Important compatibility info
Wear Warning Contact | not prepared for wear warning indicator |
Brake System | Sumitomo |
Thickness/Strength 1 | 17.4 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 56.1 mm |
Width 1 | 123.1 mm |
Important compatibility info
Thread Size | 24 |
Length | 211 mm |
Function | Joint Kit, drive shaft |
External Teeth, Diff.Side | 24 |
Seal Diameter | 35 mm |
Int. teeth, diff.side, conn.to transm. | 24 |
Placement on Vehicle | Front Axle Right, transmission sided |
Type | Joint Kit, drive shaft |
Important compatibility info
Function | Tie Rod |
Type | Tie Rod |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Replaced by | BBT329 |
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Material | Silicone |
Inner diameter 1 | 35 mm |
Colour | Black |
Inner diameter 2 | 35 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1103S)
Important compatibility info
Bearing Code | Gen 2 |
Tightening Torque | 50 Nm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7001 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7855 |
Steering arm type | Control Arm |
Material | Grey Cast Iron |
Important compatibility info
Colour | Black |
Inner diameter 1 | 38 mm |
Placement on Vehicle | Upper, Front |
Inner diameter 2 | 47 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1102S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7673 |
Placement on Vehicle | Front Axle Right, Lower, Front |
Important compatibility info
Inner diameter 1 | 30 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Inner diameter 2 | 34 mm |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1001S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1102S)
Important compatibility info
Inner diameter 2 | 50 mm |
Function | Charge Air Hose |
Material | Polychloroprene (Neoprene) |
Inner diameter 1 | 50 mm |
Colour | Black |
Replaced by | BTH1555 |
Type | Charge Air Hose |
Important compatibility info
Length 1 | 1040 mm |
Length 2 | 1305 mm |
Length 3 | 1018 mm |
Length 4 | 1300 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Outer diameter | 310 mm |
Function | Brake Disc |
Centering Diameter | 139 mm |
Minimum thickness | 37 mm |
Brake Disc Thickness | 40 mm |
Height | 70.5 mm |
Number of Holes | 6 |
Rotor Style | Solid |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Important compatibility info
Outer diameter | 350 mm |
Brake Disc Thickness | 20 mm |
Height | 62 mm |
Function | Brake Disc |
Centering Diameter | 68.2 mm |
Minimum thickness | 18.0 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Aluminium |
Length | 391 mm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7437 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7972)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7437 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7972)
Important compatibility info
Surface | Coated |
Rotor Style | Solid |
Number of Holes | 5 |
Outer diameter | 272 mm |
Brake Disc Thickness | 10 mm |
Height | 83 mm |
Minimum thickness | 8 mm |
Centering Diameter | 75 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Outer diameter | 280 mm |
Rotor Style | Vented |
Minimum thickness | 22 mm |
Centering Diameter | 68 mm |
Height | 43.9 mm |
Number of Holes | 5 |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Brake Disc Thickness | 24 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Number of Teeth | 18 |
Hub Profile | 20.8 x 18.3 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Important compatibility info
Placement on Vehicle | Rear Axle |
Surface | Coated |
Rotor Style | Vented |
Brake Disc Thickness | 16 mm |
Outer diameter | 310 mm |
Minimum thickness | 14.5 mm |
Centering Diameter | 62 mm |
Number of Holes | 5 |
Height | 67.5 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Number of mounting bores | 18 |
Important compatibility info
Number of Holes | 4 |
Placement on Vehicle | Front Axle |
Outer diameter | 256 mm |
Rotor Style | Vented |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 68 mm |
Minimum thickness | 24 mm |
Height | 53.6 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Brake Disc Thickness | 26 mm |
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 283 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 70.8 mm |
Minimum thickness | 24 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Brake Disc Thickness | 26 mm |
Height | 48 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Replaces | BBD5352 |
Number of mounting bores | 3 |
Important compatibility info
Placement on Vehicle | Right Front |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Outer diameter | 14 mm |
Type | Mounting, engine |
Length | 136 mm |
Inner diameter | 11 mm |
Important compatibility info
Inner diameter 1 | 26 mm |
Outer diameter 1 | 143 mm |
Width 1 | 82.5 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 6 |
Outer diameter | 300 mm |
Brake Disc Thickness | 22 mm |
Height | 73.1 mm |
Minimum thickness | 20 mm |
Centering Diameter | 93.6 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 2 |
Important compatibility info
Additional Information | with gaskets/seals |
Height | 69 mm |
