Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.262 kg |
| Placement on Vehicle | both sides |
| Length | 560 mm |
| Housing Diameter | 18 mm |
| Eject Force | 290 N |
| Stroke | 221 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Housing length | 305.5 mm |
| Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Material | Plastic |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 10 mm |
| Mounting points diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
| Weight | 0.35 kg |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.883 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 028 121 004 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 470 mm |
| Paired article numbers | 193491 |
| Weight | 0.246 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1375 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.075 kg |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Weight | 0.177 kg |
| Inner diameter 2 | 79 mm |
| Inner diameter 1 | 25 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 105 mm |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (188120)
- 1x Febi Molybdenum Grease (02582)
£31.52
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 129 mm |
| Material | Steel |
| Spanner Size | 19 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.38 kg |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 2.29 kg |
| Placement on Vehicle | Front Axle |
| Length | 324 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Outer diameter | 144 mm |
| Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 60 mm. 65 mm |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Weight | 0.23 kg |
| Hose Length | 330 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.96 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 223 mm |
| Thickness | 79 mm |
| Spanner Size | 22 |
| Paired article numbers | 41901 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Wheel Side |
| Length | 139 mm |
| Outer diameter | 80 mm |
| Internal Teeth, wheel side | 29 |
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 43 |
| Weight | 1.760 kg |
| Seal Diameter | 49 mm |
| External Thread Size | M18 x 1,5 |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Weight | 0.14 kg |
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Outer diameter | 185 mm |
| Thickness | 13 mm |
| Inner diameter | 135 mm. 145 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 394 mm |
| Outer diameter | 138 mm |
| Weight | 2.01 kg |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 11.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 1.59 kg |
| Replaces | 17804 |
| Material | Plastic |
| Voltage | 12 V |
| Colour | Black |
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with hazard warning light function, with indicator function, with high beam function, with headlight flasher |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 1.2 kg |
| Outer diameter | 110 mm |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Thickness | 68 mm |
| Function | Mounting, engine |
| Internal Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
| Replaces | 28169; 28170 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Additional Information 2 | with cap, with screw |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Material | Metal |
| Outer diameter | 78 mm |
| Weight | 0.5 kg |
| Width of castor bearing surface | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 75 mm |
| Cone Size | 32 mm |
| Weight | 1.8 kg |
| Thickness | 127 mm |
| Thread Type | with right-hand thread |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M26 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 559 mm |
| Min. Length | 344 mm |
| Pipe Diameter | 39 mm. 51 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber |
| Weight | 4.1 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 2.039 kg |
| Placement on Vehicle | Front Axle, Centre |
| Length | 521 mm |
| Cone Size | 14.6 mm |
| Pipe Diameter | 30 mm |
| Function | Tie Rod |
| Type | Tie Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Type | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 205 mm |
| Spanner Size | 30 |
| Paired article numbers | 186129 |
| Weight | 0.122 kg |
| Internal Thread Size | M20 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023