Important compatibility info
Length | 109 mm |
Width | 80 mm |
Inner diameter | 12 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Height | 47 mm |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Important compatibility info
Filter type | High efficiency air filter (HEPA) |
Quantity | 2 |
Type | Filter, cabin air |
Function | Filter, cabin air |
Height | 31 mm |
Width | 180 mm |
Length | 465 mm |
Important compatibility info
Opening Temperature | 54 °C |
Housing Type | without housing |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Rotor Style | Solid |
Brake Disc Thickness | 12 mm |
Outer diameter | 281 mm |
Minimum thickness | 10.5 mm |
Centering Diameter | 62 mm |
Surface | Coated |
Number of Holes | 5 |
Height | 55.1 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 3 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Steel |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7420 |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 275 mm |
Brake Disc Thickness | 22 mm |
Height | 46.5 mm |
Minimum thickness | 20 mm |
Centering Diameter | 55 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Wear Warning Contact | with integrated wear warning contact |
Placement on Vehicle | Front Axle |
Width 1 | 193 mm |
Thickness/Strength 1 | 20.5 mm |
Brake System | Ate - Teves |
Warning Contact Length | 260 mm |
Number of pads | 4 |
Number of Springs | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 72.8 mm |
Height 2 | 72.6 mm |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6912 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6913 |
Important compatibility info
Function | Centre Rod Assembly |
Length | 420 mm |
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M24X1.5 |
Rod/Strut | Push Rod |
Pipe Diameter | 40 mm |
Type | Centre Rod Assembly |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7943 |
Thread Measurement 1 | M14X1.5 |
Steering arm type | Control Arm |
Diameter | 21 mm |
Length | 279 mm |
Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
Inner diameter 2 | 41.5 mm |
Colour | Black |
Inner diameter 1 | 41.5 mm |
Material | Plastic |
Function | Intake Hose, air filter |
Type | Intake Hose, air filter |
Important compatibility info
Function | Cable Pull, parking brake |
Length 3 | 1960 mm |
Type | Cable Pull, parking brake |
Length 4 | 1085 mm |
Length 1 | 965 mm |
Length 2 | 518 mm |
Important compatibility info
Brake System | BREMBO PF 2X68 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Important compatibility info
Thread Type | with left-hand thread |
Thread Measurement 2 | M24X1.5 |
Thread Measurement 1 | M52X1.5 |
Length | 168 mm |
Function | Tie Rod End |
Cone Size | 30 mm |
Type | Tie Rod End |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Minimum thickness | 9.5 mm |
Centering Diameter | 63.5 mm |
Quantity Unit | Set |
Function | Brake Disc |
Number of Holes | 5 |
Rotor Style | Solid |
Outer diameter | 302 mm |
Height | 50.8 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Brake Disc Thickness | 11 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Impeller Diameter | 65 mm |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Surface | Coated |
Number of mounting bores | 3 |
Outer diameter | 302 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 72 mm |
Minimum thickness | 16 mm |
Brake Disc Thickness | 18 mm |
Height | 56.7 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Important compatibility info
Outer diameter | 280 mm |
Minimum thickness | 20 mm |
Centering Diameter | 61.9 mm |
Brake Disc Thickness | 22 mm |
Height | 47 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Material | Aluminium |
Length | 390 mm |
Paired article numbers | FCA8089 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Front |
Steering arm type | Control Arm |
Important compatibility info
Placement on Vehicle | Front |
Opening Temperature | 88 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Important compatibility info
Surface | Coated |
Placement on Vehicle | Front Axle |
Outer diameter | 298 mm |
Function | Brake Disc |
Centering Diameter | 67 mm |
Minimum thickness | 24.0 mm |
Height | 46 mm |
Brake Disc Thickness | 26 mm |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Number of Holes | 5 |
Quantity Unit | Set |
Number of mounting bores | 2 |
Important compatibility info
Type | Joint Kit, drive shaft |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, transmission sided |
Length | 174 mm |
Seal Diameter | 40 mm |
External Teeth, Diff.Side | 29 |
Int. teeth, diff.side, conn.to transm. | 33 |
Function | Joint Kit, drive shaft |
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Outer diameter | 350 mm |
Function | Brake Disc |
Minimum thickness | 26.0 mm |
Brake Disc Thickness | 28 mm |
Height | 75 mm |
Number of Holes | 5 |
Surface | Coated |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Quantity | 1 |
Centering Diameter | 98 mm |
Number of mounting bores | 2 |
Important compatibility info
Surface | Coated |
Placement on Vehicle | Rear Axle Right |
