Important compatibility info
Length 3 | 1731 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Length 1 | 755 mm |
Length 2 | 616 mm |
Length 4 | 800 mm |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6206 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5492)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6856)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6857)
Important compatibility info
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 1 | 52 mm |
Colour | Black |
Inner diameter 2 | 52 mm |
Type | Charge Air Hose |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 21 mm |
Important compatibility info
Important compatibility info
Height | 114 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Inner diameter | 10 mm |
Type | Mounting, engine |
Placement on Vehicle | Lower Right |
Important compatibility info
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Dust protection diameter 2 | 79 mm |
Diameter 1 bump stop | 24.5 mm |
Dust protection height | 227 mm |
Dust protection diameter 1 | 57 mm |
Diameter 2 bump stop | 55 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right, Upper |
Paired article numbers | FCA6885 |
Important compatibility info
Length | 70 mm |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | both sides |
Important compatibility info
Material | PE (Polyethylene) |
Function | Charge Air Hose |
Inner diameter 1 | 49 mm |
Type | Charge Air Hose |
Inner diameter 2 | 49 mm |
Colour | Black |
Important compatibility info
Width | 59 mm |
Inner diameter | 8 mm |
Height | 80 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Upper, Rear |
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Lower, Front |
Important compatibility info
Colour | Black |
Inner diameter 1 | 47 mm |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Type | Charge Air Hose |
Inner diameter 2 | 47 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
Function | Suspension Strut Support Mount |
Additional Information 2 | with bearing |
Paired article numbers | FSM5470 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Suspension Strut Support Mount |
Important compatibility info
Thread Size | 24 |
Length | 211 mm |
Function | Joint Kit, drive shaft |
External Teeth, Diff.Side | 24 |
Seal Diameter | 35 mm |
Int. teeth, diff.side, conn.to transm. | 24 |
Placement on Vehicle | Front Axle Right, transmission sided |
Type | Joint Kit, drive shaft |
Important compatibility info
Inner Brake Drum Height | 39 mm |
Br. Drum outer diameter | 204 mm |
Inner Brake Drum Diameter | 180 mm |
Overall Height | 38.5 mm |
Function | Brake Drum |
Type | Brake Drum |
Number of Holes | 4 |
Placement on Vehicle | Rear Axle |
Important compatibility info
Operating Mode | electronically controlled |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Housing material | Plastic |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Opening Temperature | 97 °C |
Important compatibility info
Length 4 | 910 mm |
Length 1 | 1243 mm |
Function | Cable Pull, manual transmission |
Length 2 | 880 mm |
Length 3 | 1120 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6967 |
Important compatibility info
Bearing Code | Gen 2 |
Tightening Torque | 50 Nm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7855 |
Steering arm type | Control Arm |
Material | Grey Cast Iron |
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7048 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8169)
Important compatibility info
Function | Brake Drum |
Overall Height | 58.5 mm |
Inner Brake Drum Height | 45 mm |
Br. Drum outer diameter | 216 mm |
Inner Brake Drum Diameter | 180 mm |
Type | Brake Drum |
Number of Holes | 4 |
Placement on Vehicle | Rear Axle |
Important compatibility info
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7673 |
Placement on Vehicle | Front Axle Right, Lower, Front |
Important compatibility info
Inner diameter 2 | 47 mm |
Inner diameter 1 | 52 mm |
Function | Charge Air Hose |
Colour | Black |
Material | PE (Polyethylene) |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
Colour | Black |
Inner diameter 1 | 38 mm |
Placement on Vehicle | Upper, Front |
Inner diameter 2 | 47 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1102S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Impeller Diameter | 78 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Water Pump Pulley Diameter | 90 mm |
Type | Water Pump, engine cooling |
Important compatibility info
Camber correction | 30 min |
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7241 |
Placement on Vehicle | Front Axle Left, Front Axle Right, Upper |
