Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 2182.99 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| External Teeth, Wheel Side | 26 |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 172407 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1255 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Teeth | 23 |
| Number of Wings | 8 |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M10x1,5 |
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 23 |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Thickness | 15.7 mm |
| Inner diameter | 85 mm |
| Outer diameter 1 | 131 mm |
| Outer diameter 2 | 152 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shaft Seal, drive shaft |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 85 mm |
| Thickness | 33 mm |
| Outer diameter | 155 mm |
| Material | FPM (fluoride rubber) |
| Type | Shaft Seal, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 131 mm |
| Material | Rubber/Metal |
| Paired article numbers | 104215 |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Height | 65 mm |
| Width | 119 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 112.9 mm |
| Width | 48.1 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18 mm |
| Additional Information 2 | with anti-squeak plate, with brake caliper screws, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Alternator Freewheel Clutch |
| Number of Ribs | 7 |
| Function | Alternator Freewheel Clutch |
| Inner diameter | 17 mm |
| Additional Information 2 | with lid |
| Outer diameter | 63 mm |
| Width | 38 mm |
| Manufacturer Restriction | Bosch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wheel Bearing |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 80 mm |
| Outer diameter | 130 mm |
| Width | 38 mm |
| Placement on Vehicle | inner |
| Type | Wheel Bearing |
| Bearing Code | 33116 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 147 mm |
| Outer diameter | 80 mm |
| External Teeth, Wheel Side | 22 |
| Seal Diameter | 69 mm |
| Internal Teeth, wheel side | 22 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 12.5 mm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Outer diameter | 40.2 mm |
| Thickness | 49 mm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 107 mm |
| Additional Information 2 | with seal ring |
| Filter type | Spin-on Filter |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 90 mm |
| Internal Thread Size | 1" - 14 UNS |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 271.5 mm |
| Housing Diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 489 mm |
| Mounting points diameter | 16.5 mm |
| Stroke | 192 mm |
| Eject Force | 190 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 20 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | incl. wear warning contact |
| Width | 72.9 mm |
| Length | 156.4 mm. 155.2 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
| Replaces | 16586; 16712 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1 699 249 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 270 mm |
| Outer diameter | 85.5 mm. 92 mm |
| Function | Bellow, driver cab suspension |
| Type | Bellow, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | FPM (fluoride rubber) |
| Outer diameter | 175 mm |
| Thickness | 18 mm |
| Inner diameter | 135 mm |
| Function | Shaft Seal, wheel hub |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















