Important compatibility info
| Placement on Vehicle | Front Axle |
| for OE number | 910 321 02 00 S1 |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (185342)
- 2x Febi Protective Cap/Bellow, shock absorber (180629)
Important compatibility info
| Length | 161 mm |
| Placement on Vehicle | Wheel Side |
| Outer diameter | 89 mm |
| External Teeth, Wheel Side | 29 |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 35 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 2600 mm |
| Placement on Vehicle | Front Axle Right |
| Length | 2675 mm |
| Paired article numbers | 47329 |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 31349244 |
| Number of Connectors / Ports | 2 |
| Pump Type | Dual Pump |
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.1 mm |
| Width | 58 mm |
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Front Axle |
| Length | 132.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Lock System | with two keys |
| Type | Lock Cylinder |
| Function | Lock Cylinder |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 142 mm |
| Material | Rubber/Metal |
| Outer diameter | 90 mm |
| Inner diameter | 14 mm |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Length | 166 mm |
| Height | 50 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Splash Guard, brake disc |
| Paired article numbers | 174919 |
| Placement on Vehicle | Front Axle Left |
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 62 mm |
| Outer diameter | 120 mm |
| Inner diameter | 28 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (24230)
- 1x Febi Cap, wheel bearing (24232)
Important compatibility info
| Outer diameter | 8 mm |
| Function | Fuel Hose |
| Length | 170 mm |
| Type | Fuel Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Material | Thermoplast, PU (Polyurethane) |
| Length | 220 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (175630)
- 2x Febi Rubber Buffer, suspension (170772)
Important compatibility info
| Width | 650 mm |
| Type | Mudflap |
| Height | 300 mm |
| Function | Mudflap |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 75 mm |
| Type | Mounting, control/trailing arm |
| Inner diameter | 14 mm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right, inner, Lower |
| Outer diameter | 50.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 23 |
| Thread Size | M20x1,5 |
| Placement on Vehicle | Front Axle, Wheel Side |
| Internal Teeth, wheel side | 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 05921 |
| Placement on Vehicle | Lower Front Axle, Right |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5, M8 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 429 mm |
| Paired article numbers | 02633 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 129.8 mm |
| Width | 56 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Width of castor bearing surface | 26 mm |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