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Rear, transmission sided |
Type | Mounting, engine |
Important compatibility info
Replaced by | BBT329 |
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Wear Warning Contact | not prepared for wear warning indicator |
Brake System | Sumitomo |
Thickness/Strength 1 | 17.4 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 56.1 mm |
Width 1 | 123.1 mm |
Important compatibility info
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7674 |
Placement on Vehicle | Front Axle Left, Lower, Front |
Important compatibility info
Inner diameter 1 | 30 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Inner diameter 2 | 34 mm |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1001S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1102S)
Important compatibility info
Inner diameter 2 | 50 mm |
Function | Charge Air Hose |
Material | Polychloroprene (Neoprene) |
Inner diameter 1 | 50 mm |
Colour | Black |
Replaced by | BTH1555 |
Type | Charge Air Hose |
Important compatibility info
Outer diameter | 310 mm |
Function | Brake Disc |
Centering Diameter | 139 mm |
Minimum thickness | 37 mm |
Brake Disc Thickness | 40 mm |
Height | 70.5 mm |
Number of Holes | 6 |
Rotor Style | Solid |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Important compatibility info
Outer diameter | 350 mm |
Brake Disc Thickness | 20 mm |
Height | 62 mm |
Function | Brake Disc |
Centering Diameter | 68.2 mm |
Minimum thickness | 18.0 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Aluminium |
Length | 391 mm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7437 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7972)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7437 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7972)
Important compatibility info
Surface | Coated |
Rotor Style | Solid |
Number of Holes | 5 |
Outer diameter | 272 mm |
Brake Disc Thickness | 10 mm |
Height | 83 mm |
Minimum thickness | 8 mm |
Centering Diameter | 75 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Outer diameter | 280 mm |
Rotor Style | Vented |
Minimum thickness | 22 mm |
Centering Diameter | 68 mm |
Height | 43.9 mm |
Number of Holes | 5 |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Brake Disc Thickness | 24 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Number of Teeth | 18 |
Hub Profile | 20.8 x 18.3 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Important compatibility info
Number of Holes | 4 |
Placement on Vehicle | Front Axle |
Outer diameter | 256 mm |
Rotor Style | Vented |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 68 mm |
Minimum thickness | 24 mm |
Height | 53.6 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Brake Disc Thickness | 26 mm |
Important compatibility info
Placement on Vehicle | Rear Axle |
Surface | Coated |
Rotor Style | Vented |
Brake Disc Thickness | 16 mm |
Outer diameter | 310 mm |
Minimum thickness | 14.5 mm |
Centering Diameter | 62 mm |
Number of Holes | 5 |
Height | 67.5 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Number of mounting bores | 18 |
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 283 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 70.8 mm |
Minimum thickness | 24 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Brake Disc Thickness | 26 mm |
Height | 48 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Replaces | BBD5352 |
Number of mounting bores | 3 |
Important compatibility info
Placement on Vehicle | Right Front |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Outer diameter | 14 mm |
Type | Mounting, engine |
Length | 136 mm |
Inner diameter | 11 mm |
Important compatibility info
Inner diameter 1 | 26 mm |
Outer diameter 1 | 143 mm |
Width 1 | 82.5 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 6 |
Outer diameter | 300 mm |
Brake Disc Thickness | 22 mm |
Height | 73.1 mm |
Minimum thickness | 20 mm |
Centering Diameter | 93.6 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 2 |
Important compatibility info
Additional Information | with gaskets/seals |
Height | 69 mm |
Diameter | 40.8 mm |
Opening Temperature | 85 °C |
Housing Type | with housing |
Housing material | Plastic |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Rotor Style | Vented |
Surface | Coated |
Placement on Vehicle | Rear Axle |
Outer diameter | 320 mm |
Function | Brake Disc |
Minimum thickness | 17.5 mm |
Quantity Unit | Set |
Brake Disc Thickness | 20 mm |
Number of Holes | 5 |
Type | Brake Disc Rotor |
Number of mounting bores | 1 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023