Proud to be a UK-based company
Contact us
Important compatibility info
| Housing material | Aluminium |
| Additional Information 2 | with seal ring |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.72
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Thickness | 40 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Outer diameter | 253 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.73
Important compatibility info
| Material | Sheet Steel |
| Paired article numbers | 184213 |
| Additional Information 2 | with bearing |
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 139.4 mm |
| Width | 92.3 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.7 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 193 mm |
| Width | 75 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.73
Important compatibility info
| Width of castor bearing surface | 30 mm |
| Material | Plastic |
| Outer diameter | 76 mm |
| Number of Ribs | 6 |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.73
Important compatibility info
| Type | Mount, exhaust system |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Metal |
| Function | Mount, exhaust system |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.73
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 184212 |
| Steering arm type | Triangular Control Arm (CV) |
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.73
Important compatibility info
| Material | Plastic |
| Opening Temperature | 83 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.74
Important compatibility info
| Colour | Beige |
| Length | 271 mm |
| Material | Plastic |
| Placement on Vehicle | Interior Door Panel, Left |
| Type | Door Handle, interior equipment |
| Paired article numbers | 184836 |
| Extra Description | febi Plus |
| Function | Door Handle, interior equipment |
| Additional Information | without cladding |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.74
Important compatibility info
| Placement on Vehicle | Interior Door Panel, Right |
| Colour | Beige |
| Extra Description | febi Plus |
| Type | Door Handle, interior equipment |
| Paired article numbers | 184614 |
| Function | Door Handle, interior equipment |
| Additional Information | without cladding |
| Material | Plastic |
| Length | 271 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.74
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 026 129 589 A S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.74
Important compatibility info
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Number of Wings | 5 |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.74
Important compatibility info
| Length | 190 mm |
| Width | 180 mm |
| Material | Rubber/Metal |
| Inner diameter | 15 mm |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 75 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (32916)
- 1x Febi Rolling Bearing, suspension strut support mount (29475)
£33.75
Important compatibility info
| Width | 25.4 mm |
| Number of Teeth | 116 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.75
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.76
Important compatibility info
| Material | ACM (Polyacrylate), Carbon Fibre |
| Turbocharger line | Charge air cooler to intake manifold |
| Additional Information 2 | with quick couplers |
| Function | Charge Air Hose |
| Placement on Vehicle | Charge Air Cooler, Left |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.76
Important compatibility info
| Sensor Type | Differential Pressure Sensor |
| Function | Sensor, exhaust pressure |
| Type | Sensor, exhaust pressure |
| for OE number | 1 369 263 |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.76
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 260 mm |
| Thickness | 35 mm |
| Brake Disc Thickness | 8 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.76
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 11360-1HC3A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.76
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023