Important compatibility info
| Version | Fitting Kit |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6077 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6911 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7330 |
| Placement on Vehicle | Front Axle Left, Lower |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7884)
Important compatibility info
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 96 mm |
| Inner diameter | 50 mm |
| Thickness | 32 mm |
| Outer diameter | 132 mm |
| Type | Joint, propshaft |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1405 mm |
| Length 2 | 1032 mm |
| Number of Gears | for reverse gear |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1177 mm |
| Number of Gears | for forwards gear |
| Length 2 | 926 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Charge Air Hose |
| Outer diameter 2 | 53 mm |
| Outer diameter 1 | 56 mm |
| Port / Connector type | OE PUSH CONNECTOR |
| Type | Charge Air Hose |
| Material | AEM (Ethylene Acrylate Rubber) |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2001S)
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Length | 22 mm |
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Length | 24 mm |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1398 mm |
| Length 4 | 1016 mm |
| Length 3 | 1398 mm |
| Length 2 | 910 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Number of Teeth, ABS ring | 45 |
| Diameter 2 | 124 mm |
| External Teeth, Wheel Side | 38 |
| Length | 522 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1173)
Important compatibility info
| Replaces | BDS1205 |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 38 |
| Length | 593 mm |
| Function | Drive Shaft |
| Number of Teeth, ABS ring | 45 |
| Diameter 2 | 124 mm |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1173)
Important compatibility info
| Length | 877 mm |
| External Teeth, Wheel Side | 24 |
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
| Number of Teeth, ABS ring | 48 |
| External Teeth, Diff.Side | 23 |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1495)
Important compatibility info
| Length | 898 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 23 |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1477)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6771 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6910 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 2 |
| Surface | Coated |
| Rotor Style | Vented |
| Outer diameter | 280 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 68.7 mm |
| Minimum thickness | 21 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 23 mm |
| Height | 44.4 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 288 mm |
| Function | Brake Disc |
| Centering Diameter | 93.1 mm |
| Minimum thickness | 30 mm |
| Brake Disc Thickness | 33 mm |
| Height | 55.5 mm |
| Number of Holes | 5 |
| Type | Brake Disc Rotor |
| Rotor Style | Vented |
| Quantity | 1 |
| Surface | Coated |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Number of mounting bores | 3 |
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Outer diameter | 304 mm |
| Minimum thickness | 26 mm |
| Centering Diameter | 71 mm |
| Brake Disc Thickness | 28 mm |
| Height | 48.5 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Water pump impeller material | Plastic |
| Water Pump Pulley Diameter | 98 mm |
| Impeller Diameter | 62 mm |
| Number of Ribs | 7 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of Holes | 5 |
| Outer diameter | 321 mm |
| Brake Disc Thickness | 30 mm |
| Height | 51 mm |
| Rotor Style | Vented |
| Minimum thickness | 28 mm |
| Centering Diameter | 67.5 mm |
| Function | Brake Disc |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Number of mounting bores | 1 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 322 mm |
| Function | Brake Disc |
| Centering Diameter | 63.6 mm |
| Minimum thickness | 25.5 mm |
| Brake Disc Thickness | 28 mm |
| Height | 48 mm |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
| Number of mounting bores | 1 |
Important compatibility info
| Length | 611 mm |
| Function | Drive Shaft |
| Diameter 2 | 94 mm |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 27 |
| Number of Teeth, ABS ring | 48 |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Function | Drive Shaft |
| Diameter 2 | 94 mm |
| Length | 664 mm |
| External Teeth, Wheel Side | 27 |
| Number of Teeth, ABS ring | 48 |
| Type | Drive Shaft |
Important compatibility info
| Additional Information | with gaskets/seals |
| Opening Temperature | 95 °C |
| Housing Type | with housing |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
| Function | Oil sump |
| Material | Plastic |
| Type | Oil sump |
| Additional Information 2 | with bore for oil-level sensor |
