Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 2000 mm |
| Function | Speedometer Cable |
| Driver Position | for right-hand drive vehicles |
| Type | Speedometer Cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Material | Metal |
| Thickness | 1.57 mm |
| Notches / Holes Number | 2 |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Function | Shaft Seal, wheel hub |
| Width | 30 mm. 32 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 192.5 mm |
| Inner diameter | 168 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
| Function | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (18201)
- 1x Febi Seal Ring, wheel hub (09827)
- 1x Febi Shaft Seal, wheel bearing (18200)
- 4x Febi Seal Ring, wheel hub (02191)
- 2x Febi Circlip, brake anchor pin (04767)
- 1x Febi Washer (10405)
£28.31
Important compatibility info
| Length | 2475 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Shaft Seal, differential |
| Sealing lip material | FPM (fluoride rubber) |
| Type | Shaft Seal, differential |
| Outer diameter 1 | 135 mm |
| Inner diameter | 80 mm |
| Thickness | 18 mm |
| Outer diameter | 154 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | BP4N-39-070D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Paired article numbers | 106304 |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (180183)
- 2x Febi Rubber Buffer, suspension (180339)
£28.31
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.32
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | transmission sided, Rear |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.32
Important compatibility info
| Height | 232 mm |
| Outer diameter | 108 mm |
| Filter type | Spin-on Filter |
| Seal Diameter | 103 mm |
| Function | Fuel filter |
| Internal Thread Size | 1/1" - 14 UNS |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.32
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 353 mm |
| Paired article numbers | 196829 |
| Type | Brake Hose |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.32
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 197147 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.32
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 184.6 mm |
| Width | 66.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.33
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Length | 147.5 mm |
| Width | 52.5 mm |
| Inspection Tag | ECE R90 Approval |
| Placement on Vehicle | Rear Axle |
| Wear Warning Contact | with acoustic wear warning |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.33
Important compatibility info
| Function | Tie Rod End |
| Length | 142 mm |
| Placement on Vehicle | Front Axle |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.34
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 164 mm |
| Outer diameter | 75 mm |
| Steering arm type | for trailing arm |
| Mounting points diameter | 19 mm |
| Function | Repair Kit, control/trailing arm |
| Type | Repair Kit, control/trailing arm |
| for OE number | 85.43220.6002 |
| Additional Information 2 | with retaining ring, with spacer disc |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.34
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 240 mm |
| Thickness | 41.1 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.35
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Linkage Damper, injection system |
| Type | Linkage Damper, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.35
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.5 mm |
| Brake System | Lucas |
| Inspection Tag | ECE R90 Approved |
| Length | 116.5 mm |
| Width | 50 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.35
Important compatibility info
| Additional Information | with bush |
| Number of Connectors / Ports | 2 |
| Cable Length | 2785 mm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Resistance | 1185 Ohm |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.35
Important compatibility info
| Paired article numbers | 39042 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (19935)
- 1x Febi Tie Rod End (10660)
- 1x Febi Bellow, steering (29206)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi Molybdenum Grease (02582)
£28.36
Important compatibility info
| Placement on Vehicle | Lower Front Axle, both sides |
| Extra Description | ProKit |
| Function | Mounting, control/trailing arm |
| Inner diameter | 14 mm |
| Thickness | 38 mm |
| Outer diameter | 44 mm. 38 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Camber Correction Screw (01659)
- 4x Febi Mounting, control/trailing arm (01686)
- 2x Febi Nut (01688)
£28.37
Important compatibility info
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.37
Important compatibility info
| Placement on Vehicle | at steering arm |
| Length | 80 mm |
| Additional Information | with lock nut |
| Spanner Size | 41 |
| Cone Size | 32.2 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.37
Important compatibility info
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Number of Teeth | 26 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.38
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 434 mm |
| Paired article numbers | 37206 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (36911)
- 1x Febi Inner Tie Rod (37203)
£28.38
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| External Teeth, Wheel Side | 26 |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.38
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 434 mm |
| Paired article numbers | 37205 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (36910)
- 1x Febi Inner Tie Rod (37203)
£28.38
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023