Important compatibility info
Type | Clutch Kit |
Hub Profile | 20.4 x 20 |
Function | Clutch Kit |
Number of Parts | 3 -part |
Number of Teeth | 24 |
Additional Information | with central slave cylinder |
Important compatibility info
Material | Steel |
Additional Information 2 | without ball joint |
Steering arm type | Control Arm |
Only in connection with | BSK8124, FSK8124 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
Inner diameter 1 | 39 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Colour | Black |
Inner diameter 2 | 39 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1001S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1104S)
Important compatibility info
Length 1 | 1452 mm |
Function | Cable Pull, manual transmission |
Length 2 | 1086 mm |
Type | Cable Pull, manual transmission |
Length 3 | 1325 mm |
Length 4 | 1012 mm |
Important compatibility info
Material | Steel |
Additional Information 2 | without ball joint |
Steering arm type | Control Arm |
Only in connection with | BSK8124, BSK8125, FSK8124, FSK8125 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
Type | Tie Rod |
Length | 1547 mm |
Function | Tie Rod |
Important compatibility info
Function | Water Pump, engine cooling |
Height | 82 mm |
Type | Water Pump, engine cooling |
Additional Information 2 | with sensor |
Number of Holes | 3 |
Number of Ribs | 6 |
Impeller Diameter | 54 mm |
Water Pump Pulley Diameter | 97 mm |
Water pump impeller material | Plastic |
Important compatibility info
External Teeth, Diff.Side | 27 |
Length | 590 mm |
External Teeth, Wheel Side | 26 |
Placement on Vehicle | Front Axle Right |
Function | Drive Shaft |
Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1197)
Important compatibility info
Additional Information | with central slave cylinder |
Function | Clutch Kit |
Number of Teeth | 24 |
Type | Clutch Kit |
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Inner diameter 1 | 55 mm |
Colour | Black |
Inner diameter 2 | 55 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Colour | Black |
Inner diameter 1 | 60 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 2 | 60 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1109S)
Important compatibility info
External Teeth, Wheel Side | 29 |
External Teeth, Diff.Side | 26 |
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Function | Drive Shaft |
Length | 692 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1263)
Important compatibility info
Function | Drive Shaft |
Transmission Type | 6-Speed Manual Transmission |
External Teeth, Diff.Side | 26 |
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
External Teeth, Wheel Side | 29 |
Length | 693 mm |
Important compatibility info
Number of Teeth | 28 |
Hub Profile | 22.1 x 20.4 |
Outer diameter | 228 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Parts | 3 -part |
Important compatibility info
Type | Centre Rod Assembly |
Length | 1833 mm |
Pipe Diameter | 50 mm |
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Important compatibility info
Length 2 | 742 mm |
Length 3 | 1010 mm |
Length 4 | 742 mm |
Length 1 | 990 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Pipe Diameter | 46 mm |
Rod/Strut | Push Rod |
Thread Measurement 2 | M24X1.5 |
Thread Measurement 1 | M30X1.5 |
Length | 926 mm |
Important compatibility info
Function | Water Pump, engine cooling |
Number of Wings | 12 |
Number of Inlets / Outlets | 4 |
Impeller Diameter | 125 mm |
Type | Water Pump, engine cooling |
Important compatibility info
Type | Starter |
Voltage | 12 V |
Number of Teeth | 10 |
Rotation Direction | Anticlockwise rotation |
Rated Power | 1 kW |
Number of mounting bores | 2 |
Function | Starter |
Important compatibility info
Type | Drive Shaft |
External Teeth, Diff.Side | 30 |
Placement on Vehicle | Front Axle Left |
External Teeth, Wheel Side | 29 |
Length | 650 mm |
Function | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1467)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023