Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 174045 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.71
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1600 Ohm |
| Cable Length | 925 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Paired article numbers | 107380 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.71
Important compatibility info
| Brake System | ATE |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179093 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.71
Important compatibility info
| Number of Connectors / Ports | 3 |
| Sensor Type | Differential Pressure Sensor |
| Type | Sensor, exhaust pressure |
| Function | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.71
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 58 0239 1886 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.72
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.73
Important compatibility info
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.73
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 30 |
| Number of Teeth, ABS ring | 44 |
| ABS Ring Diameter | 70 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.73
Important compatibility info
| Paired article numbers | 32444 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.74
Important compatibility info
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 32443 |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.74
Important compatibility info
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 1 |
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.74
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Plastic |
| Outer diameter | 126 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Function | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.74
Important compatibility info
| Width | 40.5 mm |
| Outer diameter | 102 mm |
| Inner diameter | 61 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Replaces | 34823 |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Axle Bolt, drive shaft (26511)
- 1x Febi Screw (31324)
- 1x Febi Wheel Bearing (30270)
£33.75
Important compatibility info
| Type | Cable Pull, parking brake |
| Length | 1975 mm |
| Placement on Vehicle | Rear |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.75
Important compatibility info
| Type | Oil Dipstick |
| Length from grip collar to max. marking | 568 mm |
| Length from grip collar to min. marking | 587 mm |
| Extra Description | febi Plus |
| Function | Oil Dipstick |
| Additional Information | with guide funnel/tube |
| Colour | Orange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Dipstick (47303)
- 1x Febi Tube, oil dipstick (180728)
£33.75
Important compatibility info
| Length | 435 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, inner |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.75
Important compatibility info
| Filter type | Spin-on Filter, with water drain screw |
| Function | Fuel filter |
| Internal Thread Size | 3/8" - 16 UNF |
| Height | 196 mm |
| Outer diameter | 85 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.76
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm |
| Thickness | 43.2 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.76
Important compatibility info
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Length | 501 mm |
| Placement on Vehicle | both sides |
| Eject Force | 380 N |
| Housing Diameter | 18 mm |
| Stroke | 191 mm |
| Mounting points diameter | 17.8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 279.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.76
Important compatibility info
| Number of mounting bores | 3 |
| Function | Central Slave Cylinder, clutch |
| Type | Central Slave Cylinder, clutch |
| for OE number | 56 79 335 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.76
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023