Important compatibility info
Number of Holes | 5 |
Outer diameter | 276 mm |
Brake Disc Thickness | 18 mm |
Height | 60 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 67 mm |
Minimum thickness | 15 mm |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Surface | Coated |
Rotor Style | Solid |
Number of mounting bores | 1 |
Important compatibility info
Number of Teeth | 18 |
Hub Profile | 20.6 x 18 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Parts | 3 -part |
Replaced by | HK7839 |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Surface | Coated |
Outer diameter | 295 mm |
Brake Disc Thickness | 26 mm |
Height | 49.2 mm |
Minimum thickness | 24 mm |
Centering Diameter | 55 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Function | Wheel Bearing Kit |
Width 1 | 121 mm |
Outer diameter 1 | 147 mm |
Bearing Code | Gen 3 |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Rod/Strut | Coupling Rod |
Pipe Diameter | 36 mm |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Thread Size | M22/M22 |
Length | 380 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Placement on Vehicle | Front Axle |
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 280 mm |
Brake Disc Thickness | 24 mm |
Height | 44 mm |
Minimum thickness | 22 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Number of mounting bores | 2 |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Height | 54.5 mm |
Outer diameter | 350 mm |
Brake Disc Thickness | 32 mm |
Minimum thickness | 29.4 mm |
Centering Diameter | 67 mm |
Quantity | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Surface | Coated |
Placement on Vehicle | Front Axle |
Number of mounting bores | 4 |
Important compatibility info
External Teeth, Wheel Side | 23 |
Internal Teeth, wheel side | 30 |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Number of Teeth, ABS ring | 44 |
External Teeth, Diff.Side | 30 |
Length | 630 mm |
Important compatibility info
Inner diameter 1 | 56 mm |
Inner diameter 2 | 52 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Colour | Black |
Placement on Vehicle | Rear, Left, Lower |
Material | PE (Polyethylene) |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2004S)
Important compatibility info
Inner diameter 2 | 52 mm |
Inner diameter 1 | 52 mm |
Placement on Vehicle | Rear, Left, Lower |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | PE (Polyethylene) |
Colour | Black |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2004S)
Important compatibility info
Material | Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
Function | Brake Disc |
Brake Disc Type | Vented |
Number of Holes | 12 |
Minimum thickness | 28 mm |
Centering Diameter | 166.1 mm |
Type | Brake Disc |
Height | 110 mm |
Outer diameter | 322 mm |
Brake Disc Thickness | 30 mm |
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | FCA5935 |
Important compatibility info
Function | Wheel Bearing Kit |
Outer diameter 1 | 124 mm |
Inner diameter 1 | 29 mm |
Additional Information 2 | with integrated ABS sensor |
Bearing Code | Gen 3 |
Type | Wheel Bearing Kit |
Width 1 | 105 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 288 mm |
Rotor Style | Vented |
Brake Disc Thickness | 28 mm |
Height | 44 mm |
Minimum thickness | 26 mm |
Centering Diameter | 61 mm |
Function | Brake Disc |
Quantity Unit | Set |
Placement on Vehicle | Front Axle |
Surface | Coated |
Type | Brake Disc Rotor |
Number of mounting bores | 2 |
Important compatibility info
Outer diameter | 131 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thread Size | M12X1,5 |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | with integrated ABS sensor |
Number of Teeth, ABS ring | 88 |
Width 1 | 68.5 mm |
Bearing Code | Gen 3 |
Important compatibility info
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 823 mm |
Important compatibility info
Minimum thickness | 27.75 mm |
Function | Brake Disc |
Height | 128.5 mm |
Centering Diameter | 165 mm |
Type | Brake Disc |
Number of Holes | 8 |
Brake Disc Type | Solid |
Outer diameter | 304 mm |
Brake Disc Thickness | 30 mm |
Important compatibility info
Brake Disc Thickness | 28 mm |
Height | 58.3 mm |
Surface | Coated |
Rotor Style | Vented |
Outer diameter | 257 mm |
Minimum thickness | 26 mm |
Number of Holes | 5 |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Important compatibility info
Colour | Black |
Inner diameter 1 | 47 mm |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Type | Charge Air Hose |
Inner diameter 2 | 47 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
Function | Suspension Strut Support Mount |
