Proud to be a UK-based company
Contact us
Important compatibility info
| Internal Thread Size | M42 x 1,5 |
| Thickness | 178 mm |
| Pressure | 20 bar |
| Function | Air Dryer Cartridge, compressed-air system |
| Outer diameter | 137 mm |
| Thread Type | with right-hand thread |
| Type | Air Dryer Cartridge, compressed-air system |
| Additional Information 2 | with seal ring, without integrated oil separator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.16
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 995 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.16
Important compatibility info
| Type | Connecting Rod, air compressor |
| Inner diameter 1 | 19 mm |
| Hole Spacing | 88.5 mm |
| Inner diameter 2 | 32 mm |
| Function | Connecting Rod, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.16
Important compatibility info
| for OE number | 33 50 6 882 820 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.16
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 377 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 105 mm |
| Paired article numbers | 196518 |
| Thread Length | 17 mm |
| Steering | with tie rod end |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.16
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 377 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 105 mm |
| Paired article numbers | 196517 |
| Thread Length | 17 mm |
| Steering | with tie rod end |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.16
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.16
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Brake Disc Thickness | 11 mm |
| Outer diameter | 280 mm |
| Thickness | 40.8 mm |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 9 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.17
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 44271 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.17
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 44270 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.17
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 51 mm |
| Outer diameter | 295 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3.5 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.17
Important compatibility info
| Function | Relay Valve |
| Internal Thread Size | M22 x 1,5, M16 x 1,5 |
| Number of Connectors / Ports | 4 |
| Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.17
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 206 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.8 mm |
| Function | Brake Pad Set, disc brake |
| Width | 80 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.17
Important compatibility info
| Length | 528 mm |
| Housing Diameter | 22 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Stroke | 200 mm |
| Mounting points diameter | 16.5 mm |
| Housing length | 295.5 mm |
| Eject Force | 600 N |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.18
Important compatibility info
| External Thread Size | M10 x 1 |
| for OE number | 06J 906 051 C |
| Additional Information 2 | High-pressure Side |
| Number of Connectors / Ports | 3 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.18
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.18
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Width | 56.6 mm |
| Length | 155.7 mm |
| Wear Warning Contact | incl. wear warning contact |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.19
Important compatibility info
| Operating Mode | Mechanical |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.19
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 42 |
| Internal Teeth, wheel side | 29 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.19
Important compatibility info
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.19
Important compatibility info
| Height | 198 mm |
| Outer diameter | 70 mm |
| Inner diameter | 25 mm |
| Filter type | Filter Insert |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.20
Important compatibility info
| Material | ACM (Polyacrylate) |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.20
Important compatibility info
| Placement on Vehicle | Lower Right |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.21
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1960 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| for OE number | 46814965 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.22
Important compatibility info
| Function | Pressure Limiting Valve |
| Internal Thread Size | M16 x 1,5 |
| Type | Pressure Limiting Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.22
Important compatibility info
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | 175979 |
| Material | Rubber/Metal |
| Inner diameter | 19.8 mm |
| Additional Information | with holder |
| Placement on Vehicle | Front Axle Right, Rear |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.22
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Width | 10 mm |
| Number of Teeth | 53 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
| Units / Pulleys | Oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.22
Important compatibility info
| Outer diameter 1 | 61 mm |
| Outer diameter 2 | 94 mm |
| Bearing Type | Needle Bearing |
| Type | Bush, steering knuckle |
| Function | Bush, steering knuckle |
| Inner diameter | 52 mm |
| Thickness | 77 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.23
Important compatibility info
| Paired article numbers | 181045 |
| Additional Information | with lock nut |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Function | Tie Rod |
| Type | Tie Rod |
| Length | 345 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.23
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M16 x 1,5 |
| Function | Tie Rod |
| Type | Tie Rod |
| Length | 345 mm |
| Additional Information | with lock nut |
| Paired article numbers | 181037 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.23
Important compatibility info
| Function | Suspension, propshaft |
| Width | 36 mm |
| Outer diameter | 50 mm |
| Hole Spacing | 160 mm |
| Additional Information 2 | with rolling bearing |
| Thickness | 105 mm |
| Bearing Type | Rolling Bearing |
| Type | Suspension, propshaft |
| Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.24
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.24
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 11277 |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower Front Axle, Left |
| Replaces | 12153 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.25
Important compatibility info
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt |
| Surface | Coated |
| Number of Teeth | 103 |
| Function | Timing Belt |
| Width | 15.9 mm. 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.25
Important compatibility info
| Type | Sensor, fuel pressure |
| Number of Connectors / Ports | 3 |
| External Thread Size | M10 x 1 |
| Function | Sensor, fuel pressure |
| for OE number | 13 53 8 643 665 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.25
Important compatibility info
| Outer diameter | 384 mm |
| Height | 75 mm |
| Inner diameter | 160 mm |
| Placement on Vehicle | Rear Axle |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.25
Important compatibility info
| Function | Expansion Tank, coolant |
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sensor, coolant level (37648)
£36.26
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Inner diameter | 16 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.26
Important compatibility info
| Number of Ribs | 12 |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.26
Important compatibility info
| Paired article numbers | 178083 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Left |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.27
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178082 |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.27
Important compatibility info
| Placement on Vehicle | Left, Centre, Rear Axle |
| Material | Rubber/Metal |
| Outer diameter | 70.4 mm |
| Thickness | 60 mm |
| Inner diameter | 12.5 mm |
| Paired article numbers | 181385 |
| Inner diameter 2 | 15 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.27
Important compatibility info
| Placement on Vehicle | Right, Centre, Rear Axle |
| Inner diameter | 12.5 mm |
| Thickness | 60 mm |
| Outer diameter | 70.2 mm |
| Material | Rubber/Metal |
| Paired article numbers | 181383 |
| Inner diameter 2 | 15 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.27
Important compatibility info
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 07928 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.27
Important compatibility info
| Function | Timing Chain |
| Timing Chain Size | G68VH |
| Number of Chain Links | 74 |
| Chain Type | Simplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
| Placement on Vehicle | Right |
| Replaces | 40275 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.28
Important compatibility info
| Width | 41.2 mm |
| Operating Mode | Mechanical |
| Housing material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.28
Important compatibility info
| Material | Plastic |
| Additional Information 2 | with sensor |
| Type | Thermostat Housing |
| Function | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.28
Important compatibility info
| Additional Information 2 | with piston clip |
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm |
| Width | 74.2 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.29
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 4 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.29
Important compatibility info
| Max. Length | 258 mm |
| Min. Length | 190 mm |
| Pipe Diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 12 mm |
| Mounting points diameter | 22 mm |
| Placement on Vehicle | Front and Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.30
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023