Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 900 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of mounting bores | 3 |
| for OE number | 56 79 352 |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length | 1826 mm |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| Material | Rubber/Metal, Aluminium |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| for OE number | 2 214 442 |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Port / Connector type | Bosch |
| Number of Connectors / Ports | 5 |
| Version | Kompakt 1.1m |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Right |
| Length | 1715 mm |
| Paired article numbers | 171432 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 215 mm |
| Inner diameter | 177 mm |
| Number of Teeth, ABS ring | 80 |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Outer diameter | 183 mm |
| Width | 31 mm |
| Function | Brake Shoe Set, parking brake |
| Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wear Warning Contact | with acoustic wear warning |
| Thickness/Strength 1 | 17.8 mm. 17.4 mm |
| Width | 61.2 mm |
| Length | 140.7 mm |
| Additional Information 2 | with staples |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Front Axle |
| Additional Information | with retaining spring holder |
| Manufacturer | HYUNDAI KIA |
| Model | SPORTAGE TUCSON |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with ball bearing |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| for OE number | 1 900 389 S1 |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (100785)
- 1x Febi Rolling Bearing, suspension strut support mount (45037)
Important compatibility info
| Width of castor bearing surface | 22 mm |
| Width | 48 mm |
| Material | Metal |
| Outer diameter | 70 mm |
| Mounting points diameter | 10 mm |
| Type | Tensioner Pulley, v-ribbed belt |
| Function | Tensioner Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 51928489 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Strobe-type Beacon |
| Temperature range to | 65 °C |
| Housing material | Aluminium |
| Temperature range from | -40 °C |
| Height | 32 mm |
| Width | 122 mm |
| Colour | Orange |
| Rated Power | 18 W |
| Cable Length | 1500 mm |
| Voltage from | 9 V |
| Number of circuits | 4 |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Fulfils ECE norm | R10, R65 |
| Light Design | LED |
| Inspection Tag | EMC, SAE |
| Depth | 11 mm |
| Type | Strobe-type Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 8 |
| Control Type | Rotary Operation |
| Function | Ignition Switch |
| Extra Description | febi Plus |
| Type | Ignition Switch |
| Replaces | 37342 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | 30713417 |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 30 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Inner diameter | 11 mm |
| Mounting points diameter | 11 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Tie Rod |
| Function | Tie Rod |
| Steering | with tie rod end |
| Paired article numbers | 176726 |
| Additional Information | with fastening/mounting material |
| Length | 445 mm |
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (109582)
- 1x Febi Inner Tie Rod (100791)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