Outer diameter | 350 mm |
Function | Brake Disc |
Minimum thickness | 26.0 mm |
Brake Disc Thickness | 28 mm |
Height | 75 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Quantity | 1 |
Centering Diameter | 98 mm |
Number of mounting bores | 2 |
Important compatibility info
Function | Wiper Motor |
Placement on Vehicle | Front |
Type | Wiper Motor |
Voltage | 12 V |
Additional Information | without rod assembly |
Important compatibility info
Number of pads | 4 |
Thickness/Strength 1 | 20 mm |
Wear Warning Contact | prepared for wear warning indicator |
Brake System | Brembo |
Placement on Vehicle | Front Axle |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 106.3 mm |
Width 1 | 182.5 mm |
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
Length | 503 mm |
Material | Cast Steel |
Steering arm type | Trailing Arm |
Paired article numbers | FCA8076 |
Version | Fitting Kit |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Function | Water Pump, engine cooling |
Water Pump Pulley Diameter | 110 mm |
Housing material | Aluminium |
Impeller Diameter | 82 mm |
Number of Ribs | 6 |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Fuel filter |
Outlet Diameter | 8 mm |
Inlet Diameter | 10 mm |
Diameter | 92 mm |
Height | 125 mm |
Type | Fuel filter |
Filter type | In-Line Filter |
Important compatibility info
Number of pads | 4 |
Wear Warning Contact | prepared for wear warning indicator |
Thickness/Strength 1 | 15.5 mm |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Height 1 | 88.4 mm |
Width 1 | 198 mm |
Important compatibility info
Rotor Style | Solid |
Number of Holes | 5 |
Outer diameter | 284 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 72 mm |
Minimum thickness | 9 mm |
Brake Disc Thickness | 10 mm |
Height | 60 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Important compatibility info
Placement on Vehicle | Front Axle |
Wear Warning Contact | incl. wear warning contact |
Warning Contact Length | 310 mm |
Function | Brake Pad Set, disc brake |
Number of pads | 4 |
Thickness/Strength 1 | 16.8 mm |
Brake System | Brembo |
Type | Brake Pad Set, disc brake |
Height 1 | 94.1 mm |
Width 1 | 189 mm |
Important compatibility info
Function | Tie Rod |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, inner |
Type | Tie Rod |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 20 x 17 |
Outer diameter | 210 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 17 |
Important compatibility info
Housing Type | with housing |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Type | Wheel Bearing Kit |
Outer diameter 1 | 162 mm |
Replaces | BWK1502 |
Placement on Vehicle | Front Axle |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 273 mm |
Height | 49 mm |
Rotor Style | Vented |
Minimum thickness | 24.5 mm |
Centering Diameter | 62 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Brake Disc Thickness | 25 mm |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Operating Mode | Electronic |
Function | Auxiliary water pump (heating water circuit) |
Type | Auxiliary water pump (heating water circuit) |
Important compatibility info
Placement on Vehicle | Front Axle |
Rotor Style | Vented |
Number of Holes | 6 |
Outer diameter | 256 mm |
Brake Disc Thickness | 24 mm |
Height | 24 mm |
Minimum thickness | 22 mm |
Centering Diameter | 86 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Surface | Coated |
Important compatibility info
Inner diameter 1 | 38 mm |
Material | PE (Polyethylene) |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Inner diameter 2 | 38 mm |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2007S)
Important compatibility info
Function | Master Cylinder, clutch |
Inner diameter | 15.87 mm |
Type | Master Cylinder, clutch |
Important compatibility info
Number of Teeth | 18 |
Hub Profile | 20.8 x 18.3 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Important compatibility info
Rotor Style | Vented |
Outer diameter | 296 mm |
Brake Disc Thickness | 30 mm |
Height | 51 mm |
Number of Holes | 5 |
Minimum thickness | 28 mm |
Centering Diameter | 67.5 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Function | Charge Air Hose |
Material | PE (Polyethylene) |
Colour | Black |
Inner diameter 2 | 48 mm |
Inner diameter 1 | 57 mm |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Rod/Strut | Push Rod |
Type | Centre Rod Assembly |
Pipe Diameter | 51 mm |
Function | Centre Rod Assembly |
Length | 505 mm |
Thread Measurement 1 | M24X1.5 RHT |
Thread Measurement 2 | M16X1.5 |
Important compatibility info
Pipe Diameter | 36 mm |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Thread Size | M24/M22 |
Length | 380 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Type | Centre Rod Assembly |
Length | 555 mm |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6276 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5596)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7405)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6514)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023