Additional Information 2 | with bearing |
Paired article numbers | FSM5470 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Suspension Strut Support Mount |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right, Upper |
Paired article numbers | FCA6885 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7000 |
Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6206 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5492)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6856)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6857)
Important compatibility info
Operating Mode | electronically controlled |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Housing material | Plastic |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Opening Temperature | 97 °C |
Important compatibility info
Impeller Diameter | 78 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Water Pump Pulley Diameter | 90 mm |
Type | Water Pump, engine cooling |
Important compatibility info
Camber correction | 30 min |
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7241 |
Placement on Vehicle | Front Axle Left, Front Axle Right, Upper |
Important compatibility info
Additional Information 2 | with ABS sensor ring, with wheel bearing |
Inner Brake Drum Height | 62 mm |
Br. Drum outer diameter | 247 mm |
Overall Height | 76.5 mm |
Function | Brake Drum |
Inner Brake Drum Diameter | 229 mm |
Type | Brake Drum |
Number of Holes | 4 |
Placement on Vehicle | Rear Axle |
Important compatibility info
Thread Size | 24 |
Length | 211 mm |
Function | Joint Kit, drive shaft |
External Teeth, Diff.Side | 24 |
Seal Diameter | 35 mm |
Int. teeth, diff.side, conn.to transm. | 24 |
Placement on Vehicle | Front Axle Right, transmission sided |
Type | Joint Kit, drive shaft |
Important compatibility info
Wear Warning Contact | not prepared for wear warning indicator |
Brake System | Sumitomo |
Thickness/Strength 1 | 17.4 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 56.1 mm |
Width 1 | 123.1 mm |
Important compatibility info
Function | Tie Rod |
Type | Tie Rod |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Colour | Black |
Inner diameter 1 | 38 mm |
Placement on Vehicle | Upper, Front |
Inner diameter 2 | 47 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1102S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Replaced by | BBT329 |
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Material | Silicone |
Inner diameter 1 | 35 mm |
Colour | Black |
Inner diameter 2 | 35 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1103S)
Important compatibility info
Bearing Code | Gen 2 |
Tightening Torque | 50 Nm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7001 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7855 |
Steering arm type | Control Arm |
Material | Grey Cast Iron |
Important compatibility info
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7673 |
Placement on Vehicle | Front Axle Right, Lower, Front |
Important compatibility info
Inner diameter 1 | 30 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Inner diameter 2 | 34 mm |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1001S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1102S)
Important compatibility info
Inner diameter 2 | 50 mm |
Function | Charge Air Hose |
Material | Polychloroprene (Neoprene) |
Inner diameter 1 | 50 mm |
Colour | Black |
Replaced by | BTH1555 |
Type | Charge Air Hose |
Important compatibility info
Length 1 | 1040 mm |
Length 2 | 1305 mm |
Length 3 | 1018 mm |
Length 4 | 1300 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Length 3 | 1731 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Length 1 | 755 mm |
Length 2 | 616 mm |
Length 4 | 800 mm |
Important compatibility info
Water Pump Pulley Diameter | 90 mm |
Impeller Diameter | 78 mm |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Material | PE (Polyethylene) |
Function | Charge Air Hose |
Inner diameter 1 | 49 mm |
Type | Charge Air Hose |
Inner diameter 2 | 49 mm |
Colour | Black |
Important compatibility info
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Dust protection diameter 2 | 79 mm |
Diameter 1 bump stop | 24.5 mm |
Dust protection height | 227 mm |
Dust protection diameter 1 | 57 mm |
Diameter 2 bump stop | 55 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Lower, Front |
Important compatibility info
Length 4 | 910 mm |
Length 1 | 1243 mm |
Function | Cable Pull, manual transmission |
Length 2 | 880 mm |
Length 3 | 1120 mm |
Type | Cable Pull, manual transmission |
Important compatibility info






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023