Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Rotor Style | Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Centering Diameter | 75 mm |
| Minimum thickness | 28.4 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 30 mm |
| Outer diameter | 348 mm |
| Height | 73 mm |
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 1 |
Important compatibility info
| External Teeth, Diff.Side | 27 |
| Length | 497 mm |
| Seal Diameter | 30 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 24 |
| Placement on Vehicle | Front Axle Right, transmission sided |
Important compatibility info
| Transmission Type | Manual Transmission |
| Length | 886 mm |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 26 |
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 22 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1228)
Important compatibility info
| Length | 616 mm |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 29 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1511)
Important compatibility info
| External Teeth, Wheel Side | 33 |
| Length | 586 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 22 |
| Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1233)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1461)
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 118 |
| Type | Water Pump & Timing Belt Kit |
Important compatibility info
| Length 1 | 901 mm |
| Length 2 | 1264 mm |
| Length 3 | 978 mm |
| Length 4 | 1275 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 629 mm |
| Length 2 | 992 mm |
| Length 3 | 787 mm |
| Length 4 | 1085 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Additional Information | without gaskets/seals |
| Additional Information 2 | with sensor |
| Opening Temperature | 88 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Housing material | Plastic |
| Function | Thermostat, coolant |
Important compatibility info
| Bearing Code | Gen 3 |
| Placement on Vehicle | Rear Axle |
| Outer diameter 1 | 140 mm |
| Width 1 | 100 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Important compatibility info
| Function | Thermostat, coolant |
| Housing material | Aluminium |
| Housing Type | with housing |
| Additional Information | with gaskets/seals |
| Opening Temperature | 87 °C |
| Type | Thermostat, coolant |
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Replaced by | BBT213 |
Important compatibility info
| External Teeth, Wheel Side | 29 |
| Length | 639 mm |
| External Teeth, Diff.Side | 29 |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Number of Teeth, ABS ring | 48 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1444)
Important compatibility info
| Type | Cable Pull, manual transmission |
| Length 1 | 743 mm |
| Length 2 | 1044 mm |
| Length 3 | 747 mm |
| Length 4 | 1076 mm |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Outer diameter | 326 mm |
| Brake Disc Thickness | 30 mm |
| Height | 53 mm |
| Number of Holes | 5 |
| Minimum thickness | 28 mm |
| Centering Diameter | 58 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Function | Brake Disc |
| Centering Diameter | 63.5 mm |
| Minimum thickness | 23.0 mm |
| Number of Holes | 5 |
| Outer diameter | 315 mm |
| Height | 48 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 28 mm |
| Quantity | 1 |
| Rotor Style | Vented |
| Number of mounting bores | 1 |
Important compatibility info
| Rotor Style | Vented |
| Brake Disc Thickness | 30 mm |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Outer diameter | 330 mm |
| Height | 52 mm |
| Placement on Vehicle | Front Axle |
| Number of Holes | 5 |
| Minimum thickness | 28 mm |
| Centering Diameter | 69 mm |
| Number of mounting bores | 2 |
Important compatibility info
| Material | Aluminium |
| Function | Oil sump |
| Type | Oil sump |
| Additional Information 2 | with bore for oil-level sensor |
Important compatibility info
| Steering arm type | Control Arm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7821 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8144)
Important compatibility info
| Minimum thickness | 16.4 mm |
| Centering Diameter | 68.9 mm |
| Quantity Unit | Set |
| Function | Brake Disc |
| Outer diameter | 324 mm |
| Brake Disc Thickness | 18 mm |
| Height | 62.5 mm |
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Number of Holes | 5 |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 3 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 22.4 x 20 |
| Number of Teeth | 20 |
| Outer diameter | 240 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Thermostat, coolant |
| Housing material | Plastic |
| Housing Type | with housing |
| Opening Temperature | 87 °C |
| Type | Thermostat, coolant |
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Port / Connector type | 2 PIN |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Connector Shape | D Shape |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Inner Brake Drum Height | 62 mm |
| Inner Brake Drum Diameter | 254 mm |
| Br. Drum outer diameter | 303 mm |
| Overall Height | 83 mm |
| Function | Brake Drum |
| Type | Brake Drum |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7329 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7885)
Important compatibility info
| Type | Tie Rod |
| Function | Tie Rod |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Rod/Strut | Push Rod |
| Thread Measurement 2 | M30X1.5 |
| Length | 848 mm |
| Thread Measurement 1 | M20X1.5 |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Thread Measurement 2 | M30X1.5 LHT |
| Thread Measurement 1 | M30X1.5 RHT |
| Length | 495 mm |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Pipe Diameter | 40 mm |
| Thread Measurement 2 | M20X1.5 |
| Length | 1066 mm |
| Thread Measurement 1 | M30X1.5 RHT |
Important compatibility info
| Type | Centre Rod Assembly |
| Pipe Diameter | 38 mm |
| Rod/Strut | Push Rod |
| Length | 860 mm |
| Thread Measurement 1 | M20X1.5 |
| Thread Measurement 2 | M30X1.5 |
| Function | Centre Rod Assembly |
Important compatibility info
| Length | 680 mm |
| Thread Measurement 1 | M27X1.5 |
| Rod/Strut | Push Rod |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
Important compatibility info
| Thread Measurement 1 | M30X1.5 |
| Thread Measurement 2 | M24X1.5 |
| Length | 953 mm |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
Important compatibility info
| Type | Centre Rod Assembly |
| Thread Measurement 1 | M30X1.5 |
| Pipe Diameter | 50 mm |
| Rod/Strut | Push Rod |
| Thread Measurement 2 | M24X1.5 |
| Length | 995 mm |
| Function | Centre Rod Assembly |
Important compatibility info
| Length | 828 mm |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Length | 784 mm |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 715 mm |
| Length 4 | 914 mm |
| Length 3 | 1079 mm |
| Length 2 | 709 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7174 |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 2 | 760 mm |
| Type | Cable Pull, manual transmission |
| Length 1 | 1045 mm |
| Length 4 | 713 mm |
| Length 3 | 994 mm |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7551 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5444)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Length | 388 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | FCA7835 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8151)
Important compatibility info
| Surface | Coated |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Height | 46.8 mm |
| Outer diameter | 335 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Centering Diameter | 70.1 mm |
| Quantity Unit | Set |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 5 |
| Inspection Tag | ECE R90 Homologated |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Height | 47.4 mm |
| Outer diameter | 320 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.4 mm |
| Centering Diameter | 69 mm |
| Quantity | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Replaces | BBD5238 |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Brake Disc Thickness | 26 mm |
| Outer diameter | 294 mm |
| Number of Holes | 6 |
| Height | 32.6 mm |
| Minimum thickness | 24 mm |
| Centering Diameter | 88 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Height | 66 mm |
| Outer diameter | 294 mm |
| Brake Disc Thickness | 22 mm |
| Centering Diameter | 67 mm |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Number of Holes | 5 |
| Minimum thickness | 20.4 mm |
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rotor Style | Vented |
| Outer diameter | 302 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 72.5 mm |
| Minimum thickness | 26.4 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 28 mm |
| Height | 38.2 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Upper Right |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7643 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8160)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7642 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8160)
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Number of Holes | 5 |
| Outer diameter | 320 mm |
| Brake Disc Thickness | 22 mm |
| Height | 80 mm |
| Minimum thickness | 20.4 mm |
| Centering Diameter | 75 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Placement on Vehicle | Rear Axle |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Height | 44.5 mm |
| Outer diameter | 315 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Centering Diameter | 85 mm |
| Quantity Unit | Set |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 2 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































