Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 90 mm |
| Additional Information 2 | with seal ring |
| Type | Water Separator, fuel system |
| Function | Water Separator, fuel system |
| External Thread Size | M80 x 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.34
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 19981 |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Replaces | 06484 |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.35
Important compatibility info
| Function | Holder, exterior mirror |
| Type | Holder, exterior mirror |
| Driver Position | for left-hand/right-hand drive vehicles |
| Material | PA (polyamide) |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.35
Important compatibility info
| Paired article numbers | 172153 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 1070 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.35
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
| Opening Temperature | 102 °C |
| Additional Information | with temperature sensor, with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.35
Important compatibility info
| Length | 195.5 mm |
| Colour | Black |
| Outer diameter 1 | 8 mm |
| Outer diameter 2 | 24 mm |
| Stroke | 38.5 mm |
| Function | Buffer, engine mounting |
| Type | Buffer, engine mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.36
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 374 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 11.8 mm |
| Outer diameter | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.36
Important compatibility info
| Type | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 205 mm |
| Spanner Size | 30 |
| Paired article numbers | 186129 |
| Internal Thread Size | M20 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.36
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 240 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.36
Important compatibility info
| Outer diameter | 65 mm |
| Function | Repair Kit, v-ribbed belt tensioner |
| Width of castor bearing surface | 24 mm |
| Type | Repair Kit, v-ribbed belt tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.37
Important compatibility info
| for OE number | 06J 906 051 F |
| Number of Connectors / Ports | 3 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.37
Important compatibility info
| Internal Thread Size | M14 x 2, M12 x 1,75 |
| Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Material | Aluminium |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.37
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Front |
| Material | Aluminium, Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.38
Important compatibility info
| Wire Diameter | 12.5 mm |
| Length | 327 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 143 mm. 98 mm. 106 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.38
Important compatibility info
| External Thread Size | M6 x 1,25 |
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
| Paired article numbers | 107802 |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.38
Important compatibility info
| for OE number | 2 214 444 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.38
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.38
Important compatibility info
| Additional Information 2 | with ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (100594)
- 1x Febi Rolling Bearing, suspension strut support mount (39491)
£29.38
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 44780 |
| Number of Connectors / Ports | 2 |
| Resistance | 1250 Ohm |
| Cable Length | 130 mm. 160 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.40
Important compatibility info
| Inner diameter | 13 mm |
| Material | Rubber/Metal |
| Outer diameter | 35 mm |
| Thickness | 40 mm |
| Width | 35 mm |
| Length | 35 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.40
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Length | 150 mm |
| Additional Information | with holder |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Width | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.40
Important compatibility info
| Track rollers material | Plastic |
| Width | 25 mm |
| Outer diameter | 60 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.41
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Thickness | 80 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.41
Important compatibility info
| Thickness | 80 mm |
| Function | Bushing, axle beam |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.41
Important compatibility info
| Material | Metal |
| Thickness | 0.5 mm |
| Bore Diameter | 71.8 mm |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
| Seal Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.41
Important compatibility info
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Thickness | 70 mm |
| Inner diameter | 14.3 mm |
| Outer diameter | 80.3 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Lower, Front, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.41
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 320 mm |
| Material | Steel |
| Rod/Strut | Guide Rod |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 17 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.41
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (44661)
- 1x Febi Rolling Bearing, suspension strut support mount (44491)
£29.41
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 16 138 399 80 |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.42
Important compatibility info
| Length | 2220 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.42
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023