Important compatibility info
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 825 mm |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 24 mm |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Thermostat, coolant |
Housing material | Plastic |
Housing Type | with housing |
Opening Temperature | 103 °C |
Additional Information 2 | with sensor |
Type | Thermostat, coolant |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6949 |
Important compatibility info
Function | Wheel Bearing Kit |
Width 1 | 82 mm |
Outer diameter 1 | 120 mm |
Inner diameter 1 | 25 mm |
Bearing Code | Gen 3 |
Placement on Vehicle | Rear Axle |
Type | Wheel Bearing Kit |
Important compatibility info
Function | Cable Pull, manual transmission |
Length 2 | 760 mm |
Type | Cable Pull, manual transmission |
Length 1 | 1045 mm |
Length 4 | 713 mm |
Length 3 | 994 mm |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 24 mm |
Important compatibility info
Function | Cable Pull, manual transmission |
Length 1 | 715 mm |
Length 4 | 914 mm |
Length 3 | 1079 mm |
Length 2 | 709 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Function | Drive Shaft |
Placement on Vehicle | Front Axle Right |
External Teeth, Diff.Side | 24 |
External Teeth, Wheel Side | 28 |
Length | 958 mm |
Type | Drive Shaft |
Important compatibility info
Function | Cable Pull, manual transmission |
Length 1 | 758 mm |
Length 4 | 987 mm |
Length 3 | 1084 mm |
Length 2 | 717 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Length | 150 mm |
Thread Type | with external thread |
Thread Size | M10x1 |
Placement on Vehicle | Rear Axle, Right, outer |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7640 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5735)
- 1x Borg & Beck Mounting, control/trailing arm (BSK8155)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7330 |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7884)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7329 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7885)
Important compatibility info
Water Pump Pulley Diameter | 74 mm |
Impeller Diameter | 72 mm |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Important compatibility info
Replaces | BWK1096 |
Bearing Code | Gen 1 |
Inner diameter 1 | 54 mm |
Outer diameter 1 | 96 mm |
Width 1 | 51 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6950 |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Length | 634 mm |
External Teeth, Wheel Side | 25 |
Type | Drive Shaft |
External Teeth, Diff.Side | 24 |
Placement on Vehicle | Front Axle Left |
Function | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1208)
Important compatibility info
Type | Clutch Kit |
Hub Profile | 18.7 x 16.6 |
Outer diameter | 215 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Replaces | HK2502; HK2329 |
Number of Parts | 2 -part |
Number of Teeth | 22 |
Important compatibility info
Valve type | Flow Restriction Valve |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Operating Mode | Vacuum-controlled |
Important compatibility info
Type | Brake Disc Rotor |
Outer diameter | 305 mm |
Brake Disc Thickness | 28 mm |
Height | 51 mm |
Quantity Unit | Set |
Rotor Style | Vented |
Placement on Vehicle | Front Axle |
Function | Brake Disc |
Centering Diameter | 67 mm |
Minimum thickness | 25.4 mm |
Number of Holes | 5 |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 25 mm |
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Brake Disc |
Centering Diameter | 30 mm |
Minimum thickness | 9.5 mm |
Outer diameter | 290 mm |
Number of Holes | 5 |
Additional Information 2 | with groove, with ABS sensor ring, with wheel bearing |
Height | 90.2 mm |
Type | Brake Disc Rotor |
Rotor Style | Solid |
Brake Disc Thickness | 11 mm |
Quantity | 1 |
Surface | Coated |
Important compatibility info
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Replaced by | BWP2242 |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 6 |
Outer diameter | 285 mm |
Brake Disc Thickness | 22 mm |
Height | 93 mm |
Minimum thickness | 19 mm |
Centering Diameter | 120 mm |
Function | Brake Disc |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Rear Axle |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Thermostat, coolant |
Housing material | Plastic |
Housing Type | with housing |
Opening Temperature | 87 °C |
Type | Thermostat, coolant |
Important compatibility info
Rotor Style | Vented |
Outer diameter | 308 mm |
Number of Holes | 5 |
Brake Disc Thickness | 29.5 mm |
Height | 55.5 mm |
Minimum thickness | 27 mm |
Centering Diameter | 76 mm |
Function | Brake Disc |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Front Axle |
Replaces | BBD6137S |
Number of mounting bores | 1 |
Important compatibility info
Surface | Coated |
Number of Holes | 5 |
Outer diameter | 300 mm |
Brake Disc Thickness | 32 mm |
Height | 73.5 mm |
Minimum thickness | 30 mm |
Centering Diameter | 80 mm |
