Important compatibility info
| Material | PA (polyamide) |
| Cooling Hose | from engine to thermostat |
| Type | Coolant Pipe |
| Function | Coolant Pipe |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
| Length | 420 mm |
| Height | 3.6 mm |
| Width | 163 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 14.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate |
| Length | 111.8 mm |
| Placement on Vehicle | Rear Axle |
| Width | 43.8 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 51810285 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 156 mm |
| Thickness | 11 mm |
| Inner diameter | 93 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Transverse |
| Number of mounting bores | 4 |
| Mounting points diameter | 8.2 mm. 10.7 mm |
| Function | Selector-/Shift Rod |
| for OE number | 1 472 771 |
| Type | Selector-/Shift Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear, Left Rear |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
| Length | 1846 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 7 |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Track rollers material | Plastic |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 75 mm |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Colour | Yellow |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 652 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 50 mm |
| Width of castor bearing surface | 26 mm |
| for OE number | 16 138 384 80 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.3 mm |
| Width | 68.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wire Diameter | 11.5 mm |
| Placement on Vehicle | Rear Axle |
| Length | 357 mm |
| Outer diameter | 111 mm. 79 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1070 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1549 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 1519 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170526 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Width | 113 mm |
| Length | 170 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (175539)
- 2x Febi Rubber Buffer, suspension (109589)
Important compatibility info
| Type | Cable Pull, parking brake |
| Length | 1774 mm |
| Placement on Vehicle | Rear |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, differential |
| Inner diameter | 14.9 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 66 mm |
| Outer diameter | 75.5 mm |
| Material | Rubber/Metal |
| Function | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Length | 114.2 mm |
| Width | 73 mm |
| Thickness/Strength 1 | 15.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Right Rear |
| Type | Mounting, engine |
| for OE number | 1H0 199 262 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 124.6 mm |
| Width | 70.6 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Teeth | 18 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 25.8 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 197 mm |
| Material | Steel |
| Outer diameter | 9 mm |
| Additional Information | with nuts |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Material | Plastic |
| Paired article numbers | 24885 |
| Colour | Black |
| Function | Exterior Door Handle |
| Type | Exterior Door Handle |
| Lock System | without lock barrel, without lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Joint Type | Tripod Joint |
| Inner diameter 2 | 61 mm |
| Inner diameter 1 | 22 mm |
| Material | Thermoplast |
| Length | 104 mm |
| Placement on Vehicle | transmission sided, Front Axle |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Bellow Kit, drive shaft (176045)
Important compatibility info
| Length | 280 mm |
| Width | 25 mm |
| Refrigerant | R 1234yf, R 134a |
| Type | Dryer, air conditioning |
| Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with axle nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 45 mm |
| Outer diameter | 82 mm |
| Inner diameter | 43 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (176553)
Important compatibility info
| Inner diameter | 10 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Thickness | 32 mm |
| Material | Cast Aluminium |
| Length | 170 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with bolts/screws, with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (39895)
- 1x Febi Screw (37265)
- 1x Febi Screw (38298)
- 1x Febi Nut (22263)
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Teeth | 23 |
| Number of Wings | 8 |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Glow Plug |
| Voltage | 11 V |
| Type | Glow Plug |
| Spanner Size | 10 |
| External Thread Size | M10 x 1 |
| Length | 109 mm |
| Fitting Depth | 30 mm |
| Glow Plug Type | Metal glow plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M10x1,5 |
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 23 |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Type | Pressure Switch, air conditioning |
| Function | Pressure Switch, air conditioning |
| Internal Thread Size | 3/8" - 24 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Opening Temperature | 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wheel Bearing |
| Placement on Vehicle | Front Axle Left, inner, Front Axle Right |
| Outer diameter | 95 mm |
| Inner diameter | 55 mm |
| Type | Wheel Bearing |
| Width | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 47 mm |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 33 mm |
| Outer diameter 1 | 26 mm |
| Outer diameter 2 | 41 mm |
| Cooling Hose | from expansion tank to waterpump |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Inner diameter 3 | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 20 mm |
| Outer diameter | 160 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3.3 mm |
| Function | Brake Shoe Set, parking brake |
| Type | Brake Shoe Set, parking brake |
| for OE number | 34 41 6 761 290 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 148 mm |
| Width | 61.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Manufacturer | CHEVROLET OPEL VAUXHALL |
| Model | ASTRA CRUZE MOKKA ORLANDO TRAX ZAFIRA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 1940 mm |
| Paired article numbers | 103768 |
| Number of Connectors / Ports | 2 |
| Resistance | 1700 Ohm |
| Cable Length | 1910 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (21357)
- 1x Febi Link/Coupling Rod, stabiliser bar (21358)
- 2x Febi Screw (22248)
- 4x Febi Nut (06877)
Important compatibility info
| Function | Multiport Valve |
| Type | Multiport Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 1 | 41 mm |
| Width | 20 mm |
| Type | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Outer diameter | 78 mm |
| Inner diameter | 45 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width 1 | 18 mm |
| Outer diameter 1 | 68 mm |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Additional Information 2 | without lid |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 28 mm |
| Material | Plastic |
| Outer diameter | 46 mm |
| Inner diameter | 10 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 253 mm |
| Thickness | 33 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.9 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Function | Brake Disc |
| Replaces | 19334 |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of mounting bores | 3 |
| Function | Central Slave Cylinder, clutch |
| Replaces | 34935; 36304; 40957 |
| Type | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 665 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































