Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.68 kg |
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid, with heat shield |
| for OE number | 8K0 121 405 R |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.65
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| Weight | 1.75 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 120 mm |
| Outer diameter | 40 mm |
| Thread Type | with right-hand thread |
| Cone Size | 32 mm |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Additional Information | with sleeve, with lock nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (27481)
- 1x Febi Nut (26529)
£29.65
Important compatibility info
| Weight | 0.10 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.66
Important compatibility info
| Cable Length | 3930 mm |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Resistance | 1750 Ohm |
| Type | Sensor, wheel speed |
| Weight | 0.214 kg |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.66
Important compatibility info
| Additional Information | with drive shaft bolt |
| Weight | 1.036 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 82 mm |
| Inner diameter | 43 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with nut, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (05919)
- 1x Febi Clamping Bolt, ball joint (17532)
- 1x Febi Nut (05360)
- 1x Febi Wheel Bearing (05918)
£29.66
Important compatibility info
| Weight | 4.132 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 266 mm |
| Thickness | 27.1 mm |
| Brake Disc Thickness | 13 mm |
| Minimum thickness | 11 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.67
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 175 mm |
| Width | 135 mm |
| Material | PU (Polyurethane) |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.416 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (173192)
- 2x Febi Rubber Buffer, suspension (170450)
£29.67
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 2.5 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 230 mm |
| Thickness | 40.3 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.67
Important compatibility info
| Weight | 0.057 kg |
| Length | 535 mm |
| Number of Connectors / Ports | 3 |
| Cable Length | 475 mm |
| Function | Sensor, camshaft position |
| Placement on Vehicle | Intake Side |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.67
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear, Upper |
| Material | Rubber/Metal |
| Outer diameter | 51 mm |
| Thickness | 48 mm |
| Inner diameter | 14.1 mm |
| Weight | 0.250 kg |
| Shape/Form | slotted |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.67
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 134.6 mm |
| Width | 87.7 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.1 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate |
| Type | Brake Pad Set, disc brake |
| Weight | 2.392 kg |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.67
Important compatibility info
| Weight | 1.140 kg |
| Height | 452 mm |
| Outer diameter | 181 mm |
| Inner diameter | 152 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.68
Important compatibility info
| Type | Handle, bonnet release |
| Length | 172 mm. 155 mm |
| Function | Handle, bonnet release |
| Weight | 0.108 kg |
| Mounting points diameter | 9.5 mm |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.68
Important compatibility info
| Weight | 0.333 kg |
| Paired article numbers | 179886 |
| Placement on Vehicle | Front Axle Right |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.68
Important compatibility info
| Weight | 1.204 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 150 mm |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.69
Important compatibility info
| Weight | 1.126 kg |
| Material | Cast Aluminium |
| Number of Teeth | 26 |
| Number of Wings | 5 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| Replaces | 25284 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.69
Important compatibility info
| Additional Information 2 | with quick couplers |
| Weight | 0.524 kg |
| Placement on Vehicle | Lower Left |
| Cooling Hose | from radiator to water pipe |
| Type | Radiator Hose |
| Function | Radiator Hose |
| for OE number | 5Q0 122 051 AL |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.69
Important compatibility info
| Outer diameter | 38 mm |
| Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Extra Description | febi Plus |
| Height | 61 mm |
| Additional Information | for multi-plate clutch |
| Additional Information 2 | with bolts/screws, with top |
| Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Inner diameter | 5 mm |
| Weight | 0.1 kg |
| Clutch ID | Haldex Gen IV |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.69
Important compatibility info
| Weight | 0.983 kg |
| Material | Cast Aluminium |
| Number of Wings | 14 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.69
Important compatibility info
| Weight | 3.130 kg |
| Placement on Vehicle | Rear Axle |
| Width | 52 mm |
| Outer diameter | 254 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 6 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.70
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Weight | 1.088 kg |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (32645)
- 1x Febi Rolling Bearing, suspension strut support mount (22498)
£29.70
Important compatibility info
| Weight | 0.01 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 75 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.70
Important compatibility info
| Type | Connecting Rod, air compressor |
| Weight | 0.165 kg |
| Function | Connecting Rod, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.72
Important compatibility info
| Weight | 0.125 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.72
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 128.9 mm |
| Width | 48 mm |
| Wear Warning Contact | excl. wear warning contact |
| Thickness/Strength 1 | 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 1.64 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.72
