Important compatibility info
Rotor Style | Vented |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 58 mm |
Minimum thickness | 18.0 mm |
Outer diameter | 316 mm |
Height | 63.4 mm |
Number of Holes | 5 |
Type | Brake Disc Rotor |
Brake Disc Thickness | 20 mm |
Surface | Coated |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 3 |
Important compatibility info
Number of Teeth | 24 |
Hub Profile | 20.4 x 18.2 |
Outer diameter | 215 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Parts | 3 -part |
Replaced by | HK2072 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7501 |
Placement on Vehicle | Front Axle Right, Upper |
Important compatibility info
Length | 783 mm |
Rod/Strut | Push Rod |
Thread Measurement 2 | M20X1.5 |
Thread Measurement 1 | M30X1.5 RHT |
for OE number | 6764601905 |
Pipe Diameter | 42 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Important compatibility info
Length | 975 mm |
Rod/Strut | Push Rod |
Pipe Diameter | 36 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M20X1.5 |
Important compatibility info
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 873 mm |
Important compatibility info
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Pipe Diameter | 36 mm |
Thread Measurement 2 | M20X1.5 |
Thread Measurement 1 | M28X1.5 RHT |
Length | 895 mm |
Type | Centre Rod Assembly |
Important compatibility info
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Pipe Diameter | 40 mm |
Thread Measurement 1 | M28X1.5 RHT |
Length | 902 mm |
Type | Centre Rod Assembly |
Thread Measurement 2 | M18X1.5 |
Important compatibility info
Voltage | 12 V |
Rotation Direction | Clockwise rotation |
Rated Power | 1.4 kW |
Number of mounting bores | 3 |
Number of Thread Bores | 3 |
Function | Starter |
Type | Starter |
Number of Teeth | 11. 9 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7175 |
Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7174 |
Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
Pipe Diameter | 42 mm |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Length | 865 mm |
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M24X1.5 |
Important compatibility info
Function | Centre Rod Assembly |
Pipe Diameter | 38 mm |
Thread Measurement 2 | M24X1.5 |
Length | 435 mm |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Thread Measurement 1 | M30X1.5 |
Important compatibility info
Thread Measurement 2 | M30X1.5 |
Function | Centre Rod Assembly |
Pipe Diameter | 42 mm |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 870 mm |
Thread Measurement 1 | M24X1.5 |
Important compatibility info
Length | 958 mm |
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M24X1.5 |
Rod/Strut | Push Rod |
Pipe Diameter | 38 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Important compatibility info
Rod/Strut | Push Rod |
Pipe Diameter | 40 mm |
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M20X1.5 |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Length | 902 mm |
Important compatibility info
Material | PE (Polyethylene) |
Inner diameter 1 | 39 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Colour | Black |
Type | Charge Air Hose |
Inner diameter 2 | 39 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1001S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1104S)
Important compatibility info
Function | Charge Air Hose |
Material | ACM (Polyacrylate) |
Inner diameter 1 | 48 mm |
Colour | Black |
Inner diameter 2 | 58 mm |
Type | Charge Air Hose |
Important compatibility info
Length | 616 mm |
External Teeth, Wheel Side | 28 |
External Teeth, Diff.Side | 29 |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1511)
Important compatibility info
Function | Thermostat, coolant |
Housing material | Aluminium |
Housing Type | with housing |
Additional Information | with gaskets/seals |
Opening Temperature | 87 °C |
Type | Thermostat, coolant |
Important compatibility info
Opening Temperature | 92 °C |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Housing material | Aluminium |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | FCA7552 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5444)
Important compatibility info
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 1 | 51 mm |
Colour | Black |
Inner diameter 2 | 51 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2004S)
Important compatibility info
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7551 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5444)
Important compatibility info
Function | Auxiliary water pump (cooling water circuit) |
Port / Connector type | 2 PIN |
Replaces | BWP3007 |
Type | Auxiliary water pump (cooling water circuit) |
