Important compatibility info
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Length | 812 mm |
Important compatibility info
| Number of Teeth | 18 |
| Hub Profile | 20.8 x 18.4 |
| Outer diameter | 228 mm |
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Function | Water Pump, engine cooling |
| Housing material | Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | non-switchable water pump |
| Water pump impeller material | Metal |
Important compatibility info
| Number of Holes | 5 |
| Outer diameter | 300 mm |
| Brake Disc Thickness | 25 mm |
| Height | 48.5 mm |
| Rotor Style | Vented |
| Minimum thickness | 23 mm |
| Centering Diameter | 72 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 3 |
Important compatibility info
| Type | Centre Rod Assembly |
| Thread Measurement 2 | M18X1.5 |
| Rod/Strut | Push Rod |
| Length | 725 mm |
| Function | Centre Rod Assembly |
| Pipe Diameter | 36 mm |
| Thread Measurement 1 | M30X1.5 RTH |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Length | 793 mm |
| Rod/Strut | Push Rod |
Important compatibility info
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7328 |
Important compatibility info
| Hub Profile | 21.9 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Number of Teeth | 26 |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6302 |
Important compatibility info
| Number of Gears | for forwards gear |
| Length 1 | 1055 mm |
| Function | Cable Pull, manual transmission |
| Length 2 | 793 mm |
| Length 3 | 1055 mm |
| Length 4 | 725 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Number of Gears | for reverse gear |
| Length 1 | 1070 mm |
| Function | Cable Pull, manual transmission |
| Length 4 | 790 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Type | Tie Rod End |
| Cone Size | 28.6 mm |
| Length | 168 mm |
| Thread Measurement 1 | M52X1.5 |
| Thread Measurement 2 | M20X1.5 |
| Thread Type | with left-hand thread |
| Function | Tie Rod End |
Important compatibility info
| Length | 853 mm |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
Important compatibility info
| Placement on Vehicle | Front |
| Voltage | 12 V |
| Type | Wiper Motor |
| Function | Wiper Motor |
| Additional Information | without rod assembly |
Important compatibility info
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6303 |
Important compatibility info
| Inner diameter 1 | 56 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Width 1 | 73 mm |
| Outer diameter 1 | 136 mm |
| Bearing Code | Gen 3 |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Connector Shape | Rectangular |
| Function | Auxiliary water pump (cooling water circuit) |
| Port / Connector type | 2 PIN |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
Important compatibility info
| Number of Teeth | 21 |
| Hub Profile | 24.1 x 21.4 |
| Outer diameter | 225 mm |
| Engine Version | for engines with dual-mass flywheel |
| Clutch Equipment | Pull Type Clutch |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Parts | 3 -part |
Important compatibility info
| Inner diameter 2 | 37 mm |
| Material | PE (Polyethylene) |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Colour | Black |
| Inner diameter 1 | 37 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1005S)
Important compatibility info
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 4 |
| Outer diameter | 246 mm |
| Brake Disc Thickness | 20 mm |
| Height | 50 mm |
| Minimum thickness | 18 mm |
| Centering Diameter | 60 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 3 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