Important compatibility info
| Weight | 3.150 kg |
| Placement on Vehicle | Front Axle |
| Length | 193.3 mm. 194.6 mm |
| Width | 64.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.72
Important compatibility info
| Weight | 0.596 kg |
| for OE number | 55196190 |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.72
Important compatibility info
| Additional Information | with fastening/mounting material |
| Weight | 0.65 kg |
| Extra Description | ProKit |
| Height | 126 mm |
| Width | 110 mm |
| Rated Power | 48 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 72 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 3071 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.73
Important compatibility info
| Weight | 0.839 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.74
Important compatibility info
| Weight | 0.026 kg |
| Number of Connectors / Ports | 4 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
| for OE number | 03G 906 051 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.74
Important compatibility info
| Function | Ball Joint |
| External Thread Size | M16 x 1,5 |
| Type | Ball Joint |
| Weight | 0.591 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.74
Important compatibility info
| Function | Radiator Hose |
| Extra Description | ProKit |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 60 mm |
| Additional Information 2 | with clamps |
| Weight | 0.7 kg |
| Type | Radiator Hose |
| Hose Length | 480 mm |
| Wall Thickness | 6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (101421)
- 2x Febi Hose Clamp (48356)
£29.75
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| Weight | 0.069 kg |
| Material | FPM (fluoride rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.75
Important compatibility info
| Length | 760 mm |
| Placement on Vehicle | Rear Axle |
| Number of Connectors / Ports | 2 |
| Quantity | 2 |
| Type | Warning Contact Set, brake pad wear |
| Function | Warning Contact Set, brake pad wear |
| Weight | 0.062 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.75
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 8 |
| Weight | 0.66 kg |
| Material | Cast Aluminium |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.75
Important compatibility info
| Length | 3120 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Weight | 0.332 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.76
Important compatibility info
| Weight | 0.52 kg |
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 96 |
| Timing Chain Size | G68HR, G68AM |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.76
Important compatibility info
| Length | 52 mm |
| Material | Plastic, Metal |
| Inner diameter | 8.4 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.045 kg |
| Function | Knock Sensor |
| Type | Knock Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.76
Important compatibility info
| Function | Roller Guide, sliding door |
| Placement on Vehicle | Centre, Right |
| Outer diameter | 30 mm. 22 mm |
| Paired article numbers | 171779 |
| Weight | 0.756 kg |
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.77
Important compatibility info
| Type | Splash Guard, brake disc |
| Weight | 0.205 kg |
| Paired article numbers | 174919 |
| Placement on Vehicle | Front Axle Left |
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.77
Important compatibility info
| Weight | 2.95 kg |
| Placement on Vehicle | Front Axle |
| Width | 79.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Length | 192.9 mm |
| Thickness/Strength 1 | 18.5 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
Important compatibility info
| Function | Inner Tie Rod |
| Outer diameter | 1 mm |
| Weight | 0.51 kg |
| Length | 304 mm |
| Additional Information 2 | with spacer disc |
| External Thread Size | M12 x 1,25, M14 x 1,25 |
| Type | Inner Tie Rod |
| for OE number | 45503-19185 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
Important compatibility info
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M18 x 1,5 |
| Weight | 1.600 kg |
| Placement on Vehicle | Front Axle |
| Length | 190 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Spanner Size | 27 |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
Important compatibility info
| Function | Knock Sensor |
| Type | Knock Sensor |
| Weight | 0.038 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
Important compatibility info
| Length | 200 mm |
| Type | Wide-Angle Mirror |
| Width | 190 mm |
| Weight | 0.329 kg |
| Outer/Inner Mirror | Heatable |
| Placement on Vehicle | Driver side |
| Operating Mode | Electric |
| Thickness | 43 mm |
| Material | ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate) |
| Function | Wide-Angle Mirror |
| Camber Radius | 300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
Important compatibility info
| Outer diameter | 35 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Placement on Vehicle | Front Axle |
| Weight | 1.38 kg |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
Important compatibility info
| Weight | 0.55 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 67 mm |
| Thickness | 90 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 163 mm |
| Width | 66.9 mm |
| Additional Information 2 | with anti-squeak plate |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Weight | 2.520 kg |
| Thickness/Strength 1 | 20.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
Important compatibility info
| Weight | 0.208 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 44 mm |
| Material | Plastic |
| Outer diameter | 109 mm |
| Inner diameter | 35 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Function | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
Important compatibility info
| Weight | 0.687 kg |
| Additional Information | with gaskets/seals |
| Height | 275 mm. 119 mm |
| Outer diameter | 119 mm |
| Inner diameter | 37 mm |
| Filter type | Filter Insert, Centrifuge |
| Inner diameter 1 | 16 mm |
| Outer diameter 1 | 97 mm |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023