Important compatibility info
| Number of Teeth, ABS ring | 48 |
| Internal Teeth, wheel side | 24 |
| Function | Joint Kit, drive shaft |
| Seal Diameter | 62.1 mm |
| Type | Joint Kit, drive shaft |
| Thread Size | M22X1,5 |
| Technical Information Number | Middle groove |
| External Teeth, Wheel Side | 27 |
| Length | 158 mm |
| Additional Information 2 | with groove |
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Brake System | Sumitomo |
| Height 1 | 60 mm |
| Thickness/Strength 1 | 19.8 mm |
| Number of pads | 8 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Width 1 | 125.1 mm |
| Inspection Tag | ECE R90 Homologated |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Thread Measurement 1 | M12X1.25 |
| Steering arm type | Control Arm |
| Material | Steel |
| Length | 283 mm |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 276 mm |
| Rotor Style | Vented |
| Brake Disc Thickness | 24 mm |
| Height | 45 mm |
| Minimum thickness | 22.5 mm |
| Centering Diameter | 69 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Hub Profile | 20.3 x 18 |
| Outer diameter | 180 mm |
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
| Number of Teeth | 18 |
Important compatibility info
| Outer diameter | 278 mm |
| Minimum thickness | 10 mm |
| Centering Diameter | 70 mm |
| Rotor Style | Solid |
| Brake Disc Thickness | 12 mm |
| Height | 42 mm |
| Number of Holes | 5 |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 5 |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Bearing Code | Gen 3 |
| Inner diameter 1 | 34 mm |
| Outer diameter 1 | 151 mm |
| Width 1 | 103 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Important compatibility info
| Number of Teeth | 20 |
| Number of Parts | 3 -part |
| Hub Profile | 23 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Outer diameter | 320 mm |
| Brake Disc Thickness | 22 mm |
| Height | 60.5 mm |
| Minimum thickness | 20.4 mm |
| Centering Diameter | 75 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Voltage | 12 V |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Important compatibility info
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Brake Disc Thickness | 22 mm |
| Outer diameter | 330 mm |
| Number of Holes | 5 |
| Height | 42.5 mm |
| Minimum thickness | 20 mm |
| Centering Diameter | 65 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Vented |
| Quantity | 1 |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Inner diameter 1 | 30 mm |
| Outer diameter 1 | 117 mm |
| Width 1 | 63 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Bearing Code | Gen 2 |
Important compatibility info
| Rotor Style | Vented |
| Function | Brake Disc |
| Centering Diameter | 68 mm |
| Minimum thickness | 32.0 mm |
| Outer diameter | 350 mm |
| Brake Disc Thickness | 34 mm |
| Height | 52.2 mm |
| Number of Holes | 5 |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Quantity | 1 |
| Placement on Vehicle | Front Axle Right |
| Surface | Coated |
| Number of mounting bores | 1 |
Important compatibility info
| Rotor Style | Vented |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 58 mm |
| Minimum thickness | 15 mm |
| Outer diameter | 300 mm |
| Number of Holes | 5 |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Height | 46.4 mm |
| Brake Disc Thickness | 17 mm |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 2 |
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Length | 475 mm |
| Transmission Type | Manual Transmission |
| Diameter 2 | 75 mm |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1192)
Important compatibility info
| Length 1 | 1310 mm |
| Function | Brake Hose |
| Length | 196 mm |
| Thread Type | with external thread |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle, Left, outer |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Function | Brake Disc |
| Minimum thickness | 34 mm |
| Centering Diameter | 67 mm |
| Number of Holes | 5 |
| Outer diameter | 360 mm |
| Brake Disc Thickness | 36 mm |
| Height | 66 mm |
| Rotor Style | perforated/vented |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Number of Parts | 2 -part |
| Number of Teeth | 14 |
| Hub Profile | 25.1 x 22 |
| Outer diameter | 228 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Replaces | HK7277 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Width | 40 mm |
| Quantity Unit | Set |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Centre Rod Assembly |
| Thread Measurement 2 | M30X1.5 |
| Length | 572 mm |
| Thread Measurement 1 | M20X1.5 |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
Important compatibility info
| Length | 879 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
Important compatibility info
| Length 1 | 925 mm |
| Length 2 | 1090 mm |
| Length 3 | 1215 mm |
| Length 4 | 1399 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Hub Profile | 22.1 x 19.1 |
| Number of Parts | 3 -part |
| Outer diameter | 172 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Hub Profile | 21.9 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 26 |
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Length | 24 mm |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6261 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Thread Measurement 1 | M16x1.5 |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6629 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5591)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6956)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6828 |
| Replaces | BCA7101 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6827 |
| Replaces | BCA7102 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6917 |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
Important compatibility info
| Length 2 | 890 mm |
| Length 3 | 1240 mm |
| Length 1 | 1120 mm |
| Length 4 | 905 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 825 mm |
| Length 1 | 1155 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| for centre hole diameter of | 40 mm |
| Function | Suspension, propshaft |
| Thickness | 18 mm |
| Height | 125 mm |
| Length | 205 mm |
| Type | Suspension, propshaft |
| Placement on Vehicle | Centre |
Important compatibility info
| Inner diameter 2 | 26 mm |
| Function | Intake Hose, air filter |
| Inner diameter 1 | 26 mm |
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Type | Intake Hose, air filter |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
Important compatibility info
| Length 1 | 900 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Length 2 | 673 mm |
| Length 3 | 825 mm |
| Length 4 | 664 mm |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 955 mm |
| Length 4 | 1329 mm |
| Length 3 | 1222 mm |
| Length 2 | 1038 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 1098 mm |
| Length 3 | 1387 mm |
| Length 4 | 1361 mm |
| Length 1 | 1106 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 3 | 1137 mm |
| Length 2 | 802 mm |
| Length 4 | 1021 mm |
| Length 1 | 860 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 4 | 856 mm |
| Length 2 | 863 mm |
| Length 3 | 1213 mm |
| Length 1 | 1204 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Length 4 | 1097 mm |
| Length 3 | 810 mm |
| Length 2 | 1150 mm |
| Length 1 | 800 mm |
Important compatibility info
| Length | 168 mm |
| Type | Joint Kit, drive shaft |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Wheel Side |
| Int. teeth, diff.side, conn.to transm. | 29 |
| Function | Joint Kit, drive shaft |
| Seal Diameter | 64 mm |
Important compatibility info
| Internal Teeth, wheel side | 33 |
| Thread Size | M24X1,5 |
| Seal Diameter | 51.1 mm |
| Length | 146 mm |
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 25 |
| Additional Information 2 | with groove |
| Type | Joint Kit, drive shaft |
Important compatibility info
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 25 |
| Function | Drive Shaft |
| Number of Teeth, ABS ring | 50 |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Length | 610 mm |
Important compatibility info
| Function | Drive Shaft |
| Length | 610 mm |
| Number of Teeth, ABS ring | 48 |
| External Teeth, Diff.Side | 22 |
| External Teeth, Wheel Side | 21 |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| External Teeth, Wheel Side | 21 |
| Length | 567 mm |
Important compatibility info
| Steering arm type | Control Arm |
| Material | Steel |
| Length | 365 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA8015 |
Important compatibility info
| Type | Wiper Motor |
| Placement on Vehicle | Front |
| Voltage | 12 V |
| Function | Wiper Motor |
| Additional Information | without rod assembly |
Important compatibility info
| Length 1 | 673 mm |
| Length 2 | 661 mm |
| Length 3 | 938 mm |
| Length 4 | 945 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 855 mm |
| Length 2 | 718 mm |
| Length 3 | 1131 mm |
| Length 4 | 1046 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































