Important compatibility info
| Length 4 | 1132 mm |
| Length 2 | 857 mm |
| Length 3 | 1236 mm |
| Length 1 | 940 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Type | Joint Kit, drive shaft |
| Seal Diameter | 59 mm |
| External Teeth, Wheel Side | 28 |
| Additional Information 2 | with groove |
| Function | Joint Kit, drive shaft |
| Technical Information Number | Middle groove |
| Length | 153 mm |
| Thread Size | M24X1,5 |
| Internal Teeth, wheel side | 26 |
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Length | 577 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 35 |
Important compatibility info
| Length | 622 mm |
| External Teeth, Wheel Side | 21 |
| Seal Diameter | 48 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 22 |
| Type | Drive Shaft |
Important compatibility info
| Length 1 | 1832 mm |
| Function | Cable Pull, manual transmission |
| Length 3 | 1580 mm |
| Length 4 | 1280 mm |
| Length 2 | 1628 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 4 | 945 mm |
| Length 3 | 975 mm |
| Length 2 | 1223 mm |
| Length 1 | 1307 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6979 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 14 mm |
| Paired article numbers | FCA7956 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Diameter | 20 mm |
| Length | 304 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Length | 283 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M16x1.5 |
| Paired article numbers | FCA8177 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Number of Wings | 8 |
| Impeller Diameter | 70 mm |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Height | 105 mm |
| Number of Holes | 5 |
| Water Pump Pulley Diameter | 54 mm |
| Water pump impeller material | Metal |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7559 |
Important compatibility info
| Rotor Style | Vented |
| Function | Brake Disc |
| Centering Diameter | 68 mm |
| Minimum thickness | 32 mm |
| Outer diameter | 350 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 34 mm |
| Height | 52.2 mm |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Quantity | 1 |
| Placement on Vehicle | Front Axle Left |
| Surface | Coated |
| Number of mounting bores | 1 |
Important compatibility info
| Type | Clutch Kit |
| Number of Teeth | 20 |
| Number of Parts | 3 -part |
| Hub Profile | 22.4 x 19.9 |
| Outer diameter | 215 mm |
| Function | Clutch Kit |
Important compatibility info
| Length 1 | 1016 mm |
| Function | Cable Pull, manual transmission |
| Length 3 | 1020 mm |
| Length 4 | 760 mm |
| Type | Cable Pull, manual transmission |
| Length 2 | 743 mm |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
| Number of Holes | 5 |
| Outer diameter | 330 mm |
| Rotor Style | Vented |
| Brake Disc Thickness | 22 mm |
| Height | 37.9 mm |
| Minimum thickness | 20 mm |
| Centering Diameter | 67.9 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Surface | Coated |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Brake Disc |
| Centering Diameter | 63.6 mm |
| Minimum thickness | 9.5 mm |
| Outer diameter | 302 mm |
| Number of Holes | 5 |
| Rotor Style | Solid |
| Brake Disc Thickness | 12 mm |
| Height | 42.8 mm |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Quantity Unit | Set |
| Surface | Coated |
| Number of mounting bores | 1 |
Important compatibility info
| Outer diameter | 257 mm |
| Number of Holes | 4 |
| Rotor Style | Vented |
| Brake Disc Thickness | 24 mm |
| Height | 45 mm |
| Minimum thickness | 22.4 mm |
| Centering Diameter | 69 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Number of Teeth | 24 |
| Hub Profile | 20.4 x 18.4 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
Important compatibility info
| Placement on Vehicle | Left Rear |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length 1 | 1677 mm |
| Length 2 | 1403 mm |
Important compatibility info
| Length | 650 mm |
| External Teeth, Wheel Side | 24 |
| External Teeth, Diff.Side | 23 |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1221)
Important compatibility info
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6419 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7351)
Important compatibility info
| Hub Profile | 25.9 x 23.1 |
| Outer diameter | 240 mm |
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
| Number of Teeth | 23 |
Important compatibility info
| Rotor Style | Vented |
| Outer diameter | 350 mm |
| Minimum thickness | 29.5 mm |
| Centering Diameter | 67 mm |
| Brake Disc Thickness | 32.2 mm |
| Height | 54.7 mm |
| Number of Holes | 5 |
| Function | Brake Disc |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 3 |
Important compatibility info
| Length 4 | 1169 mm |
| Length 1 | 969 mm |
| Length 2 | 1310 mm |
| Length 3 | 885 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Rotor Style | Solid |
| Number of Holes | 5 |
| Outer diameter | 300 mm |
| Minimum thickness | 14.2 mm |
| Centering Diameter | 79 mm |
| Brake Disc Thickness | 16 mm |
| Height | 80 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 5 |
Important compatibility info