Diameter | 40.8 mm |
Opening Temperature | 85 °C |
Housing Type | with housing |
Housing material | Plastic |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Rotor Style | Vented |
Surface | Coated |
Placement on Vehicle | Rear Axle |
Outer diameter | 320 mm |
Function | Brake Disc |
Minimum thickness | 17.5 mm |
Quantity Unit | Set |
Brake Disc Thickness | 20 mm |
Number of Holes | 5 |
Type | Brake Disc Rotor |
Number of mounting bores | 1 |
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Inner diameter | 11 mm |
Type | Mounting, engine |
Length | 140 mm |
Important compatibility info
Water pump impeller material | Metal |
Impeller Diameter | 52 mm |
Water Pump Pulley Diameter | 124 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Width | 38 mm |
Quantity Unit | Set |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Brake Disc Thickness | 30 mm |
Outer diameter | 344 mm |
Number of Holes | 5 |
Height | 75.8 mm |
Minimum thickness | 28.4 mm |
Centering Diameter | 79 mm |
Function | Brake Disc |
Surface | Coated |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Inner diameter 1 | 31 mm |
Outer diameter 1 | 153 mm |
Width 1 | 88 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Bearing Code | Gen 3 |
Important compatibility info
Surface | Coated |
Rotor Style | Solid |
Brake Disc Thickness | 10 mm |
Outer diameter | 316 mm |
Minimum thickness | 10.5 mm |
Centering Diameter | 72 mm |
Number of Holes | 5 |
Height | 76.5 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Important compatibility info
Rotor Style | Vented |
Outer diameter | 307 mm |
Number of Holes | 5 |
Brake Disc Thickness | 20 mm |
Height | 71 mm |
Function | Brake Disc |
Centering Diameter | 85 mm |
Minimum thickness | 18.4 mm |
Type | Brake Disc Rotor |
Quantity Unit | Set |
Surface | Coated |
Number of mounting bores | 3 |
Placement on Vehicle | Rear Axle |
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 310 mm |
Brake Disc Thickness | 22 mm |
Height | 67.3 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 62 mm |
Minimum thickness | 20.0 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Surface | Coated |
Number of mounting bores | 3 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Material | Grey Cast Iron |
Paired article numbers | FCA6369 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6493)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6494)
Important compatibility info
Material | Grey Cast Iron |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6368 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6493)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6495)
Important compatibility info
Function | Wheel Bearing Kit |
Outer diameter 1 | 124 mm |
Number of Teeth, ABS ring | 96 |
Type | Wheel Bearing Kit |
Width 1 | 110 mm |
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 3 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | without ball joint |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7397 |
Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 280 mm |
Brake Disc Thickness | 26 mm |
Height | 50.4 mm |
Minimum thickness | 23 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 5 |
Important compatibility info
Surface | Coated |
Minimum thickness | 24.0 mm |
Centering Diameter | 68 mm |
Quantity Unit | Set |
Function | Brake Disc |
Outer diameter | 296 mm |
Height | 44 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Brake Disc Thickness | 26 mm |
Important compatibility info
Function | Central Slave Cylinder, clutch |
Base body material | Plastic |
Type | Central Slave Cylinder, clutch |
Important compatibility info
Function | Cable Pull, parking brake |
Length 3 | 1915 mm |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Length 1 | 735 mm |
Length 2 | 593 mm |
Length 4 | 1006 mm |
Important compatibility info
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6673 |
Important compatibility info
Thread Measurement 1 | M28X1.5 RHT |
Thread Measurement 2 | M18X1.5 |
Pipe Diameter | 32 mm |
Length | 495 mm |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Important compatibility info
Length | 505 mm |
Thread Measurement 1 | M24X1.5 RHT |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Pipe Diameter | 26 mm |
Rod/Strut | Push Rod |
Thread Measurement 2 | M14X1.5 |
Important compatibility info
Length | 365 mm |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | FCA8010 |
Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
Placement on Vehicle | Front Axle |
Brake Disc Thickness | 26 mm |
Outer diameter | 280 mm |
Minimum thickness | 24.4 mm |
Centering Diameter | 69 mm |
Number of Holes | 5 |
Height | 47.3 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Number of mounting bores | 2 |
Important compatibility info
Rotor Style | Vented |
Brake Disc Thickness | 28 mm |
Number of Holes | 5 |
Placement on Vehicle | Front Axle |
Outer diameter | 296 mm |
Height | 49.3 mm |
Minimum thickness | 25 mm |
Centering Diameter | 62 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Number of mounting bores | 2 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023