Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Resistance | 1150 Ohm |
| Cable Length | 2690 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.81
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Replaces | 17013 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.81
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 332 mm |
| Paired article numbers | 44286 |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44283)
- 1x Febi Tie Rod End (44281)
£30.82
Important compatibility info
| Inner diameter | 69 mm |
| Wall Thickness | 4 mm |
| Additional Information 2 | with clamps |
| Hose Length | 140 mm |
| Material | NBR (nitrile butadiene rubber) |
| Type | Intake Hose, air filter |
| Function | Intake Hose, air filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Intake Hose, air filter (172076)
- 2x Febi Hose Clamp (48354)
£30.82
Important compatibility info
| Material | Steel |
| Switch point from | 0.1 bar |
| Switch point to | 0.5 bar |
| Operating Mode | Hydraulic, Pneumatic |
| Spanner Size | 27 |
| Control Type | Push Actuation |
| Thread Length | 9 mm |
| Number of Connectors / Ports | 2 |
| Function | Pressure Switch |
| External Thread Size | M16 x 1,5 |
| Type | Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.82
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 129.9 mm |
| Width | 81.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.82
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 239 mm |
| Thickness | 43.5 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.83
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 190 mm |
| Thickness | 380 mm |
| Inner diameter | 131 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.83
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.83
Important compatibility info
| Placement on Vehicle | Lower |
| Material | AEM (Ethylene Acrylate Rubber) |
| Type | Charge Air Hose |
| Hose Length | 250 mm |
| Wall Thickness | 5 mm |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.83
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Aluminium |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Replaces | 37413 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.83
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.83
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 540 mm |
| Additional Information | with rubber-metal mounts |
| Type | Rod/Strut, wheel suspension |
| Rod/Strut | Push Rod |
| Function | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.84
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm. 156.5 mm |
| Width | 75.3 mm. 74.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.7 mm. 18.4 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.84
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40744 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (31032)
- 1x Febi Nut (22263)
- 1x Febi Bolt, control arm (39749)
- 1x Febi Nut (32615)
- 1x Febi Washer (39748)
- 1x Febi Screw (21478)
- 1x Febi Nut (24799)
- 1x Febi Screw (24796)
- 1x Febi Nut (14392)
- 1x Febi Control/Trailing Arm, wheel suspension (31331)
£30.84
Important compatibility info
| Width of castor bearing surface | 19 mm |
| Outer diameter | 59 mm |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
| Width | 30.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.85
Important compatibility info
| Paired article numbers | 176646 |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1150 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.85
Important compatibility info
| Length | 1257 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Number of Ribs | 7 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Chemical Properties | Elastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.85
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Bore Diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.85
Important compatibility info
| Height | 207 mm |
| Outer diameter | 94 mm |
| Inner diameter | 23 mm |
| Type | Filter, crankcase ventilation |
| Function | Filter, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.85
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023