Important compatibility info
Function | Wheel Bearing Kit |
Outer diameter 1 | 154 mm |
Bearing Code | Gen 3 |
Placement on Vehicle | Front Axle |
Type | Wheel Bearing Kit |
Important compatibility info
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M20X1.5 |
Rod/Strut | Push Rod |
Pipe Diameter | 40 mm |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Length | 876 mm |
Important compatibility info
Length 1 | 1181 mm |
Function | Cable Pull, manual transmission |
Length 2 | 843 mm |
Length 3 | 1190 mm |
Type | Cable Pull, manual transmission |
Length 4 | 808 mm |
Important compatibility info
Distance of fastening bolts | 137 mm |
Function | Suspension Strut Support Mount |
Height | 61 mm |
Additional Information 2 | with bearing |
Type | Suspension Strut Support Mount |
Inner diameter | 13 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Paired article numbers | FSM5497 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA5705 |
Important compatibility info
Replaces | BKC1487 |
Length 1 | 800 mm |
Function | Cable Pull, manual transmission |
Number of Gears | for reverse gear |
Length 2 | 545 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Length | 190 mm |
Height | 115 mm |
Thickness | 62 mm |
Number of Holes | 2 |
Function | Suspension, propshaft |
for centre hole diameter of | 30 mm |
Type | Suspension, propshaft |
Important compatibility info
Placement on Vehicle | Left, Lower, Front |
Material | PE (Polyethylene) |
Colour | Black |
Inner diameter 1 | 56 mm |
Inner diameter 2 | 48 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Int. teeth, diff.side, conn.to transm. | 30 |
Type | Joint Kit, drive shaft |
Length | 174 mm |
Function | Joint Kit, drive shaft |
Seal Diameter | 50 mm |
External Teeth, Diff.Side | 32 |
Additional Information 2 | with groove |
Important compatibility info
Inner diameter 2 | 57 mm |
Inner diameter 1 | 57 mm |
Colour | Black |
Material | PE (Polyethylene) |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1109S)
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Length | 351 mm |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA5704 |
Placement on Vehicle | Front Axle Right, Upper |
Important compatibility info
Important compatibility info
Inner diameter | 10 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Width | 110 mm |
Type | Mounting, engine |
Length | 136 mm |
Placement on Vehicle | Rear, transmission sided |
Important compatibility info
Bearing Code | Gen 3 |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Outer diameter 1 | 160 mm |
Width 1 | 90 mm |
Outer diameter 2 | 89 mm |
Important compatibility info
Type | Drive Shaft |
External Teeth, Diff.Side | 25 |
External Teeth, Wheel Side | 24 |
Number of Teeth, ABS ring | 48 |
Length | 631 mm |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1177)
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6084 |
Important compatibility info
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | FCA6220 |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6131)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6132)
Important compatibility info
Function | Drive Shaft |
External Teeth, Diff.Side | 27 |
External Teeth, Wheel Side | 30 |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Length | 586 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1427)
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Wheel Bearing Kit |
Width 1 | 93 mm |
Outer diameter 1 | 140 mm |
Additional Information 2 | with integrated ABS sensor |
Type | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Important compatibility info
External Teeth, Wheel Side | 25 |
External Teeth, Diff.Side | 26 |
Length | 680 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1205)
Important compatibility info
Inner diameter 1 | 75 mm |
Function | Intake Hose, air filter |
Type | Intake Hose, air filter |
Inner diameter 2 | 55.5 mm |
Colour | Black |
Material | NBR (nitrile butadiene rubber) |
Important compatibility info
Inner diameter 2 | 43 mm |
Colour | Black |
Inner diameter 1 | 43 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | PE (Polyethylene) |
Type | Charge Air Hose |
Important compatibility info
Inner diameter 1 | 51 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 2 | 51 mm |
Colour | Black |
Type | Charge Air Hose |
Function | Charge Air Hose |
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Important compatibility info
Width | 38 mm |
Quantity Unit | Set |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Brake Disc Thickness | 26 mm |
Rotor Style | Vented |
Number of Holes | 7 |
Outer diameter | 278 mm |
Height | 43.2 mm |
Minimum thickness | 23 mm |
Centering Diameter | 70 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Type | Clutch Kit |