Function | Brake Disc |
Placement on Vehicle | Front Axle |
Type | Brake Disc Rotor |
Rotor Style | Vented |
Quantity | 1 |
Number of mounting bores | 2 |
Important compatibility info
Bearing Code | Gen 0 |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Type | Wheel Bearing Kit |
Important compatibility info
Material | Silicone |
Inner diameter 1 | 55 mm |
Inner diameter 2 | 55 mm |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Number of Teeth | 21 |
Number of Parts | 2 -part |
Hub Profile | 24.6 x 21.2 |
Outer diameter | 238 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Important compatibility info
Outer diameter | 216 mm |
Number of Teeth | 26 |
Hub Profile | 21.8 x 20 |
Type | Clutch Kit |
Function | Clutch Kit |
Number of Parts | 2 -part |
Replaced by | HK7787 |
Important compatibility info
Number of Holes | 6 |
Outer diameter | 296 mm |
Rotor Style | Solid |
Brake Disc Thickness | 16 mm |
Height | 70 mm |
Minimum thickness | 13 mm |
Centering Diameter | 76 mm |
Function | Brake Disc |
Quantity Unit | Set |
Placement on Vehicle | Rear Axle |
Surface | Coated |
Type | Brake Disc Rotor |
Number of mounting bores | 1 |
Important compatibility info
Rotor Style | Vented |
Surface | Coated |
Number of Holes | 5 |
Outer diameter | 295 mm |
Brake Disc Thickness | 28 mm |
Height | 54.5 mm |
Minimum thickness | 25.5 mm |
Centering Diameter | 67 mm |
Function | Brake Disc |
Quantity Unit | Set |
Placement on Vehicle | Front Axle |
Type | Brake Disc Rotor |
Number of mounting bores | 1 |
Important compatibility info
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M20X1.5 |
Length | 837 mm |
Pipe Diameter | 40 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Important compatibility info
Thread Measurement 1 | M30X1.5 RHT |
Length | 501 mm |
Thread Measurement 2 | M24X1.5 |
Rod/Strut | Push Rod |
Pipe Diameter | 40 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Important compatibility info
Function | Centre Rod Assembly |
Thread Measurement 2 | M30X1.5 |
Pipe Diameter | 52 mm |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 1008 mm |
Thread Measurement 1 | M24X1.5 |
Important compatibility info
Length | 871 mm |
Type | Centre Rod Assembly |
Thread Measurement 1 | M20X1.5 |
Thread Measurement 2 | M30X1.5 |
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Pipe Diameter | 42 mm |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 300 mm |
Brake Disc Thickness | 20 mm |
Height | 76 mm |
Minimum thickness | 18 mm |
Centering Diameter | 75 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Bearing Code | Gen 3 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 136 mm |
Width 1 | 47 mm |
Additional Information 2 | with integrated ABS sensor |
Number of Teeth, ABS ring | 96 |
Thread Size | M14X1,5 |
Outer diameter 2 | 84.5 mm |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Important compatibility info
Rotor Style | Vented |
Surface | Coated |
Outer diameter | 313 mm |
Number of Holes | 5 |
Brake Disc Thickness | 25 mm |
Height | 59.8 mm |
Minimum thickness | 23 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Number of mounting bores | 1 |
Placement on Vehicle | Front Axle |
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Rear |
Steering arm type | Control Arm |
Paired article numbers | FCA7853 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8175)
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 21 mm |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 21 mm |
Important compatibility info
Placement on Vehicle | Front Axle |
Surface | Coated |
Rotor Style | Vented |
Outer diameter | 283 mm |
Number of Holes | 5 |
Brake Disc Thickness | 25 mm |
Height | 48.6 mm |
Minimum thickness | 23 mm |
Centering Diameter | 72 mm |
Function | Brake Disc |
Quantity Unit | Set |
Number of mounting bores | 3 |
Type | Brake Disc Rotor |
Important compatibility info
Placement on Vehicle | Front Axle |
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 317 mm |
Brake Disc Thickness | 30 mm |
Height | 62 mm |
Minimum thickness | 27 mm |
Centering Diameter | 79 mm |
Function | Brake Disc |
Type | Brake Disc Rotor |
Quantity | 1 |
Number of mounting bores | 1 |
Important compatibility info
Rotor Style | Vented |
Outer diameter | 315 mm |
Minimum thickness | 21 mm |
Centering Diameter | 70.5 mm |
Brake Disc Thickness | 23 mm |
Height | 42.7 mm |
Number of Holes | 5 |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Inner diameter 2 | 51 mm |
Colour | Black |
Inner diameter 1 | 51 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Type | Charge Air Hose |
Important compatibility info
Outer diameter | 330 mm |
Brake Disc Thickness | 26 mm |
Height | 58 mm |
Number of Holes | 5 |
Minimum thickness | 23.5 mm |
Centering Diameter | 67 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Rotor Style | Vented |
Number of mounting bores | 1 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023