Voltage | 12 V |
Connector Shape | D Shape |
Important compatibility info
Function | Cable Pull, manual transmission |
Length 1 | 1177 mm |
Number of Gears | for forwards gear |
Length 2 | 926 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 1 | 56 mm |
Inner diameter 2 | 56 mm |
Colour | Black |
Port / Connector type | HORSE SHOE CLIP |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Colour | Black |
Inner diameter 2 | 54 mm |
Inner diameter 1 | 54 mm |
Port / Connector type | HORSE SHOE CLIP |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Function | Cable Pull, manual transmission |
Length 1 | 1073 mm |
Length 4 | 830 mm |
Length 2 | 830 mm |
Length 3 | 1063 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Inner diameter 2 | 51 mm |
Colour | Black |
Inner diameter 1 | 51 mm |
Material | Silicone |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6342 |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Function | Cable Pull, manual transmission |
Length 1 | 1405 mm |
Length 2 | 1032 mm |
Number of Gears | for reverse gear |
Type | Cable Pull, manual transmission |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Height | 49 mm |
Outer diameter | 325 mm |
Brake Disc Thickness | 25 mm |
Quantity Unit | Set |
Minimum thickness | 23 mm |
Centering Diameter | 79 mm |
Type | Brake Disc Rotor |
Function | Brake Disc |
Number of mounting bores | 1 |
Surface | Coated |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7567 |
Placement on Vehicle | Front Axle Right, Lower, Front |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6999)
Important compatibility info
External Teeth, Wheel Side | 29 |
Length | 639 mm |
External Teeth, Diff.Side | 29 |
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Function | Drive Shaft |
Number of Teeth, ABS ring | 48 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1444)
Important compatibility info
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7573 |
Version | With fittings(ex.KP) |
Important compatibility info
Type | Cable Pull, manual transmission |
Length 1 | 743 mm |
Length 2 | 1044 mm |
Length 3 | 747 mm |
Length 4 | 1076 mm |
Function | Cable Pull, manual transmission |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |
Function | Drive Shaft |
External Teeth, Diff.Side | 29 |
External Teeth, Wheel Side | 30 |
Length | 557 mm |
Important compatibility info
Function | Wheel Bearing Kit |
Width 1 | 53.5 mm |
Additional Information 2 | with integrated ABS sensor |
Outer diameter 2 | 92 mm |
Number of Teeth, ABS ring | 48 |
Outer diameter 1 | 150 mm |
Type | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Placement on Vehicle | Left, transmission sided |
Important compatibility info
Material | Aluminium |
Function | Oil sump |
Type | Oil sump |
Additional Information 2 | with bore for oil-level sensor |
Important compatibility info
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Height | 48 mm |
Centering Diameter | 58 mm |
Minimum thickness | 22 mm |
Surface | Coated |
Function | Brake Disc |
Brake Disc Thickness | 24 mm |
Number of Holes | 5 |
Outer diameter | 294 mm |
Rotor Style | Vented |
Number of mounting bores | 2 |
Important compatibility info
Outer diameter | 281 mm |
Rotor Style | Vented |
Number of Holes | 5 |
Brake Disc Thickness | 28 mm |
Height | 38 mm |
Minimum thickness | 25.3 mm |
Centering Diameter | 73.5 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Important compatibility info
Length 1 | 769 mm |
Length 2 | 1030 mm |
Length 3 | 837 mm |
Length 4 | 1113 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Length 1 | 790 mm |
Length 2 | 1046 mm |
Length 3 | 870 mm |
Length 4 | 1143 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Length 1 | 793 mm |
Length 2 | 1048 mm |
Length 3 | 872 mm |
Length 4 | 1146 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Surface | Coated |
Outer diameter | 320 mm |
Function | Brake Disc |
Centering Diameter | 67 mm |
Minimum thickness | 21.4 mm |
Number of Holes | 5 |
Brake Disc Thickness | 24 mm |
Height | 68.2 mm |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Number of mounting bores | 3 |
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 304 mm |
Minimum thickness | 26 mm |
Centering Diameter | 71 mm |
Brake Disc Thickness | 28 mm |
Height | 48.5 mm |
Function | Brake Disc |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Front Axle |
Important compatibility info
Length 1 | 901 mm |
Length 2 | 1264 mm |
Length 3 | 978 mm |
Length 4 | 1275 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Length 1 | 629 mm |
Length 2 | 992 mm |
Length 3 | 787 mm |
Length 4 | 1085 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023