Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 22.4 x 20 |
Number of Teeth | 20 |
Outer diameter | 240 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7606 |
Placement on Vehicle | Front Axle Right, Upper |
Important compatibility info
Function | Centre Rod Assembly |
Pipe Diameter | 38 mm |
Thread Measurement 2 | M24X1.5 |
Length | 996 mm |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Thread Measurement 1 | M30X1.5 RHT |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Version | Fitting Kit |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7077 |
Placement on Vehicle | Rear Axle Right, Upper |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7810)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7811)
- 1x Borg & Beck Fastening Bolt, control arm (BSK7718)
Important compatibility info
Water Pump Pulley Diameter | 110 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Number of Ribs | 6 |
Operating Mode | Mechanical |
Water Pump Type | for v-ribbed belt use |
Impeller Diameter | 82.5 mm |
Type | Water Pump, engine cooling |
Important compatibility info
Version | Fitting Kit |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7078 |
Placement on Vehicle | Rear Axle Left, Upper |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7810)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7811)
- 1x Borg & Beck Fastening Bolt, control arm (BSK7718)
Important compatibility info
Placement on Vehicle | Front |
Function | Wiper Motor |
Type | Wiper Motor |
Voltage | 12 V |
Additional Information | with rod assembly |
Important compatibility info
Material | PE (Polyethylene) |
Inner diameter 2 | 51 mm |
Colour | Black |
Inner diameter 1 | 51 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Important compatibility info
Function | Water Pump, engine cooling |
Housing material | Aluminium |
Number of Ribs | 7 |
Water Pump Pulley Diameter | 100 mm |
Type | Water Pump, engine cooling |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter 2 | 92 mm |
Function | Wheel Bearing Kit |
Outer diameter 1 | 150 mm |
Additional Information 2 | with integrated ABS sensor |
Width 1 | 53.5 mm |
Number of Teeth, ABS ring | 48 |
Type | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Important compatibility info
Inner diameter 2 | 37 mm |
Material | PE (Polyethylene) |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Colour | Black |
Inner diameter 1 | 37 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1005S)
Important compatibility info
Seal Diameter | 30 mm |
Length | 569 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Teeth, Diff.Side | 27 |
Int. teeth, diff.side, conn.to transm. | 26 |
Important compatibility info
Important compatibility info
Material | PE (Polyethylene) |
Colour | Black |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 2 | 54 mm |
Inner diameter 1 | 54 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
Material | Silicone |
Colour | Black |
Inner diameter 2 | 64 mm |
Function | Charge Air Hose |
Inner diameter 1 | 64 mm |
Type | Charge Air Hose |
Important compatibility info
Hub Profile | 20.9 x 18.4 |
Outer diameter | 226 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Replaces | HK7811 |
Number of Teeth | 18 |
Important compatibility info
Outer diameter | 295 mm |
Function | Brake Disc |
Centering Diameter | 67 mm |
Minimum thickness | 19.4 mm |
Brake Disc Thickness | 22 mm |
Height | 42.7 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity Unit | Set |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Function | Water Pump & Timing Belt Kit |
Type | Water Pump & Timing Belt Kit |
Number of Teeth | 141 |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Length | 523 mm |
External Teeth, Wheel Side | 36 |
Function | Drive Shaft |
Important compatibility info
Inner diameter | 10 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Length | 294 mm |
Type | Mounting, engine |
Function | Mounting, engine |
Placement on Vehicle | Lower Right |
Important compatibility info
Additional Information | with central slave cylinder |
Number of Parts | 3 -part |
Hub Profile | 19.7 x 17 |
Inlet Diameter | 5.00 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 17 |
Important compatibility info
Rotor Style | Solid |
Number of Holes | 4 |
Outer diameter | 238 mm |
Minimum thickness | 7 mm |
Centering Diameter | 52.3 mm |
Additional Information 2 | with groove, with ABS sensor ring, with wheel bearing |
Height | 74.6 mm |
Function | Brake Disc |
Surface | Coated |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Brake Disc Thickness | 8 mm |
Quantity | 1 |
Important compatibility info
Function | Auxiliary water pump (cooling water circuit) |
