Proud to be a UK-based company
Contact us
Important compatibility info
| Bore Diameter | 22.5 mm |
| Fill Medium | Brake Fluid |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 8E0 721 257 B, 8E0 721 257 M |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.40
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178199 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Brake caliper piston diameter | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.41
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 32 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178198 |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.41
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 192.2 mm. 193 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20 mm. 19 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Width | 79.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.41
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
| for OE number | 037 121 010 C |
| Hub external diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.42
Important compatibility info
| Cable Length | 800 mm |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 109547 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.42
Important compatibility info
| Type | Repair Kit, control/trailing arm |
| Placement on Vehicle | Rear Axle, Front |
| Additional Information 2 | with retaining ring |
| Steering arm type | for trailing arm |
| Function | Repair Kit, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.42
Important compatibility info
| Width | 29 mm |
| Outer diameter | 80 mm |
| Inner diameter | 10 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Material | Metal |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.43
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Rated current | 0.41 A |
| Inner thread 1 | M12 x 1,5 mm |
| Type | Solenoid Valve |
| Function | Solenoid Valve |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.43
Important compatibility info
| Internal Thread Size | M14 x 1,5, M22 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Length | 104 mm |
| Height | 72 mm |
| Width | 72 mm |
| Type | Hand Feed Pump |
| Function | Hand Feed Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.43
Important compatibility info
| Function | Tensioner Lever, v-ribbed belt |
| External Thread Size | M12 |
| Length | 200 mm |
| Type | Tensioner Lever, v-ribbed belt |
| for OE number | 403 150 05 72 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner Lever, v-belt (08933)
- 1x Febi Clamping Piece, v-ribbed belt tensioner (08934)
- 1x Febi Nut (08935)
£33.44
Important compatibility info
| Additional Information | with rubber mounts, with lock nut |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43067 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.44
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Type | Repair Kit, brake caliper |
| Function | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.44
Important compatibility info
| Placement on Vehicle | engine sided |
| Width | 45 mm |
| Outer diameter | 72 mm |
| Inner diameter | 16 mm |
| Number of Ribs | 6 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.44
Important compatibility info
| Additional Information | with lock nut, with rubber mounts |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43069 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.44
Important compatibility info
| Brake Disc Thickness | 9 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 34 mm |
| Outer diameter | 252 mm |
| Rotor Style | solid |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 8 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Centering Diameter | 62 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.44
Important compatibility info
| Parameter | 6PK |
| Width | 26 mm |
| Outer diameter | 153 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Function | Belt Pulley, crankshaft |
| Replaces | 32254 |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.45
Important compatibility info
| Length | 105 mm |
| Outer diameter | 42 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.45
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 6 -Hole |
| Rotor Style | Solid |
| Function | Brake Disc |
| Surface | Coated |
| Number of mounting bores | 2 |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Thickness | 40.6 mm |
| Brake Disc Thickness | 10 mm |
| Centering Diameter | 60 mm |
| Outer diameter | 264 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.45
Important compatibility info
| Length | 640 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023