Important compatibility info
| Number of Teeth | 17 |
| Hub Profile | 19.7 x 17 |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Function | Centre Rod Assembly |
| Length | 870 mm |
| Thread Measurement 1 | M30X1.5 RHT |
| Thread Measurement 2 | M24X1.5 |
| Rod/Strut | Push Rod |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 68 mm |
| Minimum thickness | 23.0 mm |
| Outer diameter | 280 mm |
| Height | 51.5 mm |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 25 mm |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
| Type | Water Pump, engine cooling |
Important compatibility info
| Number of Parts | 2 -part |
| Hub Profile | 22.3 x 20.3 |
| Outer diameter | 218 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 28 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7431 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Number of Holes | 5 |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
| Height | 54.1 mm |
| Outer diameter | 330 mm |
| Brake Disc Thickness | 14 mm |
| Minimum thickness | 12.3 mm |
| Centering Diameter | 67 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Number of mounting bores | 1 |
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Number of Holes | 5 |
| Outer diameter | 312 mm |
| Rotor Style | Vented |
| Brake Disc Thickness | 28 mm |
| Height | 63 mm |
| Minimum thickness | 26 mm |
| Centering Diameter | 61 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 348 mm |
| Brake Disc Thickness | 30 mm |
| Height | 62.3 mm |
| Minimum thickness | 28.5 mm |
| Centering Diameter | 75 mm |
| Function | Brake Disc |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rotor Style | Vented |
| Brake Disc Thickness | 24 mm |
| Outer diameter | 300 mm |
| Minimum thickness | 22 mm |
| Centering Diameter | 61 mm |
| Number of Holes | 5 |
| Height | 44 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
| Minimum thickness | 28.4 mm |
| Centering Diameter | 67.5 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 30 mm |
| Outer diameter | 360 mm |
| Height | 45.1 mm |
| Number of mounting bores | 1 |
Important compatibility info
| Paired article numbers | FCA7842 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
- 2x Borg & Beck Mounting, control/trailing arm (BSK8149)
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 26.6 x 23.5 |
| Outer diameter | 242 mm |
| Function | Clutch Kit |
| Number of Teeth | 23 |
| Type | Clutch Kit |
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Port / Connector type | 2 PIN |
| Replaces | BWP3007 |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Connector Shape | D Shape |
Important compatibility info
| Centering Diameter | 75 mm |
| Type | Brake Disc Rotor |
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Function | Brake Disc |
| Quantity | 1 |
| Brake Disc Thickness | 24 mm |
| Height | 66.3 mm |
| Outer diameter | 345 mm |
| Number of Holes | 5 |
| Minimum thickness | 22.5 mm |
| Placement on Vehicle | Rear Axle |
| Replaces | BBD6176S |
| Number of mounting bores | 1 |
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 18 |
Important compatibility info
| External Teeth, Diff.Side | 26 |
| Function | Drive Shaft |
| Length | 920 mm |
| External Teeth, Wheel Side | 27 |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
Important compatibility info
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Brake Disc Thickness | 28 mm |
| Outer diameter | 316 mm |
| Number of Holes | 5 |
| Height | 50.4 mm |
| Minimum thickness | 25 mm |
| Centering Diameter | 68 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Number of mounting bores | 5 |
Important compatibility info
| Bearing Code | Gen 3 |
| Outer diameter 1 | 150 mm |
| Width 1 | 101 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
Important compatibility info
| Number of Teeth | 24 |
| Hub Profile | 20.4 x 18.2 |
| Outer diameter | 215 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Parts | 3 -part |
| Replaced by | HK2072 |
Important compatibility info
| Height | 77 mm |
| Type | Brake Disc Rotor |
| Rotor Style | Vented |
| Function | Brake Disc |
| Brake Disc Thickness | 36 mm |
| Number of Holes | 5 |
| Minimum thickness | 34.4 mm |
| Quantity | 1 |
| Centering Diameter | 79 mm |
| Outer diameter | 348 mm |
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 1 |
| Placement on Vehicle | Front Axle |
| Replaces | BBD5938S |
Important compatibility info
| Rotor Style | Solid |
| Outer diameter | 296 mm |
| Minimum thickness | 13 mm |
| Centering Diameter | 76 mm |
| Height | 69.6 mm |
| Number of Holes | 6 |
| Function | Brake Disc |
| Quantity Unit | Set |
| Brake Disc Thickness | 16 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
| Inspection Tag | ECE R90 Homologated |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