Hub Profile | 20.4 x 18.2 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Parts | 3 -part |
Number of Teeth | 24 |
Important compatibility info
Bearing Code | Gen 3 |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Outer diameter 1 | 152 mm |
Width 1 | 65 mm |
Outer diameter 2 | 87 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Manufacturer Restriction | Bosch |
Voltage | 12 V |
Rotation Direction | Clockwise rotation |
Rated Power | 1.4 kW |
Number of mounting bores | 3 |
Number of Thread Bores | 3 |
Function | Starter |
Type | Starter |
Number of Teeth | 10. 11. 12. 13 |
Important compatibility info
Placement on Vehicle | Front Axle |
Height | 47 mm |
Outer diameter | 292 mm |
Brake Disc Thickness | 25 mm |
Number of Holes | 5 |
Minimum thickness | 23 mm |
Centering Diameter | 64.2 mm |
Surface | Coated |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Vented |
Replaces | BBD6310 |
Number of mounting bores | 4 |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 21 mm |
Important compatibility info
Outer diameter | 365 mm |
Function | Brake Disc |
Centering Diameter | 79 mm |
Minimum thickness | 22.0 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Brake Disc Thickness | 25 mm |
Height | 48 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Brake Disc Thickness | 22 mm |
Outer diameter | 302 mm |
Height | 41 mm |
Minimum thickness | 20 mm |
Centering Diameter | 63.5 mm |
Function | Brake Disc |
Quantity Unit | Set |
Number of Holes | 5 |
Rotor Style | Vented |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Function | Brake Disc |
Minimum thickness | 22.6 mm |
Centering Diameter | 69 mm |
Outer diameter | 288 mm |
Brake Disc Thickness | 25 mm |
Height | 47 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Placement on Vehicle | Front Axle |
Type | Brake Disc Rotor |
Quantity Unit | Set |
Surface | Coated |
Number of mounting bores | 2 |
Important compatibility info
Function | Clutch Kit |
Number of Parts | 2 -part |
Hub Profile | 22 x 20.2 |
Type | Clutch Kit |
Number of Teeth | 26 |
Important compatibility info
Length | 924 mm |
External Teeth, Wheel Side | 26 |
External Teeth, Diff.Side | 33 |
Function | Drive Shaft |
Seal Diameter | 53.5 mm |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1228)
Important compatibility info
Inner diameter 2 | 38 mm |
Inner diameter 1 | 38 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Colour | Black |
Type | Charge Air Hose |
Placement on Vehicle | Rear, Right, Lower |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2001S)
Important compatibility info
Inner diameter 1 | 36 mm |
Inner diameter 2 | 51 mm |
Material | Silicone |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Colour | Orange |
Type | Charge Air Hose |
Important compatibility info
Function | Centre Rod Assembly |
Pipe Diameter | 36 mm |
Thread Measurement 2 | M20X1.5 |
Thread Measurement 1 | M30X1.5 RHT |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 988 mm |
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Length | 435 mm |
Thread Size | M22 |
Pipe Diameter | 36 mm |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Rear Axle |
Important compatibility info
Length | 720 mm |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M24X1.5 |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
Important compatibility info
Length | 1631 mm |
Pipe Diameter | 48 mm |
Type | Tie Rod |
Function | Tie Rod |
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 32 mm |
Quantity Unit | Set |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Important compatibility info
Placement on Vehicle | Front Axle |
Height | 43 mm |
Outer diameter | 281 mm |
Brake Disc Thickness | 26 mm |
Number of Holes | 5 |
Minimum thickness | 24 mm |
Centering Diameter | 59 mm |
Surface | Coated |
Number of mounting bores | 5 |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Vented |
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 295 mm |
Brake Disc Thickness | 26 mm |
Height | 49.3 mm |
Minimum thickness | 24 mm |
Centering Diameter | 62 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Function | Water Pump, engine cooling |
Housing Type | with housing |
Temperature range | 105 °C. 87 °C |
Water Pump Pulley Diameter | 50 mm |
Type | Water Pump, engine cooling |
Important compatibility info
Rotor Style | Vented |
Surface | Coated |
Number of Holes | 5 |
Outer diameter | 274 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 72 mm |
Minimum thickness | 22.2 mm |
Brake Disc Thickness | 24.2 mm |
Height | 47.5 mm |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Material | PE (Polyethylene) |
Inner diameter 1 | 52 mm |
Inner diameter 2 | 52 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Colour | Black |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023