Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Length | 615 mm |
| External Teeth, Wheel Side | 25 |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 22 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1608)
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
| Length | 605 mm |
| External Teeth, Wheel Side | 30 |
| Number of Teeth, ABS ring | 48 |
| External Teeth, Diff.Side | 28 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1223)
Important compatibility info
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Number of Ribs | 5 |
| Type | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 68 mm |
| Operating Mode | Mechanical |
| Additional Information 2 | switchable water pump |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 619 mm |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 33 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Length 1 | 1465 mm |
| Length 2 | 1147 mm |
| Length 3 | 1065 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 707 mm |
| Length 2 | 1054 mm |
| Length 3 | 770 mm |
| Length 4 | 1127 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Function | Thermostat, coolant |
| Housing material | Plastic |
| Type | Thermostat, coolant |
| Additionally Required Parts | FTS3091 |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
| Replaces | BBT396 |
Important compatibility info
| Version | With fittings(ex.KP) |
| Paired article numbers | FCA7951 |
| Diameter | 18 mm |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Upper |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 666 mm |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 26 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Length | 959 mm |
| External Teeth, Diff.Side | 26 |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 36 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 958 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 23 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Number of Gears | for forwards gear |
| Length 1 | 1161 mm |
| Length 2 | 825 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7170 |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Number of Teeth | 22 |
| Hub Profile | 25.2 x 22.3 |
| Outer diameter | 228 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 23 |
| Number of Parts | 2 -part |
| Hub Profile | 24.2 x 21.9 |
| Outer diameter | 240 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
| Number of Teeth | 21 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Solid |
| Surface | Coated |
| Number of Holes | 4 |
| Outer diameter | 268 mm |
| Minimum thickness | 10 mm |
| Centering Diameter | 55.9 mm |
| Additional Information 2 | with groove, with ABS sensor ring, with wheel bearing |
| Height | 73.3 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 12 mm |
| Quantity | 1 |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 22.4 x 20 |
| Outer diameter | 240 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Brake System | MERITOR ELSA 225-3 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Important compatibility info
| Width 1 | 97 mm |
| Bearing Code | Gen 3 |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 140 mm |
| Inner diameter 1 | 25 mm |
| Placement on Vehicle | Rear Axle Right |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















