Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.986 kg |
| Int. teeth, diff.side, conn.to transm. | 34 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Weight | 0.95 kg |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (07479)
- 2x Febi Holder, brake camshaft seal ring (07480)
- 1x Febi Holder, brake camshaft seal ring (08472)
- 3x Febi Shaft Seal, brake camshaft (07481)
- 1x Febi Shaft Seal, brake camshaft (07482)
- 1x Febi Stop Plate, adjuster (07483)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (07485)
- 1x Febi Spacer, brake shaft (07486)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Spacer, brake shaft (07489)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07491)
- 2x Febi Circlip (07492)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01094)
£31.52
Important compatibility info
| Weight | 0.848 kg |
| Material | Cast Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Aluminium |
| Seal Material | Paper |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Replaces | 37413 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.296 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188443)
- 2x Febi Protective Cap/Bellow, shock absorber (192650)
£31.52
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 30 |
| Weight | 1.898 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.34 kg |
| Thickness | 1.74 mm |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.217 kg |
| Function | Hose, air supply |
| Extra Description | febi Plus |
| Type | Hose, air supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Thread Size | M10x1,5 |
| Internal Teeth, wheel side | 28 |
| Weight | 2.134 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Outer diameter | 107 mm |
| Weight | 0.24 kg |
| Spanner Size | 36 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Extra Description | febi Plus |
| Height | 312 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 351 mm |
| Function | Suspension Spring |
| Outer diameter | 152 mm |
| Weight | 2.48 kg |
| Wire Diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Type | Joint Kit, drive shaft |
| Weight | 1.8 kg |
| Internal Teeth, wheel side | 22 |
| Seal Diameter | 51 mm |
| External Teeth, Wheel Side | 25 |
| Outer diameter | 80 mm |
| Length | 141 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Function | Joint Kit, drive shaft |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Function | Cable Repair Set, boot lid |
| Number of circuits | 9 |
| Cable Length | 600 mm |
| Extra Description | febi Plus |
| Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Length | 246.5 mm |
| Valve stem diameter | 9.450 mm |
| Valve head diameter | 40 mm |
| Weight | 0.188 kg |
| Notches / Holes Number | 1 |
| Type | Exhaust Valve |
| Function | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Stroke | 190 mm |
| Weight | 0.2 kg |
| Eject Force | 390 N |
| Housing Diameter | 18 mm |
| Mounting points diameter | 16.5 mm |
| Length | 534 mm |
| Housing length | 305 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.041 kg |
| Control Type | Rocker Actuation |
| Number of Connectors / Ports | 6 |
| Function | Switch, differential lock |
| Voltage | 24 V |
| Type | Switch, differential lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.217 kg |
| Placement on Vehicle | both sides |
| Length | 450 mm |
| Housing Diameter | 18 mm |
| Eject Force | 455 N |
| Stroke | 144 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Paired article numbers | 24886 |
| Colour | Black |
| Function | Exterior Door Handle |
| Weight | 0.780 kg |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Additional Information 2 | with top, with screw |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Material | Metal |
| Outer diameter | 78 mm |
| Weight | 0.5 kg |
| Width of castor bearing surface | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 2.9 kg |
| Placement on Vehicle | Front Axle |
| Length | 360 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.8 mm |
| Type | Suspension Spring |
| Outer diameter | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.262 kg |
| Placement on Vehicle | both sides |
| Length | 560 mm |
| Housing Diameter | 18 mm |
| Eject Force | 290 N |
| Stroke | 221 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Housing length | 305.5 mm |
| Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.505 kg |
| Hose Length | 480 mm |
| Placement on Vehicle | Upper |
| Inner diameter | 40 mm. 49 mm. 55 mm. 8 mm |
| Function | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Internal Thread Size | M125 x 2 |
| Weight | 0.630 kg |
| Spanner Size | 110 |
| Type | Protection Lid, wheel hub |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Number of Coils | 4.6 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Outer diameter | 145 mm |
| Length | 322 mm |
| Weight | 1.5 kg |
| Placement on Vehicle | Front Axle |
| Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 2.039 kg |
| Placement on Vehicle | Front Axle, Centre |
| Length | 521 mm |
| Cone Size | 14.6 mm |
| Pipe Diameter | 30 mm |
| Function | Tie Rod |
| Type | Tie Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.211 kg |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 559 mm |
| Min. Length | 344 mm |
| Pipe Diameter | 39 mm. 51 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber |
| Weight | 4.1 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.883 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 028 121 004 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 1.460 kg |
| Type | Repair Kit, brake camshaft |
| Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.193 kg |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Resistance | 1150 Ohm |
| Cable Length | 2690 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.530 kg |
| Placement on Vehicle | both sides |
| Length | 667 mm |
| Housing Diameter | 22 mm |
| Eject Force | 755 N |
| Stroke | 238 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 394.5 mm |
| Type | Gas Spring, boot/cargo area |
| Additional Information | with stop function |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 49 mm |
| Internal Teeth, wheel side | 21 |
| Weight | 1.860 kg |
| Type | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Function | Joint Kit, drive shaft |
| Outer diameter | 75 mm |
| Length | 147 mm |
| Placement on Vehicle | Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 60 mm. 65 mm |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Weight | 0.23 kg |
| Hose Length | 330 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.4 kg |
| Placement on Vehicle | both sides |
| Length | 282 mm |
| Additional Information | Change interval/date according to gas spring imprint |
| Housing Diameter | 19 mm |
| Eject Force | 610 N |
| Stroke | 78 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 161 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.53
Important compatibility info
| Weight | 3.000 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 17725 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.54
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 17722 |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 3.000 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.54
Important compatibility info
| Weight | 0.68 kg |
| Rod/Strut | Guide Rod |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle Left, Upper, Rear |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 37794 |
| Steering arm type | Control Arm |
| Length | 343 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.54
Important compatibility info
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 37793 |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Length | 343 mm |
| Placement on Vehicle | Rear Axle Right, Upper, Rear |
| Weight | 0.68 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.54
Important compatibility info
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Weight | 0.19 kg |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.54
Important compatibility info
| Seal Material | NBR (nitrile butadiene rubber) |
| Additional Information 2 | with oil sump gasket |
| Function | Hydraulic Filter Kit, automatic transmission |
| Filter type | Screen Filter |
| Weight | 0.340 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (101163)
- 1x Febi Gasket, automatic transmission oil sump (47381)
£31.55
Important compatibility info
| Filter type | Filter Insert |
| Type | Air Filter |
| Weight | 0.120 kg |
| Width | 107 mm |
| Height | 40 mm |
| Length | 209 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.55
Important compatibility info
| Function | Suspension Strut Support Mount |
| Weight | 1.060 kg |
| Paired article numbers | 177032 |
| Inner diameter | 12 mm |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.56
Important compatibility info
| Weight | 4.132 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 266 mm |
| Thickness | 27.1 mm |
| Brake Disc Thickness | 13 mm |
| Minimum thickness | 11 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.57
Important compatibility info
| Weight | 0.050 kg |
| Function | Resistor, interior blower |
| Number of Connectors / Ports | 9 |
| Colour | Black, White |
| Material | Plastic |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.58
Important compatibility info
| Width | 160 mm |
| Length | 285 mm |
| Function | Hydraulic Filter, automatic transmission |
| Thickness | 220 mm |
| Type | Hydraulic Filter, automatic transmission |
| Weight | 0.405 kg |
| Filter type | Screen Filter |
| Transmission Type | CVT Automatic Transmission (stepless) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.58
Important compatibility info
| Weight | 0.528 kg |
| Placement on Vehicle | Lower Front Axle, both sides |
| Outer diameter | 70 mm. 34 mm |
| Thickness | 80 mm |
| Inner diameter | 24 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.58
Important compatibility info
| Outer diameter | 84 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Width | 45 mm |
| Placement on Vehicle | Front Axle |
| Bearing Type | Angular Ball Bearing |
| Weight | 1.214 kg |
| Inner diameter | 45 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174967)
- 1x Febi Circlip (173838)
£31.60
Important compatibility info
| Weight | 0.075 kg |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Length | 625 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.61
Important compatibility info
| Weight | 1.114 kg |
| Placement on Vehicle | Left Rear |
| Width | 115 mm |
| Thickness | 85 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Outer Length | 115 mm |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.61
Important compatibility info
| Weight | 1.750 kg |
| Placement on Vehicle | Front Axle |
| Length | 167.4 mm |
| Width | 54 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.61
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
| Material | Rubber/Metal |
| Outer diameter | 73.5 mm |
| Thickness | 85 mm |
| Inner diameter | 17 mm |
| Weight | 0.325 kg |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.61
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023