Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Material | Sheet Steel |
| Placement on Vehicle | Upper Right |
Important compatibility info
| Inner diameter 2 | 50 mm |
| Colour | Black |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Material | AEM (Ethylene Acrylate Rubber) |
| Inner diameter 1 | 50 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
| Water pump impeller material | Plastic |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Impeller Diameter | 79.5 mm |
| Water Pump Pulley Diameter | 78 mm |
Important compatibility info
| Length 4 | 1132 mm |
| Length 2 | 857 mm |
| Length 3 | 1236 mm |
| Length 1 | 940 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Voltage | 12 V |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Important compatibility info
| Type | Joint Kit, drive shaft |
| Seal Diameter | 59 mm |
| External Teeth, Wheel Side | 28 |
| Additional Information 2 | with groove |
| Function | Joint Kit, drive shaft |
| Technical Information Number | Middle groove |
| Length | 153 mm |
| Thread Size | M24X1,5 |
| Internal Teeth, wheel side | 26 |
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Length | 577 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 35 |
Important compatibility info
| Length | 622 mm |
| External Teeth, Wheel Side | 21 |
| Seal Diameter | 48 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 22 |
| Type | Drive Shaft |
Important compatibility info
| Length 1 | 1832 mm |
| Function | Cable Pull, manual transmission |
| Length 3 | 1580 mm |
| Length 4 | 1280 mm |
| Length 2 | 1628 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 4 | 945 mm |
| Length 3 | 975 mm |
| Length 2 | 1223 mm |
| Length 1 | 1307 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 14 mm |
| Paired article numbers | FCA7956 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Diameter | 20 mm |
| Length | 304 mm |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7559 |
Important compatibility info
| Rotor Style | Vented |
| Function | Brake Disc |
| Centering Diameter | 68 mm |
| Minimum thickness | 32 mm |
| Outer diameter | 350 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 34 mm |
| Height | 52.2 mm |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Quantity | 1 |
| Placement on Vehicle | Front Axle Left |
| Surface | Coated |
| Number of mounting bores | 1 |
Important compatibility info
| Type | Clutch Kit |
| Number of Teeth | 20 |
| Number of Parts | 3 -part |
| Hub Profile | 22.4 x 19.9 |
| Outer diameter | 215 mm |
| Function | Clutch Kit |
Important compatibility info
| Length 1 | 1016 mm |
| Function | Cable Pull, manual transmission |
| Length 3 | 1020 mm |
| Length 4 | 760 mm |
| Type | Cable Pull, manual transmission |
| Length 2 | 743 mm |
Important compatibility info
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Length | 831 mm |
| Function | Centre Rod Assembly |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
| Number of Holes | 5 |
| Outer diameter | 330 mm |
| Rotor Style | Vented |
| Brake Disc Thickness | 22 mm |
| Height | 37.9 mm |
| Minimum thickness | 20 mm |
| Centering Diameter | 67.9 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Surface | Coated |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Brake Disc |
| Centering Diameter | 63.6 mm |
| Minimum thickness | 9.5 mm |
| Outer diameter | 302 mm |
| Number of Holes | 5 |
| Rotor Style | Solid |
| Brake Disc Thickness | 12 mm |
| Height | 42.8 mm |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Quantity Unit | Set |
| Surface | Coated |
| Number of mounting bores | 1 |
Important compatibility info
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Function | Fuel filter |
Important compatibility info
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M12x1.25 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
Important compatibility info
| Outer diameter | 257 mm |
| Number of Holes | 4 |
| Rotor Style | Vented |
| Brake Disc Thickness | 24 mm |
| Height | 45 mm |
| Minimum thickness | 22.4 mm |
| Centering Diameter | 69 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Number of Teeth | 24 |
| Hub Profile | 20.4 x 18.4 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
Important compatibility info
| Placement on Vehicle | Left Rear |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length 1 | 1677 mm |
| Length 2 | 1403 mm |
Important compatibility info
| Outer diameter 1 | 136 mm |
| Bearing Code | Gen 3 |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Length | 650 mm |
| External Teeth, Wheel Side | 24 |
| External Teeth, Diff.Side | 23 |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1221)
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Length | 825 mm |
Important compatibility info
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6419 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7351)
Important compatibility info
| Hub Profile | 25.9 x 23.1 |
| Outer diameter | 240 mm |
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
| Number of Teeth | 23 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6418 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7351)
Important compatibility info
| Rotor Style | Vented |
| Outer diameter | 350 mm |
| Minimum thickness | 29.5 mm |
| Centering Diameter | 67 mm |
| Brake Disc Thickness | 32.2 mm |
| Height | 54.7 mm |
| Number of Holes | 5 |
| Function | Brake Disc |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 3 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























