Important compatibility info
| Additional Information 2 | with groove |
| Technical Information Number | Middle groove |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Thread Size | M24X1,5 |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 67 mm |
| Function | Joint Kit, drive shaft |
| Length | 178 mm |
| External Teeth, Wheel Side | 29 |
| Internal Teeth, wheel side | 27 |
Important compatibility info
| Additional Information 2 | with groove |
| Seal Diameter | 53 mm |
| External Teeth, Wheel Side | 17 |
| Internal Teeth, wheel side | 26 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Technical Information Number | Middle groove |
| Length | 215 mm |
Important compatibility info
| Additional Information 2 | with groove |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Thread Size | M16X1,5 |
| Technical Information Number | Middle groove |
| Internal Teeth, wheel side | 29 |
| Length | 104 mm |
| Seal Diameter | 59.5 mm |
| External Teeth, Wheel Side | 38 |
Important compatibility info
| Additional Information 2 | with ABS sensor ring, with wheel bearing |
| Inner Brake Drum Height | 62 mm |
| Br. Drum outer diameter | 247 mm |
| Overall Height | 76.5 mm |
| Function | Brake Drum |
| Inner Brake Drum Diameter | 229 mm |
| Type | Brake Drum |
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 4 |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Material | Cast Steel |
| Type | Mounting, engine |
| Placement on Vehicle | Upper Left |
Important compatibility info
| Placement on Vehicle | Rear, Left, Lower |
| Material | AEM (Ethylene Acrylate Rubber) |
| Colour | Black |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Inner diameter 2 | 48 mm |
| Inner diameter 1 | 48 mm |
| Replaces | BTH1089 |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2005S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2004S)
Important compatibility info
| Number of Holes | 5 |
| Outer diameter | 275 mm |
| Rotor Style | Vented |
| Brake Disc Thickness | 22 mm |
| Height | 46.5 mm |
| Minimum thickness | 20 mm |
| Centering Diameter | 62 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
Important compatibility info
| Surface | Coated |
| Brake Disc Thickness | 34 mm |
| Outer diameter | 349 mm |
| Height | 62 mm |
| Inspection Tag | ECE R90 Homologated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Rotor Style | Vented |
| Centering Diameter | 79 mm |
| Minimum thickness | 32 mm |
| Number of Holes | 5 |
| Number of mounting bores | 1 |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
| Replaced by | BWP2015 |
Important compatibility info
| Outer diameter 1 | 150 mm |
| Width 1 | 105 mm |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 2 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA5864 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6126)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6128)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA5865 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6126)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6127)
Important compatibility info
| Placement on Vehicle | Upper Right |
| Length | 109 mm |
| Width | 52 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Outer diameter | 10 mm |
| Inner diameter | 10 mm |
| Type | Mounting, engine |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | incl. wear warning contact |
| Height 1 | 79 mm |
| Width 1 | 170 mm |
| Thickness/Strength 1 | 18 mm |
| Number of pads | 4 |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Homologated |
Important compatibility info
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5343 |
Important compatibility info
| Height | 64 mm |
| Paired article numbers | FSM5528 |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | with bearing |
| Distance of fastening bolts | 136 mm |
| Inner diameter | 13 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Suspension Strut Support Mount |
| Thread Size | M10 |
Important compatibility info
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 256 mm |
| Rotor Style | Vented |
| Number of Holes | 4 |
| Brake Disc Thickness | 24 mm |
| Height | 45.6 mm |
| Minimum thickness | 21.5 mm |
| Centering Diameter | 69 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 276 mm |
| Brake Disc Thickness | 20 mm |
| Height | 40 mm |
| Rotor Style | Vented |
| Minimum thickness | 18 mm |
| Centering Diameter | 62 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Inner Brake Drum Height | 67 mm |
| Br. Drum outer diameter | 294 mm |
| Inner Brake Drum Diameter | 254 mm |
| Overall Height | 75 mm |
| Function | Brake Drum |
| Type | Brake Drum |
| Number of Holes | 5 |
| Placement on Vehicle | Rear Axle |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