| Outer diameter | 228 mm |
| Hub Profile | 19.4 x 16.8 |
| Type | Clutch Kit |
| Number of Teeth | 17 |
| Function | Clutch Kit |
| Number of Parts | 2 -part |
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 70 mm |
| Minimum thickness | 26.0 mm |
| Outer diameter | 305 mm |
| Number of Holes | 7 |
| Rotor Style | Vented |
| Brake Disc Thickness | 28 mm |
| Height | 45.2 mm |
| Number of mounting bores | 1 |
| Inspection Tag | ECE R90 Homologated |
| Type | Brake Disc Rotor |
| Quantity Unit | Set |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
Important compatibility info
| Length | 675 mm |
| External Teeth, Wheel Side | 23 |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1215)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 37 mm |
| Outer diameter | 314 mm |
| Brake Disc Thickness | 20 mm |
| Number of Holes | 5 |
| Minimum thickness | 18 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
| Number of mounting bores | 2 |
| Inspection Tag | ECE R90 Homologated |
Important compatibility info
| for centre hole diameter of | 30 mm |
| Function | Suspension, propshaft |
| Number of Holes | 2 |
| Thickness | 59 mm |
| Length | 175 mm |
| Type | Suspension, propshaft |
Important compatibility info
| Material | Steel |
| Function | Oil sump |
| Type | Oil sump |
| Additional Information 2 | with bore for oil-level sensor |
Important compatibility info
| Function | Wheel Bearing Kit |
| Width 1 | 90 mm |
| Outer diameter 1 | 195 mm |
| Inner diameter 1 | 44 mm |
| Bearing Code | Gen 3 |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
Important compatibility info
| Bearing Code | Gen 2 |
| Inner diameter 1 | 32 mm |
| Outer diameter 1 | 129 mm |
| Width 1 | 59 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Important compatibility info
| Number of Holes | 12 |
| Outer diameter | 330 mm |
| Minimum thickness | 28 mm |
| Brake Disc Type | Vented |
| Brake Disc Thickness | 34 mm |
| Height | 113 mm |
| Function | Brake Disc |
| Type | Brake Disc |
| Centering Diameter | 95 mm |
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 152 mm |
| Type | Brake Disc |
| Number of Holes | 8 |
| Outer diameter | 335 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Vented |
| Height | 111 mm |
| Minimum thickness | 28 mm |
Important compatibility info
| Pipe Diameter | 36 mm |
| Thread Measurement 2 | M18X1.5 |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Thread Measurement 1 | M28X1.5 |
| Length | 505 mm |
Important compatibility info
| Outer diameter | 360 mm |
| Function | Brake Disc |
| Centering Diameter | 98 mm |
| Minimum thickness | 34.0 mm |
| Brake Disc Thickness | 36 mm |
| Height | 68.6 mm |
| Number of Holes | 5 |
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle Right |
| Surface | Coated |
| Number of mounting bores | 2 |
Important compatibility info
Important compatibility info
| Material | Steel |
| Function | Oil sump |
| Type | Oil sump |
Important compatibility info
| Length 3 | 1230 mm |
| Length 4 | 975 mm |
| Length 2 | 991 mm |
| Length 1 | 1310 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Outer diameter | 280 mm |
| Minimum thickness | 14.2 mm |
| Centering Diameter | 72 mm |
| Brake Disc Thickness | 16 mm |
| Height | 80 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Number of mounting bores | 5 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Rotor Style | Vented |
| Minimum thickness | 23 mm |
| Centering Diameter | 96 mm |
| Quantity Unit | Set |
| Function | Brake Disc |
| Outer diameter | 290 mm |
| Brake Disc Thickness | 26 mm |
| Height | 53 mm |
| Number of Holes | 6 |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Outer diameter | 300 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 24 mm |
| Height | 73.5 mm |
| Minimum thickness | 22.4 mm |
| Centering Diameter | 79 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Outer diameter | 141 mm |
| Thickness | 30 mm |
| Inner diameter | 56 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 313 mm |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Brake Disc Thickness | 26 mm |
| Height | 56.2 mm |
| Minimum thickness | 22 mm |
| Centering Diameter | 68 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 23 x 20.1 |
| Outer diameter | 215 mm |
| Function | Clutch Kit |
| Replaces | HK2371; HK2374; HK2085 |
| Type | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 258 mm |
| Brake Disc Thickness | 24 mm |
| Height | 50 mm |
| Number of Holes | 4 |
| Rotor Style | Vented |
| Minimum thickness | 22 mm |
| Centering Diameter | 57 mm |
| Function | Brake Disc |
| Surface | Coated |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right Front |
Important compatibility info
| Water pump impeller material | Metal |
| Height | 75 mm |
| Number of mounting holes at thermostat housing | 4 |
| Number of Ribs | 6 |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Impeller Diameter | 62 mm |
| Water Pump Pulley Diameter | 94 mm |
| Type | Water Pump, engine cooling |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































