Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 152 mm |
| Inner diameter | 16 mm |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 66 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Function | Seal, windscreen |
| Type | Seal, windscreen |
| Styling | without trim strip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 33 mm |
| Outer diameter | 66 mm |
| Inner diameter | 35 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22544)
- 1x Febi Air Filter (14056)
- 1x Febi Filter, cabin air (11566)
- 1x Febi Fuel filter (21622)
- 1x Febi Screw Plug, oil sump (15374)
Important compatibility info
| Outer diameter | 243 mm |
| Thickness | 81 mm |
| Function | Gear Lever Gaiter |
| Type | Gear Lever Gaiter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Charge Air Cooler, Left |
| Wall Thickness | 4.5 mm |
| Function | Charge Air Hose |
| Additional Information 2 | with clamps |
| Inner diameter | 70 mm |
| Type | Charge Air Hose |
| Turbocharger line | Charge air cooler to intake manifold |
| Material | AEM (Ethylene Acrylate Rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (103083)
- 1x Febi Fastening Clamp, charge air hose (39026)
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 1 439 900 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, camshaft position |
| Length | 24 mm |
| Number of Connectors / Ports | 3 |
| Outer diameter | 17.62 mm |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 143.6 mm |
| Width | 83 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.9 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 174043 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Thermostat, coolant |
| Opening Temperature | 90 °C |
| Housing Type | with housing |
| Additional Information | with gasket/seal |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Pressure | 8.5 bar |
| Type | Quick Release Valve |
| Function | Quick Release Valve |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Beige |
| Length | 271 mm |
| Material | Plastic |
| Placement on Vehicle | Interior Door Panel, Left |
| Type | Door Handle, interior equipment |
| Paired article numbers | 184836 |
| Extra Description | febi Plus |
| Function | Door Handle, interior equipment |
| Additional Information | without cladding |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 131 mm |
| Outer diameter | 83 mm |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 60 mm |
| Internal Teeth, wheel side | 28 |
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 50 |
| Type | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 165 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Inner diameter | 93 mm |
| Outer Length | 135 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
| Thickness | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 137 mm |
| Width | 57.4 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Number of wear indicators | 1 Per Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 272 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| for OE number | 5Q0 615 601 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Trailing Arm |
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
| Additional Information | with spacer ring |
| Additional Information 2 | with spacer disc, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| for OE number | 98 117 866 80 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Port / Connector type | PRS |
| Length | 181 mm |
| Placement on Vehicle | Left |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R91 |
| Cable Length | 500 mm |
| Function | End Outline Marker Light |
| Voltage to | 24 V |
| Mounting bores distance | 78 mm |
| Light Design | LED |
| Protection Type (IP Code) | IP67 |
| Voltage from | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















