3 |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Important compatibility info
| Water Pump Pulley Diameter | 90 mm |
| Impeller Diameter | 100 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7191 |
| Placement on Vehicle | Front Axle Right, Upper |
Important compatibility info
| Function | Wheel Bearing Kit |
| Width 1 | 78 mm |
| Outer diameter 1 | 135 mm |
| Additional Information 2 | with integrated ABS sensor |
| Bearing Code | Gen 3 |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Wheel Bearing Kit |
| Width 1 | 55 mm |
| Outer diameter 1 | 90 mm |
| Inner diameter 1 | 55 mm |
| Bearing Code | Gen 1 |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Replaced by | BWK1542 |
| Function | Wheel Bearing Kit |
| Width 1 | 58 mm |
| Outer diameter 1 | 139 mm |
| Bearing Code | Gen 3 |
| Placement on Vehicle | Front Axle |
| Type | Wheel Bearing Kit |
Important compatibility info
| Length | 138 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right Front |
Important compatibility info
| Number of Parts | 2 -part |
| Number of Teeth | 14 |
| Hub Profile | 18.8 x 16 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Replaces | HK2259; HK7360 |
| Type | Clutch Kit |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6438 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6437 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 67 mm |
| Minimum thickness | 8.3 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 10 mm |
| Height | 41.5 mm |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Number of mounting bores | 1 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA5978 |
| Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Fastening Bolt, control arm (BSK8002)
- 2x Borg & Beck Mounting, control/trailing arm (BSK6396)
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 326 mm |
| Rotor Style | Vented |
| Brake Disc Thickness | 20 mm |
| Height | 38 mm |
| Minimum thickness | 18 mm |
| Centering Diameter | 64.5 mm |
| Function | Brake Disc |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Number of Teeth | 17 |
| Number of Parts | 2 -part |
| Hub Profile | 20 x 17.2 |
| Outer diameter | 220 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Number of Holes | 5 |
| Outer diameter | 282 mm |
| Height | 47.2 mm |
| Rotor Style | Vented |
| Minimum thickness | 21 mm |
| Centering Diameter | 64.2 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Brake Disc Thickness | 23 mm |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 4 |
Important compatibility info
| Rotor Style | Solid |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Number of Holes | 5 |
| Outer diameter | 280 mm |
| Brake Disc Thickness | 10 mm |
| Height | 59 mm |
| Minimum thickness | 8 mm |
| Centering Diameter | 62 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 3 |
Important compatibility info
| Function | Thermostat, coolant |
| Housing material | Plastic |
| Housing Type | with housing |
| Opening Temperature | 83 °C |
| Additional Information | with gaskets/seals |
| Type | Thermostat, coolant |
| Additional Information 2 | with sensor |
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 83 °C |
| Housing Type | with housing |
| Additional Information | with gaskets/seals |
| Type | Thermostat, coolant |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6367 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6493)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6494)
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Height | 37 mm |
| Outer diameter | 254 mm |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20 mm |
| Centering Diameter | 65 mm |
| Quantity Unit | Set |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Surface | Coated |
| Number of mounting bores | 1 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6366 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6493)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6495)
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Outer diameter | 283 mm |
| Height | 38 mm |
| Minimum thickness | 22.4 mm |
| Centering Diameter | 73.4 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 23.7 mm |
Important compatibility info
| Opening Temperature | 90 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Housing material | Plastic |
| Function | Thermostat, coolant |
Important compatibility info
| Outer diameter | 290 mm |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Brake Disc Thickness | 11 mm |
| Height | 65.2 mm |
| Minimum thickness | 9.4 mm |
| Centering Diameter | 75 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Inspection Tag | ECE R90 Homologated |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Number of Holes | 5 |
| Outer diameter | 275 mm |
| Brake Disc Thickness | 25 mm |
| Height | 55 mm |
| Minimum thickness | 23 mm |
| Centering Diameter | 49 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7435 |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right Front |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 300 mm |
| Rotor Style | Vented |
| Brake Disc Thickness | 22 mm |
| Height | 51.5 mm |
| Minimum thickness | 20 mm |
| Centering Diameter | 79 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Number of mounting bores | 1 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Brake Disc Thickness | 25 mm |
| Outer diameter | 278 mm |
| Number of Holes | 5 |
| Height | 48.5 mm |
| Minimum thickness | 23 mm |
| Centering Diameter | 63.5 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Outer diameter | 290 mm |
| Brake Disc Thickness | 10 mm |
| Height | 55 mm |
| Minimum thickness | 8.3 mm |
| Centering Diameter | 67 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Upper Right |
| Type | Mounting, engine |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Outer diameter | 300 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 65 mm |
| Minimum thickness | 10 mm |
| Brake Disc Thickness | 12 mm |
| Height | 50.1 mm |
| Number of Holes | 9 |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 294 mm |
| Brake Disc Thickness | 24 mm |
| Height | 43 mm |
| Minimum thickness | 22 mm |
| Centering Diameter | 82 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Upper Right |
Important compatibility info
| Rotor Style | Vented |
| Surface | Coated |
| Number of Holes | 6 |
| Outer diameter | 290 mm |
| Brake Disc Thickness | 26 mm |
| Height | 46 mm |
| Minimum thickness | 24 mm |
| Centering Diameter | 93.5 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Inspection Tag | ECE R90 Homologated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Additional Information | without gaskets/seals |
| Number of Teeth | 23 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Oil sump |
| Material | Aluminium |
| Additional Information 2 | with bore for oil-level sensor |
| Type | Oil sump |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Width | 32 mm |
| Quantity Unit | Set |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 20.8 x 18.3 |
| Outer diameter | 181 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 18 |
Important compatibility info
| Thread Measurement 1 | M24X1.5 RHT |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Length | 820 mm |
| Thread Measurement 2 | M16X1.5 |
| Rod/Strut | Push Rod |
| Pipe Diameter | 32 mm |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 296 mm |
| Brake Disc Thickness | 26 mm |
| Height | 44 mm |
| Rotor Style | Vented |
| Minimum thickness | 24 mm |
| Centering Diameter | 68 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Fuel filter |
| Type | Fuel filter |
| Seal Diameter | 28.5 mm |
| Filter type | In-Line Filter |
| Height | 162 mm |
| Additional Information | with gasket/seal |
| Outer diameter | 99 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