Port / Connector type | 3 PIN |
Type | Auxiliary water pump (cooling water circuit) |
Voltage | 12 V |
Connector Shape | Oval |
Replaces | BWP3071 |
Important compatibility info
Height | 53 mm |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Impeller Diameter | 72 mm |
Type | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Important compatibility info
Outer diameter | 240 mm |
Number of Teeth | 26 |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Parts | 2 -part |
Important compatibility info
Hub Profile | 28.8 x 25.4 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Teeth | 21 |
Type | Clutch Kit |
Important compatibility info
Number of Parts | 3 -part |
Number of Teeth | 28 |
Hub Profile | 22.1 x 20.3 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Length | 710 mm |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Important compatibility info
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 830 mm |
Important compatibility info
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 745 mm |
Important compatibility info
Length | 866 mm |
Thread Measurement 1 | M24X1.5 |
Thread Measurement 2 | M30X1.5 |
Rod/Strut | Push Rod |
Pipe Diameter | 38 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Important compatibility info
Length 1 | 958 mm |
Length 2 | 956 mm |
Length 3 | 1199 mm |
Length 4 | 1157 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Width | 32 mm |
Quantity Unit | Set |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Number of Parts | 3 -part |
Number of Teeth | 24 |
Hub Profile | 25.4 x 22.8 |
Outer diameter | 225 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Type | Water Pump, engine cooling |
Additional Information 2 | non-switchable water pump |
Number of Ribs | 6 |
Impeller Diameter | 80 mm |
Water Pump Pulley Diameter | 109 mm |
Important compatibility info
Material | Steel |
Type | Oil sump |
Function | Oil sump |
Important compatibility info
Length 1 | 917 mm |
Length 2 | 1275 mm |
Length 3 | 927 mm |
Length 4 | 1186 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Surface | Coated |
Outer diameter | 300 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 62 mm |
Minimum thickness | 24 mm |
Brake Disc Thickness | 26 mm |
Height | 49.5 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Placement on Vehicle | Front Axle |
Brake Disc Thickness | 30 mm |
Outer diameter | 360 mm |
Height | 60.6 mm |
Number of Holes | 5 |
Function | Brake Disc |
Centering Diameter | 61.9 mm |
Minimum thickness | 28 mm |
Rotor Style | perforated/vented |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Number of mounting bores | 2 |
Important compatibility info
Width | 39 mm |
Quantity Unit | Set |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Brake System | WABCO PAN19(-1/-1+) |
Important compatibility info
Number of Teeth | 23 |
Hub Profile | 25.9 x 23.1 |
Outer diameter | 241 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Number of Parts | 2 -part |
Type | Clutch Kit |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Lower, Front |
Length | 388 mm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7834 |
Material | Aluminium |
Steering arm type | Control Arm |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8151)
Important compatibility info
Outer diameter | 385 mm |
Function | Brake Disc |
Centering Diameter | 67.9 mm |
Minimum thickness | 33.5 mm |
Brake Disc Thickness | 36 mm |
Height | 61 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 316 mm |
Brake Disc Thickness | 28 mm |
Height | 78.4 mm |
Minimum thickness | 26.4 mm |
Centering Diameter | 78.8 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Outer diameter | 330 mm |
Height | 137 mm |
Centering Diameter | 194 mm |
Brake Disc Thickness | 34 mm |
Brake Disc Type | Vented |
Number of Holes | 6 |
Type | Brake Disc |
Function | Brake Disc |
Minimum thickness | 28 mm |
Important compatibility info
Length | 893 mm |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Thread Measurement 2 | M30X1.5 |
Pipe Diameter | 40 mm |
Thread Measurement 1 | M22X1.5 |
Rod/Strut | Push Rod |
Important compatibility info
Type | Tie Rod |
Function | Tie Rod |
Length | 1630 mm |
Pipe Diameter | 34 mm |
Important compatibility info
Function | Centre Rod Assembly |
Thread Measurement 2 | M20X1.5 |
Length | 904 mm |
Pipe Diameter | 40 mm |
Thread Measurement 1 | M30X1.5 RHT |
Rod/Strut | Push Rod |
Type | Centre Rod Assembly |
Important compatibility info
Pipe Diameter | 40 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Thread Measurement 2 | M20X1.5 |
Length | 955 mm |
Rod/Strut | Push Rod |
Thread Measurement 1 | M30X1.5 RHT |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023